All Products

SKU: AF-1501

The Adafruit Trinket 5V is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a single build. Program it via the Arduino IDE over the Micro-USB connector — no separat...

SKU: AF-1787

A quad level-shifting buffer IC that excels at converting 3V logic signals up to 5V. Power the 74AHCT125 with 5V and it will cleanly detect 3.3V logic inputs — particularly useful when connecting devices like Teensy 3.x to NeoPixels or other 5V peripherals. To use, apply 5V to VCC, connect GND, ...

SKU: AF-3877

A hex Schmitt-trigger inverter IC that doubles as a handy logic level shifter. The 74AHCT14 provides six independent inverter channels, each with Schmitt-trigger inputs for clean switching on noisy or slow-transitioning signals. Spec'd for 5V operation but works at 3V as well. High-level inputs ...

SKU: AF-3500

The Adafruit Trinket M0 is a tiny but powerful microcontroller board built around the ATSAMD21E18 32-bit Cortex M0+ processor. It shares the same compact form factor and pinout as the original Trinket, but with a massive upgrade in processing power, memory, and connectivity — including native USB...

SKU: AF-2000

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 5V is a compact ATmega328P-based mic...

SKU: AF-5346

The Adafruit MCP23017 I2C GPIO Expander Breakout adds 16 extra GPIO pins to any microcontroller or microcomputer over I2C. Each pin can be configured as a digital output (driving up to 25 mA — perfect for LEDs) or as an input with optional internal pull-up resistors. With three configurable addr...

SKU: AF-5636

The Adafruit SPI FLASH Breakout features a W25Q64 chip providing 64 Mbit (8 MByte) of non-volatile flash storage over a standard SPI interface. It's ideal for adding compact, low-power external storage to microcontroller projects — perfect for files, images, fonts, and audio clips when a full SD ...

SKU: AF-4718

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: AF-2590

The Adafruit Metro Mini 328 packs the same ATmega328P power as a full-sized Metro into a tiny breadboard-friendly form factor. Running at 16 MHz with 5V logic, it's pin-compatible with Arduino UNO R3 and works with the Arduino IDE by selecting "Arduino UNO" in the Boards menu. For the latest revi...

SKU: FT-LEVEL

Many of the most interesting sensors and devices are only available in 3.3V or even lower voltage versions, which can be a problem if you want to connect them to a 5V microcontroller such as an Arduino. This module easily connects different logic voltage levels together for bi-directional comm...

SKU: AF-1897

The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times with...

SKU: AF-5879 · MPN: ADA5879

The Adafruit UPDI Friend is a compact USB serial programmer for ATtiny microcontrollers that use the UPDI (Unified Program and Debug Interface) protocol. Built around the CH340E USB serial converter with USB Type-C, it provides reliable cross-platform programming with switchable 3V or 5V power an...

SKU: AF-6058 · MPN: ADA6058

Add programmable colour to patios, balconies, displays and outdoor-style decorations with this bulb strand fitted with NeoPixel RGB LEDs. Each strand has 20 cafe-style bulbs, and each bulb is individually addressable so you can create rainbows, chases, fades and other effects using a NeoPixel/WS2...

SKU: DF-DFR1026

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity indication and button-controlled output. The module comes with a built-in power ma...

SKU: AF-2488

The Adafruit METRO 328 is a fully assembled, Arduino UNO R3-compatible development board powered by the ATmega328P running at 16 MHz. It's shape and pin-compatible with Arduino UNO R3 shields, and works directly with the Arduino IDE by selecting "Arduino UNO" in the Boards menu. This version come...

SKU: AF-4464

The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometers and ±2000°/s gyros aren't enough, this sensor delivers the extended measuremen...

SKU: AF-2776

This miniature push-pull solenoid features a captive armature with a return spring — when energised at ~5 V DC, the armature retracts, and when power is removed it springs back to its original position. The dual-action design lets you use it as either a push or pull mechanism, and the built-in mo...

SKU: AF-5708

The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. This is a transceiver only — it does not include a CAN controller, so your microco...

SKU: AF-6066 · MPN: ADA6066

The Adafruit Pixel Shifter is a simple inline level-shifting board for addressable LEDs like NeoPixels (WS2812, SK6812) and similar one-wire-control pixels. It solves the common problem of 3.3V microcontrollers not being able to reliably drive 5V LED strips — no more flickering or strange colour ...

SKU: AF-6258 · MPN: ADA6258

The Adafruit DAC6578 Breakout provides eight independent 10-bit digital-to-analogue converters in a single package, all controllable over I2C. Set precise output voltages on up to eight channels simultaneously, making it ideal for multi-channel voltage control, LED dimming, or sensor calibration....