All Products

SKU: LB-LR0183

A LilyPad-compatible microcontroller board based on the ATmega32U4, designed for e-textile and wearable electronics projects. The built-in USB communication allows the board to appear as a mouse, keyboard, or virtual serial port when connected to a computer — no separate USB-to-serial adapter nee...

SKU: SF-DEV-13342

The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimize snagging and profile, with wi...

SKU: SF-DEV-11262

The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project. The ProtoSnap LilyPad Development...

SKU: SF-DEV-11893

The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery and sewing skills! With this LilyPad Simple Power, you should find no trouble in ...

SKU: SF-DEV-14346

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap Plus is easy with the free Arduino software you’ll need to program the ATmega32...

SKU: SF-DEV-13735

Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a broad variety of colors. Each of the colors in the RGB LED are connected to one of the sew tabs on the board labeled R, G, and B.The color channels on ...

SKU: DF-DFR0200

The LilyPad SimpleSnap is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken down, it's also a great way to prototype! The SimpleSnap board is similar to the LilyPad Simple board, and has the same functionality except for two major dif...

SKU: SF-DEV-11013

The LilyPad MP3 Player is an all-in-one audio board combining an Arduino-compatible microcontroller, MP3 decoder, microSD card socket, and stereo amplifier. Part of the LilyPad e-textiles line, it's designed to add music and sound effects to fabric creations, wearables, and interactive projects. ...

SKU: SF-DEV-11364

The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs ...

SKU: WS-30915 · MPN: 30915

Enhance your Raspberry Pi Compute Module 5's capabilities with our cutting-edge Mini Dual Gigabit Ethernet Base Board/Mini-Computer Kit – the perfect companion for all variants of CM5, enabling a wide array of networking and industrial applications.Please Note: Raspberry Pi Compute Module 5 is NO...

SKU: SF-KIT-13927

The LilyPad Sewable Electronics Kit is an introduction to the world of e-textiles and electronic sewing. Through a series of guided projects, you'll learn to sew basic circuits, light up LEDs, control them with buttons and switches, and experiment with a pre-programmed LilyMini circuit that react...

SKU: DF-DFR0199-G

The LilyPad LED Micro is a tiny surface-mount LED board designed for e-textile and wearable electronics projects. At just 3.2 × 1.6mm, it's one of the smallest ways to add a point of light to your LilyPad creations — perfect for elegant designs or sheer fabrics where you need minimal weight and b...

SKU: DF-DFR0199-Y

A pack of five yellow LilyPad LED Micro boards for e-textile projects. These tiny LEDs are a smaller alternative to the standard LilyPad LED board — ideal for elegant designs and sheer fabrics where minimal size and weight are important. The boards come in a strip of five that can be snapped apa...

SKU: LB-TINY

The CJMCU card is a small microcontroller based on the ATTiny85 chipset. It is perfect for wearable projects. Also widely used in electronic projects due to its compatibility with the Arduino IDE, bringing an ATtiny85 and the necessary circuits to be programmable via USB.Programming is simple by ...

SKU: AF-6395 · MPN: ADA6395

E-Ink and E-Paper panels are excellent for projects that need a low-power, daylight-readable display. The image remains visible even when power is disconnected, giving a high-contrast, paper-like result for static information, labels, dashboards and portable builds.This is a bare 3.7-inch monochr...

SKU: SF-DEV-09350

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each board are rated for 4 volts at 300mA, but will work at 5 volts with a reduction in current. LilyPad is a wearable e-textile technology developed by Le...

SKU: DF-DFR0167-G

A pack of five green LEDs designed for the LilyPad wearable electronics platform. Each LED is mounted on a thin, sewable PCB with large connecting pads, making it easy to stitch into clothing and e-textile projects with conductive thread. Key Features Green LEDs – Bright, visible output for we...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: DF-DFR1184 · MPN: DFR1184

The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instruments ADS1115, it delivers 15-bit resolution (0.375 mV per step) with ±2 mV accu...

SKU: SF-DEV-08467

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that chann...