All Products

SKU: EL-3106156

A compact Bluetooth keyboard with a mounting bracket designed for the Raspberry Pi 4 Touchscreen Case. The bracket screws into the fixing points on the bottom of the touchscreen case, creating a neat, portable workstation for your Raspberry Pi. With built-in rechargeable lithium battery and mult...

SKU: PI-KEY0103

Lightweight and portable, this Bluetooth keyboard is the perfect companion to your Raspberry Pi, tablet or PC! Featuring a compact yet comfortable keypad and a 2-button trackpad this keyboard will easily pair with your Raspberry Pi 3 or other Bluetooth enabled device. Speci...

SKU: AF-3601

Sure, you have a keyboard. Maybe it's wireless. Maybe it's even Bluetooth. But do you have a mini Bluetooth keyboard? Like Halloween candy, this keyboard is fun-size! If Shakespeare had this wee chiclet keyboard back in the day, he definitely would've remarked, "And though it be...

SKU: LB-LS7688

Folding Bluetooth Keyboard: Enjoy true portability with an ultra-slim, foldable keyboard that fits easily into a pocket or bag. Ideal for travel and business trips, with an integrated touchpad and support for iOS version 13.3 and above.Long Standby & Auto Wake: Features a built-in rechargeable ba...

SKU: AF-5500

The Adafruit Metro ESP32-S3 brings the powerful dual-core ESP32-S3 to the familiar Metro/UNO shield-compatible form factor. With 16 MB flash, 8 MB PSRAM, and 512 KB SRAM, this board has the memory to handle demanding CircuitPython, Arduino, or ESP-IDF projects with WiFi and Bluetooth LE connectiv...

SKU: AF-2633

The Adafruit Bluefruit LE SPI Friend adds Bluetooth Low Energy connectivity to any microcontroller with just 4–5 GPIO pins. Using SPI instead of UART means no baud rate configuration or flow control to worry about — connect via MISO, MOSI, SCK, CS, and an interrupt pin, and you're ready to go. T...

SKU: AF-2479

The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during transmission. Connect via UART TX/RX pins, or use a standard FTDI cable for debu...

SKU: AF-4062

The Feather nRF52840 Express upgrades the nRF52 Bluefruit with the Nordic nRF52840 — featuring 1 MB flash, 256 KB SRAM, native USB, and Bluetooth Low Energy in a single chip. Native USB means no separate serial converter is needed; the chip handles CDC serial, and can also act as a HID keyboard, ...

SKU: AF-5700

The Adafruit QT Py ESP32-S3 with 2 MB PSRAM is the memory-upgraded version of the QT Py ESP32-S3. With 4 MB flash, 512 KB SRAM, and 2 MB PSRAM, it can handle large data buffers — perfect for image processing, large JSON parsing, or memory-intensive CircuitPython projects that the standard version...

SKU: AF-2746

The Adafruit Bluefruit LE Shield adds Bluetooth Low Energy connectivity to your Arduino in a plug-in shield form factor. Solder the included headers, stack it on your Arduino, and start communicating wirelessly with iOS and Android devices — no special iOS certification required. The shield conn...

SKU: AF-2995

The Feather M0 Bluefruit LE combines an ATSAMD21G18 ARM Cortex M0 processor with a Bluetooth Low Energy module, native USB, and LiPo battery charging. With the power of a 48 MHz ARM core and 256KB of flash, it provides significantly more processing headroom than the 32u4-based Bluefruit while mai...

SKU: AF-3242

The Feather 32u4 Bluefruit LE with Stacking Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with stacking headers pre-soldered so you can plug into a breadboard and stack FeatherWings on top. The Bluefruit module is...

SKU: DF-DFR0296

The Bluno Nano combines an Arduino Nano-compatible ATmega328 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module in a compact 53 × 19 mm form factor. It enables wireless communication, wireless programming, and Bluetooth HID functionality — ideal for BLE-enabled wearables and ...

SKU: SF-WIG-14271

With Single-Board Computers (SBCs) on the rise, it is a good idea to have an easy way to interface with them. Operating on a 2.4GHz frequency, the Multimedia Wireless Keyboard possesses a normal-sized key layout, media controls and a multitouch track pad. This keyboard is powered by a built-in 85...

SKU: AF-3379

The Feather 32u4 Bluefruit LE with Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with standard headers pre-soldered so you can plug straight into a breadboard. The Bluefruit module is built on the Nordic nRF51822 ...

SKU: AF-922

Add a miniature wireless controller to your computer project with this combination keyboard and touchpad. We found the smallest wireless USB keyboard available, a mere 6" x 2.4" x 0.5" (152mm x 59mm x 12.5mm)! It's small but usable to make a great accompaniment to a computer such as the Beagle...

SKU: AF-2829

The Feather 32u4 Bluefruit LE combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging in one compact board. BLE is supported by all modern smartphones and tablets (iOS, Android, Mac OS X, Windows 8+), making it ideal for portable proj...

SKU: AF-3406

The Feather nRF52 Bluefruit LE is an all-in-one Bluetooth Low Energy development board built around the Nordic nRF52832. Unlike earlier Bluefruit Feathers that used a separate helper chip, the nRF52832 runs your application code and handles BLE directly — resulting in lower power consumption, low...

SKU: AF-5477

The Adafruit ESP32-S3 Feather with 4 MB Flash and 2 MB PSRAM brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. The 2 MB PSRAM provides extra memory for large data buffers, making it well-suited for CircuitPython or projects that need fast SRAM access...

SKU: AF-5885 · MPN: ADA5885

The Adafruit ESP32-S3 Feather with w.FL Antenna features the dual-core ESP32-S3 with Wi-Fi, Bluetooth LE, and native USB in the Feather form factor, plus a w.FL (MHF3/IPEX3) connector for attaching an external 2.4 GHz antenna. This makes it ideal for enclosed installations or when you need improv...