All Products
Showing 1-20 of 60 products
Beetle ESP32 - C3 (RISC-V Core Development Board)
The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery charging management on-board — connect a Li-ion battery directly without extra charging...
Adafruit QT Py ESP32-C3 WiFi Dev Board with STEMMA QT
The Adafruit QT Py ESP32-C3 is a compact Wi-Fi and Bluetooth LE development board built around the Espressif ESP32-C3 — a RISC-V microcontroller designed as a modern replacement for the ESP8266. In the tiny QT Py form factor (Seeed Xiao compatible), it packs USB-C, Wi-Fi, BLE 5.0, a STEMMA QT con...
ESP32-C3 Mini Development Board, Based on ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5
A compact ESP32-C3 development board based on the ESP32-C3FN4 single-core RISC-V processor running at up to 160 MHz. With 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth 5 (LE), 4 MB onboard flash, and a castellated module design, it's ideal for both breadboard prototyping and direct SMD soldering to c...
Romeo ESP32-C3 Robot Control Board (Supports Wi-Fi; Bluetooth 5)
·
The Romeo Mini ESP32-C3 is a compact robot control board with an onboard ESP32-C3 module providing Wi-Fi and Bluetooth 5 dual-mode communication. It features two channels of 1.7A motor drivers, servo control, and 9 Gravity-compatible I/O interfaces — all in a tiny 47mm × 38.5mm form factor. A bu...
ESP32-C3 RISC V Developer Board - 4 MB SPI Flash
The ESP32-C3-DevKitC-02 is an entry-level RISC V development board equipped with the ESP32-C3-WROOM-02, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to t...
Seeed Studio XIAO ESP32C3
The Seeed Studio XIAO ESP32C3 is a compact microcontroller board built around the ESP32-C3 RISC-V SoC. It features complete Wi-Fi and Bluetooth 5.0/BLE connectivity in the signature XIAO thumb-sized form factor (21 × 17.8 mm), making it well suited for IoT, wearables, and low-power wireless proje...
SparkFun Pro Micro - ESP32-C3
·
Don't be fooled by its miniature size; the SparkFun Pro Micro ESP32-C3 packs a punch. This micro marvel crams the powerful ESP32-C3, a single-core RISC-V powerhouse with 400KB of SRAM, into a compact 1.3in. x 0.7in. board. Clocking in at 160MHz, it's ready to tackle your projects quickly and effi...
ESP32-C3-DevKitM-1 Development Board
ESP32-C3-DevKitM-1 is an entry-level development board based on ESP32-C3-MINI-1, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth LE functions. Most of the I/O pins on the ESP32-C3-MINI-1 module are broken out to the pin headers on both sides of this board for...
ESP32-C3-DevKit-RUST-1 - 4 MB Flash
ESP32-C3-DevKit-RUST-1 is an entry-level RISC V development board equipped with the ESP32-C3-MINI-1, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application ...
ESP32-C3 Mini Development Board
The ESP32-C3 Mini Development Board is an entry-level development board based on ESP32-C3-MINI-1, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth® LE functions. Most of the I/O pins on the ESP32-C3-MINI-1 module are broken out to the pin headers on both sides...
TinyPICO ESP32 Development Board with USB-C
TinyPICO is the world's smallest fully-featured ESP32 development board, packing dual-core 240MHz processing, Wi-Fi, Bluetooth, and 4MB of PSRAM into a package smaller than your thumb. This is the V2 USB-C edition with MicroPython pre-installed and ready to go. Designed by UnexpectedMaker, every...
ESP32S WIFI BLE Board-V1.0
ESP-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. The development board breaks out all the module’s pins to 0....
ESP32-C3-MINI-1-N4 Module (PCB antenna)
The ESP32-C3-MINI-1-N4 is a compact Wi-Fi and Bluetooth Low Energy module from Espressif, built around the ESP32-C3FN4 chip with a 32-bit RISC-V single-core processor running at up to 160 MHz. It includes 4 MB of embedded SPI flash and a PCB antenna, making it a self-contained solution for IoT ap...
Edge101 Industrial ESP32 IoT Controller
·
Built around the ESP32 dual-core processor, the Edge101 is an industrial IoT controller for taking ESP32 and Arduino-based projects beyond the workbench and into real-world automation, monitoring and edge gateway deployments.It combines isolated RS485 with Modbus compatibility, isolated CAN bus, ...
ESP32-C3-WROOM-02-N4 Module (PCB antenna)
ESP32-C3-WROOM-02 is a universal Wi-Fi and low-power Bluetooth LE module. The rich set of peripherals and small size make the two modules an ideal choice for smart homes, industrial automation, health care, consumer electronics, etc. ESP32-C3-WROOM-02-N4 is equipped with ESP32-C3* chip and equipp...
Espressif ESP32 Development Board - Developer Edition
The Espressif ESP32 Development Board breaks out all ESP32 module pins to standard 2.54 mm (0.1 in) headers, with a CP2102 USB-to-serial adapter for programming, boot and reset buttons, and an onboard 3.3 V regulator. It supports development via the Arduino IDE, ESP-IDF (Espressif's official tool...
ESP32-WROVER Burning Testing Mini System development Board for ESP-WROOM-32/ ESP-32S/ ESP32-WROVER
This mini system development board serves as both a burning/programming fixture and a minimum system board for ESP32 modules. It's compatible with ESP-WROOM-32, ESP-32S, and ESP32-WROVER modules, with all I/O ports broken out for full access during development and testing. Use it as a standalone...
Adafruit HUZZAH32 – ESP32 Breakout Board
The Adafruit HUZZAH32 ESP32 Breakout is a compact, breadboard-friendly development board built around the Espressif ESP32 dual-core processor. With WiFi, Bluetooth Classic, and BLE support, 4 MB SPI Flash, and a generous set of GPIO, analog, and communication peripherals, it's a powerful and affo...
SparkFun Thing Plus - ESP32 WROOM (USB-C)
The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management with fuel gauge, and a Qwiic I2C connector for plug-and-play sensor expansion. ...
ESP32-P4 Smart 86 Box – Dual-Core RISC-V, 4" 720p Touch Display
·
ESP32-P4 Smart 86 Box Development Board Power up your innovative IoT projects with the ESP32-P4 Smart 86 Box Development Board, a cutting-edge platform designed to unlock the potential of smart home automation, industrial IoT, and high-end embedded applications. Featuring a potent ESP32-P4 ...
