All Products
AI Overview
For Google Coral Edge TPU acceleration over USB, the main match is the Google Coral USB Accelerator (Edge TPU coprocessor, USB, Linux-compatible) at $274.30.
Helpful Coral/Raspberry Pi hardware add-ons
- If you need extra clearance for boards using the standard 2x20 (40-pin) GPIO footprint (works with Raspberry Pi / Google Coral / Jetson), consider:
- Tall 2x20 Female GPIO Header (PTH, 0.1in) (2x20, 0.1", tall female) — $4.60
- Extended GPIO Female Header - 2x20 Pin (16mm/7.30mm) (2x20, extended height) — $6.70
- Extended GPIO Female Header - 2x20 Pin (13.5mm/9.80mm) (2x20, extended height) — $6.60
- 2x20pin Tall GPIO Pin Header for Raspberry Pi (2x20, tall female) — $2.80
What did you mean by “coral”?
Showing 1-20 of 60 products
Google Coral USB Accelerator
The Coral USB Accelerator adds an Edge TPU coprocessor to your system. It includes a USB socket you can connect to any Linux-based system to perform accelerated ML inferencing.The on-board Edge TPU is a small ASIC designed by Google that provides high performance ML inferencing with a low power c...
GEOWorld Fossils from All Over the World - 10 Fossils
A collection of 10 authentic fossils from around the world, spanning the Palaeozoic, Jurassic, Cretaceous, and other ancient eras. This educational set includes a magnifying glass for close-up examination and a booklet with detailed information about each specimen. Included Fossils Trilobite Na...
Rugged Robot Coral Reef Mat
·
Take Rugged Robot for a swim. This 120 x 120 cm mat puts the robot on a coral reef populated with reef fish, visible examples of coral bleaching, and a broken ship's mast that links across to the Treasure Island mat. It is the mat to reach for when you want the coding lesson to carry some science...
PiTray Clip Din Rail Mount (Compatible for Raspberry Pi and NVIDIA Jetson Nano)
PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail installation solution suitable for industrial setup, home automation application a...
Tall 2x20 Female GPIO Header (PTH, 0.1in)
·
This tall 2x20 female header is designed to extend the reach of boards using the standard 2x20 GPIO pin footprint, including Raspberry Pi, Google Coral and NVIDIA Jetson boards.It can also be soldered onto Pi HATs that do not already have headers fitted. Check that the HAT or board is only popula...
2x20pin Tall GPIO Pin Header for Raspberry Pi
This 2×20 pin tall female header extends the reach of any board with a standard 40-pin GPIO layout, including the Raspberry Pi, Google Coral, and NVIDIA Jetson. At 16 mm tall with standard 0.1″ (2.54 mm) spacing, it provides significant clearance for stacking boards or fitting into enclosures. C...
Low-Profile ICE Tower Cooling Fan for Raspberry Pi 4B/3B+/3B, Super Heat Dissipation
Low-Profile ICE Tower Cooling Fan For Raspberry Pi 4B/3B+/3B, 5mm Copper Tube, Colorful LED Specifications SUPPORTED PI | Raspberry Pi 4B/3B+/3BPOWER SUPPLY | DC 5V input (can be powered from Raspberry Pi)STRUCTURE | ICE Tower-style, 5mm copper tube super heat dissipationRATED POWER | 0.4W @5V, 0...
Adafruit 2.13 Monochrome E-Ink Bonnet for Raspberry Pi - THINK INK
·
The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...
Addressable Through-Hole 8mm RGB LED with Diffused Lens, WS2811 Driver (10-Pack)
A pack of 10 addressable RGB LEDs in a larger 8 mm through-hole form factor with diffused lenses. Each LED contains an integrated WS2811 driver, allowing you to control the colour of every LED individually using just one microcontroller pin. Chain them together for custom lighting effects. Unlik...
Extended GPIO Female Header - 2x20 Pin (16mm/7.30mm)
This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the board. This is assuming that the board is only pop...
Extended GPIO Female Header - 2x20 Pin (13.5mm/9.80mm)
This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the board. This is assuming that the board is only pop...
SparkFun GPS-RTK Dead Reckoning pHAT for Raspberry Pi
·
The SparkFun GPS-RTK Dead Reckoning pHAT brings high-precision GNSS positioning with automotive dead reckoning to the Raspberry Pi. Built around the u-blox ZED-F9R module, it fuses GNSS measurements with an integrated 3D IMU (accelerometer and gyroscope), wheel ticks, and a vehicle dynamics model...
TrinityPixel WS2812B 5050 RGB LED Strip 5M 30LEDS Waterproof
The TrinityPixel WS2812B is a 5-metre waterproof RGB LED strip featuring 30 individually addressable LEDs per metre (150 total). Each LED can be set to any 24-bit colour (8-bit PWM per red, green, and blue channel), giving you full control over every pixel on the strip. The WS2812B LEDs use a si...
Alphabet LED Filament - Warm White Letter "C"
·
A warm-white LED filament shaped as the letter "C", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
Monochrome 0.91”128x32 I2C OLED Display with Chip Pad
A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables, mini consoles, and space-constrained embedded projects where a small, clear dis...
Alphabet LED Filament - Warm White Letter "J"
·
A warm-white LED filament shaped as the letter "J", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
Alphabet LED Filament - Warm White Letter "N"
·
A warm-white LED filament shaped as the letter "N", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
Alphabet LED Filament - Warm White Letter "O"
·
A warm-white LED filament shaped as the letter "O", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
Alphabet LED Filament - Warm White Letter "T"
·
A warm-white LED filament shaped as the letter "T", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
Alphabet LED Filament - Warm White Letter "Q"
·
A warm-white LED filament shaped as the letter "Q", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
