All Products
Showing 1-17 of 17 products
USB Voltage Meter with OLED Display
·
This USB In-Line Voltage and Current Meter with OLED Display is a lot like the Charger Doctor we carry - if the doctor was a talented surgeon who just lost her medical license and has nothing to lose. Just like the charger doctor, you can use this meter to find out if your...
USB to 2.1mm Male Barrel Jack Cable [22AWG 1 meter]
·
This USB to 2.1 mm barrel jack cable lets you power 5 V DC devices from any USB port. Simply connect the USB-A end to a computer, USB wall adapter, or USB battery pack, and the barrel jack end to your device. At 1 metre long with 22 AWG wires, it handles higher current draws reliably. The barrel...
Adafruit PyRuler - Engineer Reference Ruler with CircuitPython
·
The Adafruit PyRuler is a PCB reference ruler and a fully functional CircuitPython microcontroller in one. Measuring approximately 25 × 150 mm (1" × 6"), this gold-plated FR4 ruler features common SMD component package outlines, a font size guide, trace-width diagram, and AWG wire gauge drill hol...
Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT
·
The Adafruit ESP32-S2 Feather with BME280 is identical to the standard ESP32-S2 Feather but with an on-board BME280 temperature, humidity, and barometric pressure sensor at I2C address 0x77. This makes it an instant IoT environmental monitor — just add Wi-Fi credentials and start logging. Built ...
Adafruit ESP32-S2 Feather - 2 MB PSRAM and STEMMA QT / Qwiic
·
The Adafruit ESP32-S2 Feather brings Espressif's single-core ESP32-S2 to the Feather ecosystem with native USB, 2.4 GHz Wi-Fi, 4 MB flash, and 2 MB PSRAM. Native USB support means it can act as a keyboard, mouse, MIDI device, or disk drive — no separate USB-to-serial chip needed. This version in...
Adafruit ESP32-S2 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT
·
The Adafruit ESP32-S2 TFT Feather features a built-in 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the front of the board. Combined with the ESP32-S2's native USB, 2.4 GHz Wi-Fi, 4 MB flash, and 2 MB PSRAM, it provides a complete visual IoT platform in the Feather form factor. The co...
Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic
·
The Adafruit ESP32-S3 Feather with STEMMA QT brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. This version comes with 8 MB flash, 512 KB SRAM, and no PSRAM — suitable for ESP-IDF, Arduino, and lighter CircuitPython projects that don't require large ...
Adafruit ESP32-S3 Feather with 4MB Flash 2MB PSRAM
·
The Adafruit ESP32-S3 Feather with 4 MB Flash and 2 MB PSRAM brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. The 2 MB PSRAM provides extra memory for large data buffers, making it well-suited for CircuitPython or projects that need fast SRAM access...
Adafruit ESP32-S2 Reverse TFT Feather
The Adafruit ESP32-S2 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an enclosure. Three user buttons (D0, D1, D2) alongside the display provide a comple...
Adafruit ESP32-S3 Reverse TFT Feather
The Adafruit ESP32-S3 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an enclosure. Three user buttons (D0, D1, D2) alongside the display provide a comple...
Adafruit ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT
·
The Adafruit ESP32-S3 TFT Feather features a built-in 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the front of the board. Combined with the dual-core ESP32-S3's native USB, Wi-Fi, Bluetooth LE, 4 MB flash, and 2 MB PSRAM, it provides a complete visual IoT platform in the Feather form...
Adafruit ESP32-S3 Feather 8MB with w.FL Antenna
·
The Adafruit ESP32-S3 Feather with w.FL Antenna features the dual-core ESP32-S3 with Wi-Fi, Bluetooth LE, and native USB in the Feather form factor, plus a w.FL (MHF3/IPEX3) connector for attaching an external 2.4 GHz antenna. This makes it ideal for enclosed installations or when you need improv...
Thing Plus RP2350 Wireless Development Board
·
Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...
Adafruit Metro ESP32-S3 with 16 MB Flash 8 MB PSRAM
The Adafruit Metro ESP32-S3 brings the powerful dual-core ESP32-S3 to the familiar Metro/UNO shield-compatible form factor. With 16 MB flash, 8 MB PSRAM, and 512 KB SRAM, this board has the memory to handle demanding CircuitPython, Arduino, or ESP-IDF projects with WiFi and Bluetooth LE connectiv...
USB A to microB cable - Red - 1m
A 1-metre USB-A to Micro-B cable in matte red with a TPE cable shroud for durability and flexibility. Featuring 22 AWG power lines for low voltage drop, it's well suited for both data transfer and powering devices like Arduino boards, Raspberry Pi, and other microcontroller platforms. Key Featur...
Panel Mount USB Cable - USB A Plug to USB A Right Angle Socket
·
This panel-mount USB extension cable runs a USB Type-A port through an enclosure wall. The socket end has two flexible mounting ears with pre-installed M3 screws for securing to a panel, while the plug end connects to a USB host device inside the enclosure — ideal for Raspberry Pi, BeagleBone, or...
Adafruit ESP32-C6 Feather - STEMMA QT
·
The Adafruit ESP32-C6 Feather is built around Espressif's first Wi-Fi 6 SoC, combining 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 (Zigbee/Thread) in a single chip. The addition of 802.15.4 support makes it well-suited for Matter development and smart home applications. This Feather includes...