All Products

SKU: PI-ESP004

This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a board with 0.1" pins, a voltage regulator, 2 LEDs and a button. It's thin, small, an...

SKU: AF-4718

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: SF-DEV-27877 · MPN: DEV-27877

The Br V2 is a breakout board for Alchitry headers, giving you access to all the signal pins through solder-friendly 0.1" holes. It is designed to make wiring, prototyping and adding your own circuitry easier when working with an Alchitry board.This is the wide version, recommended for most uses ...

SKU: SF-DEV-27876 · MPN: DEV-27876

The Br V2 is a simple breakout board for Alchitry boards, making the signal pins on the Alchitry headers easier to access for prototyping, wiring and soldered projects.All signal pins are brought out to 0.1" easy-to-solder holes, so you can connect jumper wires, headers or your own circuitry with...

SKU: PR-PIM374

This crisp 1.12″ monochrome OLED breakout features a 128×128 pixel white-on-black display, ideal for adding graphing, readouts, and basic icons to your project. OLEDs deliver excellent contrast and brightness, and this compact module fits easily into space-constrained builds. The breakout connec...

SKU: AF-1870

A simple sewable breakout board with a CR2032 coin cell battery holder pre-soldered on and 0.1" pitch breakout pins for easy connection. Ideal for powering very low-current projects or adding a battery backup circuit to a real-time clock or similar module. Key Features CR2032 Coin Cell Holder ...

SKU: LB-COCKATOO-V2

The Cockatoo v2 is a simple breakout board for the BBC micro:bit, designed for school projects involving basic lighting circuits. Slide the micro:bit into the edge connector and access three pins — Pin 2, 3.3 V, and GND — for quick, solderless connections to LEDs and other simple components. Key...

SKU: SF-BOB-16998 · MPN: BOB-16998

Add a reversible USB-C connector to your project without hand-soldering the tiny SMD pads. This horizontal breakout makes it easier to bring USB-C power and data connections onto a prototype or custom build.The board breaks out the USB-C connector’s VBUS, GND, CC1, CC2, D+ and D- pins to 0.1" pit...

SKU: AF-1868

A simple breakout board with a CR1220 coin cell battery holder pre-soldered and broken out to 0.1″ pitch pins. Ideal for powering very low-current projects or providing battery backup for a real-time clock (RTC) module. Comes fully assembled and tested, with a stick of 0.1″ header included so yo...

SKU: SF-SEN-15335

The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely low-power sensor supporting both I2C and SPI communication, suited for wearable...

SKU: AF-3533

The Adafruit 0.96" 160×80 Colour TFT Display Breakout is a tiny, high-density full-colour screen driven by the ST7735R controller. Despite its thumbnail size, it packs 160×80 RGB pixels and communicates over 4-wire SPI, making it compatible with virtually any microcontroller — even those with lim...

SKU: DF-SEN0407

The LIS331HH is an ultra-low-power high precision triple-axis linear accelerometer with 16-bit data output. It has user selectable full scales of ±6g/±12g/±24g and is capable of measuring accelerations with output data from 0.5Hz to 1kHz. Its power consumption is as low as 10μA. The device contai...

SKU: AF-6050 · MPN: ADA6050

This compact breakout is made for slim USB-C projects where a standard horizontal or vertical connector would sit too high. Its sunken Type-C connector straddles the PCBA, helping keep your build low profile while still breaking out the contacts you need.USB-C gives you a reversible connector, ex...

SKU: SF-BOB-11722

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a footprint for the R/G version! Simply solder an encoder down to the board and you’r...

SKU: SF-BOB-11189

The ‘must have’ IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.We’ve taken the SOIC package MAX3232 and broken out all the pins you need to set up your RS232 to TTL connection. We’ve also...

SKU: FT-PIBR

The PiBreak from Freetronics is a prototyping board for the Raspberry Pi, providing labelled breakout pins for all GPIOs, a large solder-pad prototyping area, and GND and 3.3 V power rails for easy connections. Compatible with Raspberry Pi models that have a 26-pin expansion header, including th...

SKU: SF-SEN-14571

It’s time to start utilizing the superior magnetometer, and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor board capable of sensing very small fields (like the Earth’s magnetic field), whil...

SKU: SF-BOB-17110 · MPN: BOB-17110

USB-C is handy for modern projects, but its 24 tiny, tightly spaced pins are not friendly to hand soldering or quick prototyping. This breakout board routes the essential USB-C connections out to a standard 0.1" (2.54mm) pitch so you can work with them on breadboards, perfboards and other prototy...

SKU: SF-PRT-10588

Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.

SKU: AF-6014 · MPN: ADA6014

This compact breakout board is designed for the Raspberry Pi 5 and Adafruit RP2350 boards that use an HSTX connector. These boards use a 22-pin FPC connection to carry high-speed video data over differential pairs, and this breakout gives you a handy way to adapt that interface for a custom setup...