All Products
Showing 1-20 of 60 products
Dual Phono Connector for pHAT DAC
pHAT DAC
pHAT DAC
Pi-DAC+
GNSS Flex pHAT with DAN-F10N Dual-Band GNSS Module
MPN: GPS-29491
Pi-DAC PRO
GNSS Flex pHAT with u-blox ZED-X20P
MPN: GPS-29887
High Quality Gold Plated XT90 Male Female Bullet Connector
pHAT BEAT
GNSS Flex pHAT with ZED-X20P & IM19 IMU
MPN: GPS-29888
30 Piece 5.5 / 2.1mm to DC Barrel Jack Adapter Kit
Male 40-pin 2x20 HAT Header - Male 40-pin Header
Pirate Radio - Pi Zero W Project Kit
Adafruit DAC7578 Breakout - 8 x Channel 12-bit I2C DAC
MPN: ADA6223
pHAT BEAT
GNSS Flex pHAT with mosaic-G5 P3
MPN: GPS-30384
GNSS Flex pHAT with mosaic-X5 RTK & IM19 IMU
MPN: GPS-29889
HIFI DAC Audio Sound Card Module I2S interface for Raspberry Pi
SparkPNT DAN-F10N GNSS Flex Module
MPN: GPS-29061
The Art of Electronics: The X Chapters - by Horowitz Hill
Dual Phono Connector for pHAT DAC
A dual RCA phono connector designed to pair with the Pimoroni pHAT DAC for Raspberry Pi. Simply place it into the landing pads on the PCB and solder for a clean analogue audio output. Key Features Colour-Coded Channels – Red (right) and white (left) for easy identification Through-Hole Termin...
pHAT DAC
If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio! This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its...
pHAT DAC
If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio! This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its 2x20 pin ...
Pi-DAC+
The IQaudIO Pi-DAC+ audio card for the Raspberry Pi delivers outstanding sonic performance and full-HDaudio capability with build-in hardware volume control. The Pi-DAC+ also includes a high quality audiophile headphone amp. The Pi-DAC+ is a fully compliant Raspberry Pi HAT (A+/B+/2) boar...
GNSS Flex pHAT with DAN-F10N Dual-Band GNSS Module
·
Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex Module for metre-level L1/L5 positioning in a compact, swappable format.The pHAT ...
Pi-DAC PRO
Pi-DAC PRO, a new breed of audiophile DAC for the Raspberry Pi. With Phono (RCA), Heaphone (3.5mm) and support for Balanced / Differential output (for XLR use in Studio, or home studio), complete with PCB spacers and screws The Pi-DAC PRO plugs directly on the Raspberry Pi A+/B+/2/3, there’s n...
GNSS Flex pHAT with u-blox ZED-X20P
·
Bring high-precision GNSS to a Raspberry Pi with this GNSS Flex pHAT and u-blox ZED-X20P receiver module. It is built for centimetre-level positioning in demanding navigation and control projects such as UAVs, guidance systems, auto-steering and high-speed robotics.The pHAT connects to a Raspberr...
High Quality Gold Plated XT90 Male Female Bullet Connector
This is a CE-certified XT90 plug that is mini-sized and takes up less space. The banana plug features a true gold plating and a cross-slot design with a larger contact area that can withstand a constant 40A and peak current of 90A.The plastic case is made of insulating material and adopts hollow...
pHAT BEAT
The pHAT BEAT is a stereo audio add-on for the Raspberry Pi featuring dual I2S DAC/amplifiers, 16 RGB LEDs, and six tactile buttons. It delivers high-quality, amplified digital audio through two channels at up to 3W per speaker. The dual rows of eight APA102 RGB LEDs work beautifully as a VU met...
GNSS Flex pHAT with ZED-X20P & IM19 IMU
·
Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centimetre-level positioning, tilt compensation and dead reckoning in demanding naviga...
30 Piece 5.5 / 2.1mm to DC Barrel Jack Adapter Kit
A comprehensive set of 30 barrel jack plug adapters that convert a standard 5.5mm / 2.1mm DC jack to a wide variety of other tip sizes. Perfect for powering devices that use non-standard barrel connectors from your existing DC power supplies, USB-C to DC cables, or battery packs. Each adapter pl...
Male 40-pin 2x20 HAT Header - Male 40-pin Header
These 40-pin 2x20 male headers can be used on a Pi Zero or a pHAT to break out the pins.You can choose either straight or at a 90° angle.Add one to a Pi Zero for compatibility with HATs (which use a female header).Can be used to solder a Pi Zero and pHAT permanently together.The 90° version is gr...
Pirate Radio - Pi Zero W Project Kit
A complete internet radio project kit based on the Raspberry Pi Zero W. Includes a Pi Zero W, the pHAT BEAT DAC and stereo amplifier, a 5W speaker, and a retro-styled blue acrylic enclosure. Assembly takes approximately 30 minutes and requires soldering. The pHAT BEAT features dual MAX98357A I2S...
Adafruit DAC7578 Breakout - 8 x Channel 12-bit I2C DAC
·
The Adafruit DAC7578 Breakout provides eight independent 12-bit digital-to-analogue converters in a single package, all controllable over I2C. Set precise output voltages on up to eight channels simultaneously, making it ideal for multi-channel voltage control, LED dimming, or sensor calibration....
pHAT BEAT
The ultimate audio add-on for your Pi! pHAT BEAT gives you high-quality, digital, amplified, stereo audio and 16 beautiful little RGB LEDs, in two rows of 8, that are ideal as a VU meter, and 6 buttons to control your audio. We've taken the I2S mono DAC and amplifier that we used on Speaker pH...
GNSS Flex pHAT with mosaic-G5 P3
·
Add survey-grade GNSS positioning to a Raspberry Pi while keeping size, weight and power demands low. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 module, built around Septentrio’s compact mosaic-G5 receiver.The pHAT connects to a Raspberry Pi through the standard 40-pin GP...
GNSS Flex pHAT with mosaic-X5 RTK & IM19 IMU
·
Add survey-grade positioning to a Raspberry Pi with this GNSS Flex pHAT bundle, combining a Flex pHAT carrier, Septentrio mosaic-X5 RTK GNSS receiver and Feyman IM19 IMU. It is designed for high-precision positioning, tilt-aware surveying, industrial robotics and autonomous navigation projects.Th...
HIFI DAC Audio Sound Card Module I2S interface for Raspberry Pi
A high-fidelity DAC expansion board for Raspberry Pi that delivers superior audio quality over the Pi's built-in 3.5mm output. Built around Texas Instruments' PCM5122 DAC chip, this board connects via the I2S interface and supports up to 384kHz sampling with 112dB dynamic range — ideal for buildi...
SparkPNT DAN-F10N GNSS Flex Module
·
Add modular GNSS positioning to a Raspberry Pi or similar single-board computer with this compact SparkPNT GNSS Flex receiver module. It is built around the u-blox DAN-F10N and is designed for reliable metre-level positioning, including challenging urban environments.The module fits the SparkPNT ...
The Art of Electronics: The X Chapters - by Horowitz Hill
Wow did you hear about that new sequel coming out? No, no, not The Matrix 4 – it's The Art of Electronics - X Chapters! More delicious, practical electronic advice from the masters, Paul Horowitz and Winfield Hill. The Art of Electronics: The X Chapters expands on topics introduced in the be...
