All Products
Showing 1-20 of 60 products
FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards
·
A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feat...
Assembled Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather
·
A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assembled so you can connect a FeatherWing on top of your Feather board and let the boar...
Adalogger FeatherWing - RTC + SD Add-on For All Feather Boards
·
Add datalogging capability to any Feather board with the Adalogger FeatherWing. This add-on combines a battery-backed real-time clock (PCF8523) with a microSD card socket, giving your project accurate timestamps and local data storage in one compact wing. The RTC communicates over I2C with a 32 ...
FeatherWing Doubler - Prototyping Add-on For All Feather Boards
·
This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the Doubler so you can work with both boards si...
FeatherWing Proto - Prototyping Add-on For All Feather Boards
·
The FeatherWing Proto is a prototyping add-on board compatible with all Adafruit Feather boards. It provides duplicate breakouts for every Feather pin, a grid of proto holes for custom circuitry, and connected pad strips for GND and 3.3V — everything you need to add custom components to your Feat...
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
·
The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...
NeoPixel FeatherWing - 4x8 RGB LED Add-on For All Feather Boards
·
The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...
Adafruit 2.9 Grayscale eInk / ePaper Display FeatherWing - 4 Level Grayscale
·
Add a versatile grayscale eInk display to your Feather project with this 2.9" FeatherWing. The 296×128 pixel panel supports four levels of grey — white, light grey, dark grey, and black — giving you more visual depth than a standard monochrome display while refreshing in about one second, far fas...
Adafruit 2.9 Tri-Color eInk / ePaper Display FeatherWing - Red Black White
·
Add a vibrant tri-colour eInk display to your Feather project with this 2.9" FeatherWing. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of colour. The FeatherW...
Monochrome 0.91" 128x32 I2C OLED Display - STEMMA QT / Qwiic
·
This compact 0.91" monochrome OLED display packs 128×32 individually controllable white pixels into a tiny, highly readable package. With no backlight needed, OLEDs deliver exceptional contrast and low power consumption — perfect for status displays, sensor readouts, and compact interfaces. The ...
Adafruit Grove and Stemma QT FeatherWing for all Feathers
·
The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...
Monochrome 0.91”128x32 I2C OLED Display
This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length is 33mm and the width is 20mm. With its small size, simple wiring and low power consumption, it can be applied to many display appl...
Adafruit FeatherWing 128x64 OLED Add-on
·
Add a crisp monochrome display and simple user controls to your Feather project with this fully assembled FeatherWing. It combines a 128x64 white OLED screen with three user buttons labelled A, B and C, plus a reset button, so you can build compact menus, status displays, and handheld interfaces ...
Adafruit 2.13 HD Tri-Color eInk / ePaper Display FeatherWing - 250x122 RW Panel with SSD1680
·
The Adafruit 2.13" HD Tri-Colour eInk FeatherWing brings electronic paper technology directly to your Feather board. Featuring a 250×122 pixel display with black, red, and white ink, this FeatherWing delivers high-contrast, daylight-readable visuals that persist even when power is completely disc...
Assembled DC Motor + Stepper FeatherWing Add-on
·
A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Fea...
TFT FeatherWing - 2.4 320x240 Touchscreen For All Feathers
·
A 2.4" TFT touchscreen display shield for the Adafruit Feather ecosystem. Featuring a 320×240 pixel display with 16-bit colour, a resistive touchscreen, and a built-in microSD card slot, this FeatherWing adds a full interactive display to any Feather board via SPI. Comes fully assembled with dua...
Adafruit ADXL343 + ADT7410 Sensor FeatherWing
·
Add motion and precision temperature sensing to any Feather board with this all-in-one sensor FeatherWing from Adafruit. It combines two high-quality Analog Devices sensors — the ADXL343 triple-axis accelerometer and the ADT7410 precision temperature sensor — on a single FeatherWing PCB. Both se...
Adafruit Mini Color TFT with Joystick FeatherWing
·
The Adafruit Mini Color TFT with Joystick FeatherWing adds a vibrant 0.96" colour display and a complete user interface to any Feather board. The 160×80 pixel TFT display supports 16-bit full colour, and the built-in 5-way navigation joystick plus two push buttons give you everything needed to bu...
Teensy 3.x Feather Adapter
·
The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...
Adafruit 2.9 Red/Black/White eInk Display Breakout - THINK INK
·
Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.9" breakout board. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of col...
