All Products

SKU: AF-1679

A compact bent-wire stand designed for tablets up to 7 inches and small TFT displays. The rubberised grip holds devices securely at an adjustable viewing angle, and the stand collapses flat for easy storage or travel. Originally designed for 7-inch tablets, it also works well with 5–10 inch TFT ...

SKU: DF-FIT0561

An all-metal adjustable screen holder that lets you tilt displays on your desktop at your preferred viewing angle. The rotating screws provide stable elastic reinforcement, and the holder folds flat when not in use. Recommended for 7-inch and larger panels or screens. Key Features Adjustable T...

SKU: EC-RPA00273R

This handy Three Wire Display Stand is made for Raspberry Pi, but also can adapt to other tablet PC, such as iPad. It is great for general electronics & TFT holding. You can adjust the angle as you like. Features Fully adjustable Vinyl Coated Steel Wire that will not scratch furniture or disp...

SKU: AF-4377

Here is an updated, excellently designed stand that provides a sleek and sturdy look for the 7" Touchscreen Display and Raspberry Pi. Say hello to the improved SmartiPi Touch 2 which has a ton of new goodies like Pi 4 compatibility, various front-pieces for adding LEGO brick compatibility, and...

SKU: SF-PRT-19259

The Mates Stand offers a simple connection for a MatesBUS compatible device, such as the TIMI-96. It eases development by propping the MatesBus compatible device up on an angle (35 degrees off vertical), aiding development when standing on a desk or bench.The Mates Stand breaks out the ten signal...

SKU: PR-PIM121

A protective display frame for the official 7" Raspberry Pi Touchscreen. Three layered acrylic pieces mount to the back of the screen, while two legs hold it at a comfortable viewing angle. No tools required — assembly uses the supplied bolt pack. Key Features 3-Layer Design – Supports and pro...

SKU: PI-SMALL-002

A beautiful desktop stand for your tablet based on the living hinge!  A "Living Hinge" is an evolution of a traditional hinge that exists solely through the use of laser cutters By carefully removing material from a rigid sheet of Medite we have built a flexible and compressible structure th...

SKU: SF-PRT-26988 · MPN: PRT-26988

This is a short piece of spring steel music wire that can be bent to the shape you need for small mechanisms, linkages, prototypes or craft builds.Each unit is supplied as an individual 6 inch length with a fine 0.025 inch outer diameter, making it useful where a slim, resilient steel wire is req...

SKU: AF-2299

Make a lovely video setup with a 7" screen at 1024x600 resolution. For this model, we tried to get an inexpensive 1024x600 display that was still high quality and would be good for embedded computing usage. The visible display measures 7" diagonal and is a 'raw TTL' display. We include a drive...

SKU: RP-SC0940 · MPN: SC0940

The official Raspberry Pi Monitor is a 15.6" Full HD (1080p) IPS display with an anti-glare coating, designed to pair with your Raspberry Pi. It's powered directly via USB-C from the Pi or an external supply, with a standard HDMI input for video. Integrated front-facing speakers and a 3.5 mm audi...

SKU: AF-2301

Yes, this is a 7" TFT display with 1024x600 resolution with audio-over-HDMI capability! We tried to get the best medium-size display that would be good for embedded computing usage and at a good price.  We include a driver board with HDMI, VGA and Composite inputs as stereo 4 ohm at ...

SKU: EC-DIS10411D

You can use your tablets as a second or third display with this side mount clip, this clip can clamp your tablet or cell phone to your laptop to extend your screen and get multi-display experience. It is a must-have for those who need multitasking at home, office or on the go to increase your pro...

SKU: SF-PRT-00124

This is a time saving kit of jumper wires - cut, stripped, and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, and 125mm - 10 pieces of each.

SKU: LB-LS0299

This multifunctional third hand soldering stand combines adjustable crocodile clip clamps, LED lighting, and a dual magnifying lens to keep your hands free while soldering, assembling, or inspecting small components. The weighted base with a steel plate provides extra stability, and it can be po...

SKU: AF-4103

A simple, solder-free way to make secure wire connections to development boards with large alligator-clip pads. Thread a screw through the pad, wrap your wire around it, and tighten the hex nut to hold everything firmly in place — no soldering or bulky alligator clips required. Compatible Boards...

SKU: DF-FIT0122

This is a time saving kit of jumper wires - cut, stripped,bent 90 degree on both ends for easy insertion and your prototyping pleasure.Make your prototyping neat and looks nicer, The box included with this kit are 14 various lengths of 22AWG wire - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, ...

SKU: EC-DPM50080D

This 7" IPS touchscreen monitor is designed for Raspberry Pi with a built-in speaker, stand, and all necessary cables included in the box. Mount your Raspberry Pi directly on the back of the display using the included acrylic board and copper standoffs for a compact, portable setup. The capaciti...

SKU: AF-2300

Yes, this is a 7" TFT display with 1024x600 resolution and a cute little driver board. We tried to get the best medium-size display that would be good for embedded computing usage and at a good price. And we also tried to match it with a small driver board that can be powered from a USB p...

SKU: PK-SN-392

This handy third hand tool helps hold small parts steady while you solder, inspect, glue or assemble detailed projects. It is well suited to electronics work, lab tasks, jewellery making and other precision jobs where an extra pair of hands makes life easier.The heavy iron base keeps the stand st...

SKU: SF-PRT-28007 · MPN: PRT-28007

Add a bit of protection and a cleaner finish to your Alchitry board with this standoff hardware. It is designed for use with compatible Alchitry boards, helping lift the PCB off your work surface or enclosure base.The bolts protrude about 2mm below the board, which is just further than the lowest...