All Products

SKU: SS-104990023

A pack of 20 common-cathode RGB LEDs in a standard 5 mm through-hole package. Each LED contains three independent colour elements — red, green, and blue — sharing a single cathode pin. Drive each colour individually for status indicators, or use PWM to mix colours and produce any hue you need. K...

SKU: PI-COM0623

A pack of five clear 5 mm RGB LEDs with a common cathode configuration. Each LED has four pins — one for red, green, and blue, plus a shared cathode (longest pin). Drive individual colours for status indication or use PWM on all three channels to mix custom colours. Key Features Common Cathode...

SKU: SF-COM-16911 · MPN: COM-16911

Add red, green and blue indication to your project with this 5 mm through-hole RGB LED. It uses a clear lens and has four pins: one pin for each colour channel and a shared common cathode.The longest pin is the common cathode, making it straightforward to identify during assembly. You can use the...

SKU: LB-LS0014-BAG

A bulk pack of 250 through-hole RGB LEDs in a 10 mm clear epoxy package. Common cathode configuration with individually addressable red, green, and blue elements for full-colour mixing. Specifications LED Size – 10 mm, clear epoxy lens Configuration – Common cathode Forward Voltage (R / G / ...

SKU: LB-LR0013

An RGB LED module with a common-cathode full-colour LED and built-in current-limiting resistors for each channel. Control the red, green, and blue channels independently via PWM to mix any colour. Compatible with Arduino and other 5 V microcontrollers. Key Features Full-Colour RGB LED – Common...

SKU: AF-315

These clear 5 mm Piranha (super-flux) LEDs contain separate red, green, and blue chips in a single square package, allowing full RGB colour mixing. With an 80° viewing angle and a combined brightness of up to 2000 mcd, they work well as indicators, illuminators, or colour-swirl effects. The squar...

SKU: SF-DEV-13735

Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a broad variety of colors. Each of the colors in the RGB LED are connected to one of the sew tabs on the board labeled R, G, and B.The color channels on ...

SKU: AF-4660

A rugged, chrome-plated latching pushbutton with a built-in RGB LED ring. Drill a 16 mm hole in any panel up to 6.35 mm (1/4") thick and mount it securely — an included rubber gasket provides a water-resistant seal for enclosures. The flat metal actuator latches on press and releases on a second...

SKU: DF-DFR0274

The RGB LED Strip Driver Shield allows you to control 12 V RGB LED strips (common anode) directly from an Arduino. With three PWM outputs capable of up to 3 A each, the shield can drive up to 10 metres of RGB LED strip. A built-in IR receiver enables remote control operation, and an on-board fuse...

SKU: AF-5888 · MPN: ADA5888

This handy STEMMA board lets you control 'true analog' LED strips and other PWM-able LEDs from a NeoPixel-compatible data line, without the usual extra wiring of separate driver FETs. A WS2811F handles the 800KHz NeoPixel signal and drives AO3406 N-channel FETs, so a common-anode RGB strip or LED...

SKU: AF-2530

This 3W RGB LED from Adafruit delivers bright, full-colour illumination from a compact high-power package. Each red, green, and blue die handles up to 350mA continuous current (1A peak), producing a combined output of approximately 110 lumens. The LED comes pre-mounted on an aluminium PCB that s...

SKU: PI-COM0624

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors!Available in both clea...

SKU: LB-ETEXTILERGB

A sewable tri-colour RGB LED module designed for e-textiles and wearable electronics. By grounding the red, green, or blue channel pins individually or in combination, you can produce any colour. The common-anode design means each channel turns on when its pin is connected to ground. The module ...

SKU: AF-1378

The WS2811 is the driver IC used in NeoPixel LED strips and pixels. In this SOIC-8 package, it lets you build your own addressable RGB LEDs by driving a single common-anode RGB LED or three individual single-colour LEDs. Each output provides ~18 mA constant current, ensuring consistent colour reg...

SKU: EF-EF04058

A common cathode alphanumeric LED display module driven by the HT16K33 chip over I2C. The 0.56-inch digit height makes it suitable for displaying letters, numbers, and basic symbols in electronics projects and interactive displays. Key Features HT16K33 Driver – I2C bus interface for simple mic...

SKU: SF-COM-00105

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors!

SKU: LB-LS0014

Check out these big 10mm through-hole LEDs! The clear epoxy package causes these LEDs to have a bright glow. Features: Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V Forward Current: 20mA Intensity (R/G/B): 550 / 250 / 700 mcd Common Cathode This is a bag of 20 RGB LEDS

SKU: SF-COM-12999

We know this looks like a lot of our other LEDs, but it’s not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it is a lot simpler to solder into your project and is in a clear 5mm package. This ...

SKU: AF-2439

An analog LED strip featuring both RGB and warm white (~3000K) LEDs at 60 LEDs per metre on a weatherproof white flexi PCB. Control the entire strip at once using any microcontroller and four transistors (one per channel) — no addressable LED library needed, just PWM for colour mixing. Power the...

SKU: SF-COM-09264

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors!These LEDs are diffuse...