All Products

SKU: AF-258

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you need a larger battery, we also have a 2500mAh+ modelThe batteri...

SKU: LB-00238

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh.The batteries come pre-attached with a genuine 2-pin JST-PH connector a...

SKU: DF-DFR0535

DFRobot is launching a brand new series - Sunflower, focusing on high-efficiency, small power solar energy management for IoT projects and renewable energy applications.   Solar Power Manager is a complete small power and high-efficiency solar power management module. It fea...

SKU: AF-4755

The Adafruit Universal USB/DC/Solar Lithium Ion/Polymer Charger (bq24074) charges 3.7V/4.2V LiPo or LiIon batteries from virtually any power source — USB Type-C, DC adapter, or solar panel — with a wide 5–10V input range. Its near-MPPT solar tracking automatically draws the maximum current availa...

SKU: AF-5705

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member of the fourth generation of Witty Pi, and it is designed to work with 3.7V Lith...

SKU: DF-DFR0535-1 · MPN: DFR0535-1

Build a compact off-grid power supply for embedded electronics, IoT nodes and low-power projects with this solar power management kit from DFRobot. It combines a Solar Power Manager board for 9V/12V/18V panels with a compact 9V 220mA solar panel.The controller integrates constant-voltage MPPT sol...

SKU: AF-259

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-volta...

SKU: AF-2011

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2000mAh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteriesThe batteries ...

SKU: AF-390

This versatile LiIon/LiPo battery charger accepts power from three sources: a 6 V solar panel (via 2.1 mm DC jack), USB Mini-B, or a 5 V DC adapter. It features automatic charging current tracking that draws the maximum possible current from a solar panel in any light condition, providing near-MP...

SKU: DF-DFR0682

Have you ever been disrupted by a sudden power outage while working? If so, the LattePanda UPS Hat is your best choice!The LattePanda UPS Hat is compatible with the LattePanda 2 Alpha, Delta, and 3 Delta pins and can be installed directly. It uses three 18650 lithium-ion batteries as UPS storage ...

SKU: AF-1570

A compact 3.7 V lithium-ion polymer (LiPo) battery with approximately 100 mAh capacity (0.4 Wh). Thin, lightweight, and powerful, this cell is suited for small wearable projects, IoT devices, and compact electronics where space is limited. The battery comes pre-wired with a genuine 2-pin JST-PH ...

SKU: DF-DFR0559-1

Note: Includes Solar Power Manager 5V and Semi Flexible Monocrystalline Solar Panel (5V 1A). The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application...

SKU: AF-1904

The Adafruit Micro Lipo with MicroUSB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Micro USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: SF-PRT-13855

A slim, lightweight 3.7V 2000 mAh lithium-ion battery terminated with a standard 2-pin JST-PH connector (2 mm pin spacing). Built-in protection circuitry guards against overvoltage, overcurrent, and undervoltage conditions. Key Features Capacity – 2000 mAh at 3.7V nominal Connector – 2-pin JS...

SKU: AF-3898

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 400mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiP...

SKU: AF-328

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2500mAh for a total of about 10 Wh. If you need a smaller battery, we also have a 1200mAh model The batter...

SKU: AF-4236

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. The battery includes built-in protection circuitry that guards against overchar...

SKU: TB-SB1770

These high capacity batteries are used in many desktop and notebook computers to retain date, time and configuration information while the computer is switched off. They are also useful where long shelf life is important or when the battery is to be fitted into difficult or sealed access areas. ...

SKU: LB-LS2065

Item Name: LED Solar LampEmitted Color: White (6000K-6500K)&nbsp;LED QTY:20LEDsSolar panel: 0.65W 17% efficiency&nbsp;Li-ion battery: 2.22WH / 1200mAh&nbsp;LED Type:2835 SMD&nbsp;Lumens: 350LM-500LM&nbsp;Delay time:10s&nbsp;Night Sensor:<10Lux&nbsp;Switch: OFF/AUTO&nbsp;Waterproof: IP65&nbsp;LED ...

SKU: AF-353

A high-capacity 3.7 V lithium-ion battery pack built from three 2200 mAh 18650 cells connected in parallel, providing 6600 mAh of total capacity. The cells are spot-welded to a built-in protection circuit that guards against overcharging, over-discharging, and overcurrent. The pack includes a JS...