All Products

SKU: AF-2098

A 40-pin FPC extension board with an included 200mm flexible flat cable. Adds approximately 22cm of reach (20cm cable plus 2cm board) to devices using 40-pin, 0.5mm pitch FPC/FFC connections such as TFT displays. The board features two 40-pin flex connectors (both bottom-contact type), allowing ...

SKU: AF-1436

The Adafruit Multi-pitch FPC Adapter breaks out 40 pins of flexible printed circuit (FPC) cable to standard 0.1" spaced headers for easy breadboard prototyping. With pads for 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, and 1.0 mm pitch cables, it covers the most common FPC connector spacings in a single vers...

SKU: AF-4909

A 40-pin FPC to right-angle 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket direc...

SKU: AF-4905

A 40-pin FPC to straight 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket directly...

SKU: AF-4897

A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...

SKU: AF-4904

A 40-pin FPC to straight 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT or...

SKU: AF-4933

A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connections or other 40-pin ribbon cable applications. Pair this cable with compatible ...

SKU: AF-2571

This 50-pin FPC extension board lets you add approximately 22cm of reach to any 50-pin, 0.5mm pitch FPC/FFC connection. The board features two 50-pin flex connectors with a 200mm (20cm) FPC cable included, giving a total extension of about 22cm when the board length is included. Works with 50-pi...

SKU: SF-CAB-28768 · MPN: CAB-28768

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Gravity Adapter Cable allows interoperability between the SparkFun Qwiic Connect Syste...

SKU: AF-4523

A simple 40-pin FFC/FPC extender that connects two 0.5mm pitch flexible flat cables end-to-end, extending the total cable length. Ideal for reaching between components that are further apart than a single cable allows. The extender uses two ZIF (zero insertion force) connectors. Carefully pry th...

SKU: LB-PT22027

The Raspberry Pi 40-Pin GPIO Double Expansion Board splits your Pi's single GPIO header into two, letting you connect multiple HATs, breakout boards, or accessories simultaneously without stacking conflicts. Simply connect it to your Raspberry Pi's 40-pin header, and you'll have two full GPIO br...

SKU: AF-1932

A labelled breakout board for 40-pin dot-clock TFT displays with an integrated LED backlight driver. Breaks out all 40 FPC pins to breadboard-friendly through-hole pads and includes a FAN5333-based boost converter for driving backlight LED strings up to 24V. The backlight driver defaults to 25mA...

SKU: AF-4635

These premium extension jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit black). They have 0.1" socket 'female' header contacts on one end and  0.1" p...

SKU: RP-SC1128

An adapter cable for connecting Raspberry Pi Camera modules to the Raspberry Pi 5. The Pi 5 uses a smaller 22-way, 0.5mm-pitch "mini" FPC connector for its two four-lane MIPI ports, while current Raspberry Pi cameras use the older 15-way, 1mm-pitch "standard" connector — this cable bridges the tw...

SKU: DF-DFR1250 · MPN: DFR1250

Introduction The LattePanda IOTA M.2 M-Key Expansion Board is a dedicated interface adapter designed to unlock the full potential of the LattePanda IOTA single-board computer . It functions by converting the board's native 16-pin FPC PCIe interface into a universally recognized M.2 M-Key slot. Th...

SKU: AF-4823

A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...

SKU: SF-PRT-17258

This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tig...

SKU: LB-LS0658

This is the Raspberry Pi Cascaded plate GPIO Extension board, a board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to jumper wire friendly connectors. The Raspberry Pi Cascaded plate GPIO Extension board is compatible with the Raspberry Pi Model 2, Mod...

SKU: WS-30535 · MPN: 30535

A PCIe adapter board for the Raspberry Pi 5 that supports up to four M.2 NVMe SSDs simultaneously. Connect via the Pi 5's PCIe interface using the included 16-pin cable and gain dramatically faster storage for NAS builds, data processing, and boot-from-SSD setups. The board includes an on-board ...

SKU: AF-6036 · MPN: ADA6036

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 20cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — making connections straightforward. Designed to work with Raspberry Pi 5 DSI/CSI connectors and RP2350 boards w...