All Products

SKU: SF-COM-12792

This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don’t worry, it’s easy enough to break it where you need! Each pin has a spacing of 0.1" in between each other. Documents: Datasheet

SKU: SF-WRL-10535

These wireless transmitters work with our 315MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link. Since these are only transmitters, they will only work communicating data one-way, you would need two pairs (of differe...

SKU: SF-PRT-12900

This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with this battery holder you will gain the ability to incorporate 18650 cells into a...

SKU: AF-2831

This Photo Transistor Light Sensor is a simple sensor that detects ambient light. It's kind of the opposite of an LED - when light hits the little chip inside, it induces current to flow from the long pin to the short pin. This sensor has a built-in optical filter (probably IR filter...

SKU: SF-DEV-14285

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield is the Toshiba TB6612FNG H-Bridge Motor Driver, which allows the shield to contro...

SKU: PI-STAN-599105

Every piece of consumer electronics uses tin solder to some degree. While tin is easy to recycle the majority used in electronics still come from mines which are often located in developing countries where tin is won under hazardous conditions for people and environment alike. Fairlötet a...

SKU: PI-STAN-599102

Every piece of consumer electronics uses tin solder to some degree. While tin is easy to recycle the majority used in electronics still come from mines which are often located in developing countries where tin is won under hazardous conditions for people and environment alike. Fairlötet&n...

SKU: PR-PIM356

Make your micro:bit sing with noise:bit! It's a tiny speaker that packs a fair bit of punch, and it's perfect for BLEEPS and BLOOPS! Just slot in your micro:bit, and use the sound generation blocks and code in Microsoft MakeCode and MicroPython to generate tones, sound...

SKU: AF-3951

A 2×AA battery holder with a built-in knife switch for controlling power. Unlike typical slide switches, the knife switch provides a clear visual indicator of open and closed circuit states — making it an excellent tool for teaching basic electronics and circuit concepts. The holder takes two AA...

SKU: DF-EDU0170

The Gravity Science Data Acquisition Module Kit is a comprehensive toolkit for conducting digital scientific experiments without programming or electronics knowledge. Built around the DFRobot SCI DAQ module, it includes four sensors covering soil moisture, ambient light, temperature/humidity, and...

SKU: LB-LS6105

A hands-on STEM kit that lets kids build their own hand-cranked electricity generator. By turning the crank, children generate real electrical power, providing a practical demonstration of how mechanical energy converts into electrical energy. With a sci-fi inspired design, this DIY kit makes le...