All Products

SKU: DF-DFR1140

FireBeetle 2 ESP32-UE (N16R2) is a powerful IoT microcontroller that supports external Bluetooth & WiFi antennas and features 16M Flash and 2M PSRAM. This product enhances memory capacity and operating space, enabling superior performance for applications such as the LVGL graphics library for int...

SKU: AF-6475 · MPN: ADA6475

Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status panels and data dashboards with CircuitPython or Arduino.This version uses a u.FL ...

SKU: EC-WAW24031A

A 2.4 GHz WiFi antenna with 3 dBi gain, suitable for DIY wireless projects. It provides improved range over built-in PCB antennas on WiFi-enabled microcontrollers and development boards. Key Features 3.0 ± 0.7 dBi Gain – Improved signal strength over stock antennas 2400–2500 MHz Frequency Ran...

SKU: EC-WWF2232USR

This Serial WiFi module is you best choice for you to connect your application to the internet. It is a complete ultra low power embedded TCP/IP solution. It is a standalone, embedded wireless 802.11b/g networking module. It incorporates a 2.4GHz radio, processor, TCP/IP stack, power management t...

SKU: AF-945

A 200 mm (8″) swivel dipole antenna with 5 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The higher gain compared to the 2 dBi version extends range at the cost of a larger form factor. The swivel joint lets you angle the antenna...

SKU: EC-WAW24040A

A 2.4 GHz WiFi antenna with 4 dBi gain and an IPEX (MHF) connector, enclosed in a protective cover. It connects directly to boards with an IPEX/U.FL socket, providing improved wireless range over built-in PCB antennas. Key Features 4 dBi Gain – Higher gain than standard stub antennas for exten...

SKU: AF-2680

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, ...

SKU: AF-4172

The Adafruit HUZZAH32 ESP32 Breakout is a compact, breadboard-friendly development board built around the Espressif ESP32 dual-core processor. With WiFi, Bluetooth Classic, and BLE support, 4 MB SPI Flash, and a generous set of GPIO, analog, and communication peripherals, it's a powerful and affo...

SKU: WS-25452

A compact ESP32-C3 development board based on the ESP32-C3FN4 single-core RISC-V processor running at up to 160 MHz. With 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth 5 (LE), 4 MB onboard flash, and a castellated module design, it's ideal for both breadboard prototyping and direct SMD soldering to c...

SKU: AF-2471

The Adafruit HUZZAH ESP8266 Breakout is a breadboard-friendly WiFi microcontroller board built around the Espressif ESP8266. With an 80 MHz processor, full WiFi client and access point support, a built-in TCP/IP stack with DNS, and a CE/FCC certified module with on-board antenna, it provides an a...

SKU: AF-944

A 100 mm (4″) swivel dipole antenna with 2 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The swivel joint lets you angle the antenna for optimal signal direction. Key Features 2 dBi Gain – Omni-directional coverage for short-t...

SKU: AF-2308

A 100 mm (4″) flexible WiFi antenna with approximately 4 dBi gain and a U.FL (IPEX) connector. The flexible design lets you bend and position the antenna to suit your enclosure or project layout, while the U.FL connector snaps directly onto boards without the need for an adapter. Key Features ...

SKU: SF-GPS-28962 · MPN: GPS-28962

This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. The standard 2x10 male headers accept a GNSS Flex module and expose its available ...

SKU: AF-3591

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-3405

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-5445

That's one slim cellular antenna! At about 220mm long from tip to tip and with a cable thickness of just 0.8mm, this 2.4GHz WiFi or BLE antenna is slim, compact, and sensitive, with a 4dBi gain. The antenna is the trace on the PCB that is at the end of the skinny coaxial cable. It has an adhesive...

SKU: AF-3046

Feather is the flagship development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Assembled Adafruit Feather HUZZAH ESP8266 with headers - our take on an 'all-in-one'...

SKU: AF-3176

The Feather M0 RFM69HCW Packet Radio (868/915 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 868 or 915 MHz. The exact radio frequency is software-configurable, allowing you to tune dynamically for your reg...

SKU: AF-3213

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi developme...

SKU: SF-WRL-17381 · MPN: WRL-17381

Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you attach a suitable external antenna for installations where a PCB antenna is not...