All Products

SKU: AF-3417

The FeatherWing Tripler lets you connect a Feather board to two FeatherWings side by side — no stacking headers needed. All three sets of pins are cross-connected, with dedicated GND and 3.3 V strips for easy power distribution. Additional proto holes are available for custom wiring. Comes as a ...

SKU: AF-2884

The FeatherWing Proto is a prototyping add-on board compatible with all Adafruit Feather boards. It provides duplicate breakouts for every Feather pin, a grid of proto holes for custom circuitry, and connected pad strips for GND and 3.3V — everything you need to add custom components to your Feat...

SKU: AF-4004

Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh Wi-Fi Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and co...

SKU: AF-4254

The Adafruit Quad Side-By-Side FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a linear side-by-side layout — no stacking headers needed. All four sets of Feather pins are cross-connected, so every FeatherWing shares the same bus signals, power, and grou...

SKU: AF-4253

The Adafruit Quad 2×2 FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a compact 2×2 grid layout — no stacking headers needed. All four sets of Feather pins are cross-connected, so every FeatherWing shares the same bus signals, power, and ground. Each of...

SKU: AF-2928

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...

SKU: AF-2927

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Fem...

SKU: AF-5862 · MPN: ADA5862

The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...

SKU: AF-6313 · MPN: ADA6313

Add a crisp monochrome display and simple user controls to your Feather project with this fully assembled FeatherWing. It combines a 128x64 white OLED screen with three user buttons labelled A, B and C, plus a reset button, so you can build compact menus, status displays, and handheld interfaces ...

SKU: AF-3200

The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...

SKU: AF-3243

A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Fea...

SKU: AF-2900

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feat...

SKU: AF-2922

Add datalogging capability to any Feather board with the Adalogger FeatherWing. This add-on combines a battery-backed real-time clock (PCF8523) with a microSD card socket, giving your project accurate timestamps and local data storage in one compact wing. The RTC communicates over I2C with a 32 ...

SKU: AF-3045

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assembled so you can connect a FeatherWing on top of your Feather board and let the boar...

SKU: AF-2945

The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...

SKU: AF-3036

The Adafruit RGB Matrix FeatherWing Kit lets you drive HUB75-type RGB LED matrices from any SAMD21 M0 or SAMD51 M4 Feather board. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosystem...

SKU: AF-3321

The Adafruit Mini Color TFT with Joystick FeatherWing adds a vibrant 0.96" colour display and a complete user interface to any Feather board. The 160×80 pixel TFT display supports 16-bit full colour, and the built-in 5-way navigation joystick plus two push buttons give you everything needed to bu...

SKU: AF-4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: AF-4264

Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main Feather can focus on your application logic. The ESP32 communicates over ...

SKU: AF-2890

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the Doubler so you can work with both boards si...