All Products

SKU: SF-KIT-13927

The LilyPad Sewable Electronics Kit is an introduction to the world of e-textiles and electronic sewing. Through a series of guided projects, you'll learn to sew basic circuits, light up LEDs, control them with buttons and switches, and experiment with a pre-programmed LilyMini circuit that react...

SKU: KI-2715

A starter kit for e-textiles and wearable electronics from Kitronik's Electro-Fashion range. This Discovery Pack includes a curated selection of sewable components — LEDs, switches, coin cell holders, conductive thread, and batteries — everything you need to begin adding electronics to fabric pro...

SKU: LB-00211

The E-Textiles Rainbow LED strip contains seven LilyPad-style sewable LEDs in six colours, connected in a snap-apart strip. Break off individual LEDs as needed and sew them into clothing, accessories, or craft projects using conductive thread. Each LED board has its colour printed on the back fo...

SKU: SF-DEV-14010

A pack of five pink LilyPad LEDs designed for wearable electronics and e-textile projects. The LEDs come attached to one another on a snap-apart strip, ready to be sewn into clothing, accessories, or fabric-based circuits using conductive thread. Each LED features an ultra-thin 0.8 mm PCB with l...

SKU: SF-BOK-14270

The full-color LilyPad Sewable Electronics Kit Guidebook contains step-by-step instructions for creating four interactive projects from the materials contained in the kit. Examples and circuits are provided and explained. The manual also includes a glossary and troubleshooting tips. Once you m...

SKU: LB-LR0183

A LilyPad-compatible microcontroller board based on the ATmega32U4, designed for e-textile and wearable electronics projects. The built-in USB communication allows the board to appear as a mouse, keyboard, or virtual serial port when connected to a computer — no separate USB-to-serial adapter nee...

SKU: DF-DFR0167-G

A pack of five green LEDs designed for the LilyPad wearable electronics platform. Each LED is mounted on a thin, sewable PCB with large connecting pads, making it easy to stitch into clothing and e-textile projects with conductive thread. Key Features Green LEDs – Bright, visible output for we...

SKU: SF-DEV-14013

A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0.8 mm PCB lies flat against fabric. Key Features 5× Red LEDs – Snap-apart stri...

SKU: SF-DEV-13342

The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimize snagging and profile, with wi...

SKU: AF-1222

The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable enough to dedicate to every build. Program it over USB with the Arduino IDE and bri...

SKU: LB-LR0309-45

A 1-metre length of soft conductive sewing thread made from stainless steel, designed for wearable electronics projects. Use it to sew electrical connections between LilyPad components, sewable LEDs, and batteries — replacing traditional wires with flexible, stitchable conductors. Key Features ...

SKU: DF-DFR0199-G

The LilyPad LED Micro is a tiny surface-mount LED board designed for e-textile and wearable electronics projects. At just 3.2 × 1.6mm, it's one of the smallest ways to add a point of light to your LilyPad creations — perfect for elegant designs or sheer fabrics where you need minimal weight and b...

SKU: SF-DEV-11262

The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project. The ProtoSnap LilyPad Development...

SKU: SF-DEV-11364

The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs ...

SKU: LB-LR0220

Light up your E-Textile projects with this set of 5 E-Textile Compatible LED modules. With a working voltage of 3V - 5V and a current of 40mA, these LEDs are perfect for adding a touch of brightness to your wearable electronics. Each module is compatible with the popular Lilypad platform, making ...

SKU: SF-DEV-13902

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by L...

SKU: AF-1850

Add a touch of sparkle to your wearables with the Adafruit Gemma Sequin Starter Pack. This beginner-friendly kit includes a GEMMA V2 sewable microcontroller, warm white LED sequins, conductive thread, needles, and a coin cell battery holder — everything you need to start sewing glowing electronic...

SKU: SF-DEV-14012

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Le...

SKU: DF-DFR0199-Y

A pack of five yellow LilyPad LED Micro boards for e-textile projects. These tiny LEDs are a smaller alternative to the standard LilyPad LED board — ideal for elegant designs and sheer fabrics where minimal size and weight are important. The boards come in a strip of five that can be snapped apa...

SKU: LB-BK-LR0347A

A sewable coin cell battery holder with built-in on/off slide switch, designed for e-textile and wearable electronics projects. This bulk 10-pack is ideal for classrooms, workshops, and makerspaces. Each holder accepts a standard 20 mm coin cell battery (CR2032) and features sewable tabs for eas...