All Products

SKU: LB-ELM-2002SRWA

A 5×7 LED dot matrix display module (ELM-2002 series) with large 5.0mm diameter emitting dots in super red. Suitable for building large numerical and alphanumerical readout displays. The white dots on a grey surface provide good contrast and readability. Specifications Matrix – 5 × 7 dots Dot...

SKU: DF-DFR0091

A 128 × 64 pixel graphic LCD module based on the ST7920 controller, featuring a blue backlight with white characters. Supports both parallel (8/4-bit) and SPI (3-wire serial) interfaces, with parallel mode set as the default. To switch to SPI mode, move the R9 resistor to the R10 position. The d...

SKU: PR-PIM094

This is the lovely little 16 x 3 character LCD we use on Display-O-Tron.A super-slim alternative to the classic industrial character displays. This model has a transparent display allowing you to add your own back-light if you wish! High-contrast LCD display 3 x 16 characters (3.6mm character hei...

SKU: AF-5409

PIXIE CHROMA is a dual-5x7 character display for Arduino that can be easily chained to create easy-to-use displays as long or tall as you'd like!Each PCB features 70 addressable WS2812-compatible RGB LEDs in two side-by-side 5x7 grids that can display numbers and characters. Each Pixie Chroma ca...

SKU: AF-2156

These 14-segment alphanumeric LED displays can show the full alphabet, numbers, and select symbols in a bright pure green hue. With a 0.54" digit height and 14 mcd brightness, they're readable from up to 7 metres (23 feet) away — perfect for clocks, counters, status readouts, and scrolling text p...

SKU: AF-499

This 20×4 character LCD features black text on a full-colour RGB backlight that you can set to any colour — red, green, blue, purple, teal, white, and everything in between. It's the most daylight-readable character LCD available and looks strikingly good at any colour or brightness level. A dro...

SKU: PR-PIM146

The Display-O-Tron Breakout pairs a high-contrast 16 × 3 character LCD with an RGB backlight on a compact breakout board. It runs from either 3.3 V or 5 V and supports SPI, 4-bit, and 8-bit interfaces via the ST7036 controller — making it compatible with Raspberry Pi, Arduino, and most other micr...

SKU: DF-DFR0515

The FireBeetle OSD Character Overlay Module adds on-screen character display to composite video (AV) signals. Based on the AT7456E OSD chip, it overlays up to 16×30 characters onto NTSC or PAL video feeds — ideal for adding timestamps, telemetry data, or status information to camera and monitorin...

SKU: AF-716

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and keypad inputs, leaving your remaining pins free for sensors and other peripherals...

SKU: PL-773

A compact 16×2 character LCD module using the standard HD44780 parallel interface. This display packs 32 characters into an outline smaller than most two-line displays, making it a space-efficient choice for projects with limited panel area. This unit operates without a backlight, keeping power ...

SKU: AF-292

LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons of colors and sizes. We've written tutorials on using character LCDs with an Ard...

SKU: PL-1219

This white-on-blue 20×4 character LCD adds a clear, easy-to-read display to your electronics projects. With four rows of 20 characters, it provides plenty of space for sensor readings, menus, status messages, and more. The display uses the industry-standard HD44780 parallel interface, making it ...

SKU: AF-1365

A simple acrylic stand that holds a 16×2 character LCD upright on your desk. Made from 3 mm black acrylic with nylon mounting hardware, it assembles quickly and gives your display a clean, professional look. Designed specifically for 16×2 USB/Serial backpack LCDs. Other 16×2 displays (OLED or RG...

SKU: AF-715

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connection would require, while still allowing other I²C devices to share the bus. The ...

SKU: AF-398

A 16 × 2 character LCD with a full RGB backlight, displaying black text on a customisable colour background. Set the backlight to any colour — red, green, blue, purple, teal, white, or anything in between — by controlling three independent LED channels. With excellent daylight readability and vib...

SKU: SF-COM-11405

This 20mm 4-digit 7-segment display in red is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one decimal point per digit. Key Features 4-Digit 7-Segment – With decimal point p...

SKU: SF-COM-11408

This 20mm 4-digit 7-segment display in blue is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one decimal point per digit. Key Features 4-Digit 7-Segment – With decimal point ...

SKU: SF-COM-11409

This 20mm 4-digit 7-segment display in white is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one decimal point per digit. Key Features 4-Digit 7-Segment – With decimal point...

SKU: AF-3089

The Adafruit 14-Segment Alphanumeric LED FeatherWing adds a bright 4-digit alphanumeric display to any Feather board. The 0.56" 14-segment LEDs can display the full alphabet, numbers, and punctuation — readable from up to 7 metres away. An onboard HT16K33 matrix driver handles all the LED multip...

SKU: PR-PIM179

The Pimoroni Display-O-Tron HAT packs a 16×3 character LCD display, six-zone RGB backlight, bar graph LEDs, and six capacitive touch buttons into one slim HAT for Raspberry Pi. It's ideal for internet radio, home automation dashboards, and any project that needs a compact display with input contr...