All Products

SKU: AF-1762

These breakout PCBs make it easy to use 5050-size SMD LEDs on a solderless breadboard. Solder a 5050 LED to either side of the PCB and the pins drop straight into standard 0.1″ breadboard rows — no adapter wiring needed. Key Features 5050 LED Compatible – Footprint matches standard 5050 SMD LE...

SKU: AF-2350

These APA102 (DotStar) warm white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three warm white (~3000K) dies. The phosphor coating produces a consistent, diffused warm light that looks far better than mixing RGB ...

SKU: AF-2351

These APA102 (DotStar) cool white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three cool white (~6000K) dies. The phosphor coating produces a consistent, diffused white light that looks far better than mixing RGB...

SKU: AF-1655

Individual WS2812B-compatible 5050 RGB LEDs with an integrated driver chip — the same LED used in NeoPixel strips and pixels. Each 5 × 5 mm package contains an RGB LED and controller with ~18 mA constant-current drive, delivering consistent colour regardless of voltage variation. No external resi...

SKU: AF-2343

These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED used in DotStar LED strips, now available as individual components for custom desig...

SKU: KI-2726

Ultra-slim sewable LED boards from Kitronik in sakura lilac, designed for e-textile and wearable electronics projects. Each LED board runs from a 3V coin cell battery and illuminates continuously when powered. The double-sided PCBs feature clearly marked + and – connections for reliable conductiv...

SKU: AF-2760

NeoPixel RGBW LEDs with an integrated driver chip in a compact 5050 SMD package. Each LED contains four elements — red, green, blue, and warm white (~3000 K) — giving you full RGB colour mixing plus a dedicated warm white channel for natural lighting effects. Each LED has an embedded microcontro...

SKU: LB-EAGLED-LED-B

Made here in Sydney these are our very own EagLED LED - Blue in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. These have large sew tabs so that you can put your conductive thread through sev...

SKU: AF-2757

What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixels now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Make your own smart RGBW LED arrangement with the same integrated LED driver that is used in our NeoPixel LED strips. This is the RG...

SKU: AF-4892

These incredibly small and slim surface-mount NeoPixel LEDs are an easy way to add a lot of very tiny (but bright!) colorful baguette diamond LEDs to your project. They are just 3.2mm x 1.0mm x 1.48mm and can be soldered in a few different ways: flat against a PCB, reverse mount using t...

SKU: AF-2759

What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixels now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Make your own smart RGBW LED arrangement with the same integrated LED driver that is used in our NeoPixel LED strips. This is the RGB +...

SKU: AF-2761

What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixels now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Make your own smart RGBW LED arrangement with the same integrated LED driver that is used in our NeoPixel LED strips. This is the RGB +...

SKU: LB-EAGLED-LED-W

The EagLED is a sewable white LED designed and made in Sydney. Each pack contains 10 LEDs connected in a snap-apart strip, so you can break them off as needed for your project. Large sew tabs allow you to loop conductive thread through multiple times for a secure connection to fabric. The thin P...

SKU: AF-5975 · MPN: ADA5975

A compact single-NeoPixel breakout board with mounting holes and pluggable JST SH connectors, perfect for adding individually addressable RGB lighting to small projects. The PCB measures less than 13 × 13 mm and works with both 3.3V and 5V power. Two 3-pin JST SH (1 mm pitch) connectors allow ea...

SKU: AF-2758

What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixels now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Make your own smart RGBW LED arrangement with the same integrated LED driver that is used in our NeoPixel LED strips. This is the RGB +...

SKU: DF-DFR0238

This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lighting to existing or new projects. Controlled by PWM channels can be available i...

SKU: LB-EAGLED-LED-R

Made here in Sydney these are our very own EagLED LED - Red in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. These have large sew tabs so that you can put your conductive thread through seve...

SKU: PI-COM0602

A pack of ten 5 mm blue through-hole LEDs. These standard-size LEDs are versatile and easy to work with, fitting directly into breadboards, perfboard, and custom PCBs. Ideal for power indicators, status lights, decorative arrays, and general-purpose use in electronics projects. Key Features 5...

SKU: PI-COM0611

A pack of five 10 mm white through-hole LEDs. These large-format LEDs are bright and easy to work with, suitable for breadboard prototyping and finished projects alike. With standard through-hole leads, they fit directly into breadboards, perfboard, and custom PCBs. Ideal for power indicators, s...

SKU: PI-COM0607

A pack of five 10 mm red through-hole LEDs. These bright, easy-to-use LEDs are great for power indicators, status lights, decorative arrays, and general prototyping on breadboards or in finished projects. Key Features 10 mm Form Factor – Large, highly visible LED Red Colour – Classic indicato...