All Products
Showing 1-20 of 100 products
Bare Conductive Touch Board
The Touch Board from Bare Conductive is an easy-to-use Arduino@Heart board that gives you the ability to turn almost any material or surface into a sensor. Each Touch Board offers 12 electrodes for your a conductive ink or other type of connector that can be drawn or attached to create light s...
TF Mini LiDAR(ToF) Laser Range Sensor
The TF Mini LiDAR is an unidirectional laser range finder based upon time-of-flight (ToF) technology. It consists of special optical and electronic devices, which integrates adaptive algorithm for indoor and outdoor application environment. It has tiny body and high performance in...
2.8 TFT Display with Resistive Touchscreen
·
The 2.8" TFT Display with Resistive Touchscreen is a bare LCD module featuring 320×240 resolution with individual RGB pixel control. Driven by the ILI9341 chipset, it supports SPI (3- or 4-wire), 8-bit parallel, and 16-bit parallel interfaces. The resistive touchscreen is an analogue type that r...
The XL741 Discrete Op-Amp Kit
Build a working transistor-scale replica of the classic and ubiquitous analog workhorse. The "XL741" Discrete Operational Amplifier kit from Evil Mad Scientist Laboratories is a faithful and functional transistor-scale replica of the μA741 op-amp integrated circuit, the classic and ubiquitous ana...
3.2 TFT Display with Resistive Touchscreen
·
A 3.2" TFT LCD display module with a built-in resistive touchscreen. The 320×240 pixel screen is driven by the ILI9341 chipset and supports SPI, 8-bit parallel, and 16-bit parallel interfaces. This is the bare display module only — no PCB or breakout board is included. A 50-pin, 0.5 mm pitch, to...
2.8 TFT Display - 240x320 with Capacitive Touchscreen
·
The 2.8" TFT Display is a bare LCD module with a capacitive single-touch touchscreen. Featuring 240×320 resolution with individual RGB pixel control and a bright 4-LED backlight, it delivers vivid full-colour output for custom projects. The display is driven by the ILI9341 chipset and the touchs...
Bearables Bear LED Badge
The Bearables Bear LED Badge is a wearable, sewable badge featuring 12 coloured LEDs and 12 built-in light patterns. Press the multi-function button to cycle through patterns, put the badge to sleep, or activate trigger mode for use with Bearables analog sensors connected via conductive thread. ...
Bearables Bear Kit
A complete Bearables Bear Kit with coloured LED badge, motion sensor, thread, needles, and battery. Sewable, hackable, wearable, adorable! Bearables is a range of woodland-themed wearable LED badges and sensors. Wear the badges on their own, or connect them to one of the sensors with conduc...
Bearables Fox Kit
A complete Bearables Fox Kit with coloured LED badge, light sensor, thread, needles, and battery. Sewable, hackable, wearable, adorable! Bearables is a range of woodland-themed wearable LED badges and sensors. Wear the badges on their own, or connect them to one of the sensors with conducti...
11.6 Inch 1920x1080 FHD eDP Touch Display for LattePanda Mu / Sigma / 3 Delta / 2 Alpha
·
An 11.6-inch 1920×1080 IPS touch display that connects directly to LattePanda single-board computers via eDP (Embedded DisplayPort). The ultra-thin, narrow-bezel design and multi-touch input make it well suited for portable projects, kiosks, and human-machine interface (HMI) applications. The eD...
ESP-WROOM-32 (ESP32 WiFi-BT-BLE MCU Module)
The ESP-WROOM-32 is Espressif's powerful Wi-Fi, Bluetooth Classic, and BLE module built around the ESP32 dual-core processor. It's a versatile platform for IoT applications ranging from low-power sensor networks to demanding tasks like voice encoding, music streaming, and MP3 decoding. This is t...
3.2 inch 320x820 RGB TTL TFT Display - No Touch
·
This rectangular TFT module is for projects that can drive a high-pixel-count RGB TTL display directly. It provides 320x820 pixels with RGB666 16-bit full-colour output on an IPS panel, so colours stay clear at wide viewing angles.It uses an ST7701S TFT driver. SPI is used only to configure the d...
Glowing House Set - BARE Conductive
IntroductionBare Paint is the first non-toxic electrically conductive paint available to consumers today! This unique child-friendly material is designed for people of all ages to explore and learn about electronics with an inclusive, easy-to-use material.Bare's House Kit contains all the compone...
Bare Conductive Paint Pen (10ml)
Bare Conductive Electric Paint is a water-based conductive paint in a convenient pen format. Draw circuits, cold solder components, repair PCBs, or use it as a conductive adhesive on paper, plastic, textiles, wood, glass, and more. The paint becomes conductive when fully dry. Compatible with Ard...
Raspberry Pi Zero W
·
The Raspberry Pi Zero W is the wireless version of the ultra-compact Raspberry Pi Zero, adding built-in WiFi (802.11 b/g/n) and Bluetooth 4.1 (with BLE) via a BCM43143 chip. It retains the same tiny form factor and low price point as the Pi Zero v1.3, making it an excellent choice for IoT project...
SparkFun RS232 Shifter SMD (No DB9)
A compact RS232-to-TTL level shifter board that converts both TX and RX lines bidirectionally. Powered from your target application's supply voltage, it automatically converts RS232 signals to match — run it at 5 V for 5 V TTL, or at 2.8 V for 2.8 V CMOS TTL levels. Includes TX and RX indicator L...
Relay Control PCB
A bare PCB for building a relay control circuit, based on SparkFun's Controllable Power Outlet tutorial. It allows you to switch high-voltage loads using a simple 0–5V GPIO signal from any microcontroller. Components must be sourced and soldered separately. Key Features Bare PCB – Solder your ...
Micro Dot pHAT - pHAT only
The Micro Dot pHAT is a retro-style LED matrix display board for Raspberry Pi, designed to drive up to six Lite-On LTP-305 LED matrices. Each 5×7 pixel matrix includes a decimal point, giving you an effective display area of 30×7 pixels across all six modules. Use between 1 and 6 matrices in you...
OnOff SHIM
Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted components) and designed to be soldered straight on...
OnOff SHIM
Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted components) and designed to be soldered straight onto ...
