All Products
Showing 1-20 of 60 products
Beetle - The Smallest Arduino Microcontroller
The Beetle is one of the smallest Arduino Leonardo-compatible boards available, built around the ATmega32U4 microcontroller running at 16MHz. Despite its tiny size, it delivers the full functionality of an Arduino Leonardo with 10 digital pins, 5 analogue pins, and 4 PWM outputs. With a built-in...
Beetle CM-32U4 - Compatible with Arduino Leonardo - ATmega32U4
Beetle CM-32U4 is a micro Leonardo controller with an onboard charging chip. As an upgraded version of the DFRobot Beetle Board, this board is greatly optimized in integration and usability, which makes it well applicable to Arduino projects that require compact size and long service life.Ju...
Beetle BLE - The smallest Arduino bluetooth 4.0 (BLE)
Bluno Beetle - The smallest Arduino Board is another milestone in wearable electronics device area based arduino uno, which makes DIY users have more options in the project design. It is fully compatible with Bluno in instructions and procedures, supporting Bluetooth HID and ibeacon modes.&nbs...
Beetle RP2350 Mini Dual-Core Development Board (ARM Cortex-M33 / RISC-V)
·
The Beetle RP2350 is a coin-sized development board built around the Raspberry Pi RP2350 microcontroller with a unique dual-core, dual-architecture design. Choose between ARM Cortex-M33 or Hazard3 RISC-V cores running at 150 MHz, with 520 KB of RAM and 2 MB of flash — delivering serious processin...
Beetle ESP32 Microcontroller
Is FireBeetle-ESP32 too big for your projects? Why not try our newly launched Beetle-ESP32. This Beetle-ESP32 Microcontroller of 1.38”×1.34”small size is a simplified version of FireBeetle-ESP32 and specially designed for electronic engineering fans and DIY lovers. It is equipped with 4 analog po...
Beetle ESP32 - C3 (RISC-V Core Development Board)
The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery charging management on-board — connect a Li-ion battery directly without extra charging...
Beetle ESP32 C6 Mini Development Board for Wireless Smart Wearable Device
Introducing the Beetle ESP32 C6 Mini Development Board - the perfect solution for your wireless smart wearable device needs. This compact Arduino board is based on the powerful ESP32-C6 chip and boasts a sleek design with dimensions as small as a coin (25*20.5mm). With its high-performance 160MHz...
Insectbot Hexa -An Arduino Based Walking Robot Kit For Kids
The Insectbot Hexa is a six-legged walking robot kit based on the Beetle BLE (Arduino-compatible with Bluetooth 4.0). Designed for kids and beginners, this DIY kit teaches soldering, assembly, and basic programming through a hands-on robotics project. Powered by three 9 g micro servos and four A...
Pro Micro - 3.3V/8MHz
Here at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-...
Pro Micro - 5V/16MHz
Here at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-...
Beetle RP2040 Mini Development Board
Designed by Raspberry Pi, RP2040 features a dual-core ARM Cortex-M0+ processor with up to 133MHz clock and 264KB internal RAM, and supports USB 1.1 devices, which allows users to focus on function implementation instead of spending too much time and effort on improving codes. DFRobot Beetle RP20...
eClip - programming Fixture
INTRODUCTION eClip is an innovative programming/testing tool specially designed for Makers. It solves the problem of prototyping wearable projects with ICSP and FTDI interfaces in limited spaces. It provides 2x4 pogo-pins function-board, which makes it much easier ...
Nicla Voice
The 22.86 x 22.86mm Nicla Voice allows for easy implementation of always-on speech recognition on the edge, because it integrates Syntiant’s powerful NDP120 Neural Decision processor to run multiple AI algorithms, leveraging bio-inspired, advanced machine learning to automate complex tasks. Ni...
Gravity: Vibration Motor Module For Arduino
Have you ever wondered how to implement a vibration motor in your project, like you would find in a mobile phone? The latest vibration module in the DFRobot "Gravity" series will give you in-depth understanding of the principles of vibration motors. This module uses a high quality vibration motor...
Arduino Micro
The Arduino Micro is the smallest board in the Arduino family, based on the ATmega32U4 with built-in USB. Its compact breadboard-friendly form factor makes it easy to integrate into everyday objects and interactive projects. Like the Leonardo, it can emulate a keyboard, mouse, or other USB HID de...
TinyPICO V3 USB-C with u.FL by Unexpected Maker
TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb! Please note: This is the u.FL version of the TinyPICO USB-C. Click here for the PCB antenna vers...
Little Bird Finch Board ATTiny85 x 5
Bulk pack of 5The Little Bird Finch is our smallest programmable board. The Finch is a tiny little board designed to add flashy functionality to your project without taking up a lot of room. It has an ATtiny microcontroller on it so it’s actually pretty smart! You can sew on 4 LE...
Little Bird Finch Board ATTiny85
The Little Bird Finch is our smallest programmable board for e-textiles. Australian made, and a great alternative to the Lilypad / Lilytiny, the Finch is designed to add flashy functionality to your e-textiles or cosplay project without taking up a lot of room. It has an ATtiny85 microcontroller ...
ATMEGA2560-16AUR AVR 8-bit Microcontroller
·
The ATMEGA2560-16AUR is a high-performance, low-power 8-bit microcontroller based on the Microchip AVR enhanced RISC architecture. It is the controller IC used at the heart of the Arduino Mega and many other advanced controller boards, making it a strong choice for complex embedded projects that ...
BeetleC (W/O M5StickC)
Description Ever wanted to build your robotic car with tiny body and smooth control? Here comes the BeatleC, features a dual-driver and 7 RGB LEDs, extreme concise design and together with M5StickC (features ESP32-Based Wi-Fi control), makes it the handiest and full-function small robotic car ...
