All Products

SKU: AF-4254

The Adafruit Quad Side-By-Side FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a linear side-by-side layout — no stacking headers needed. All four sets of Feather pins are cross-connected, so every FeatherWing shares the same bus signals, power, and grou...

SKU: AF-5800 · MPN: ADA5800

Built for larger TTL-interface TFTs, this development board makes it much easier to experiment with 40-pin RGB-666 displays using an ESP32-S3. It is aimed at panels that go beyond the usual SPI-driven sizes and resolutions, including square, round and bar-style displays that need continuous pixel...

SKU: AF-5625

The Adafruit Qwiic / STEMMA QT 5-Port Hub is a passive I2C splitter that lets you connect up to five STEMMA QT or Qwiic devices in a star topology instead of a long daisy chain. This reduces I2C line capacitance and gives you more flexibility in your mechanical layout. The board has five vertica...

SKU: AF-5961 · MPN: ADA5961

The Adafruit Qwiic / STEMMA QT Breakout Board bridges the gap between the STEMMA QT / Qwiic connector world and standard 0.1" breadboard pins. One end has a JST SH-compatible connector for plug-and-play I2C, and the other has four 0.1" spaced pads for soldering headers or wires to a breadboard. ...

SKU: AF-3230

The Adafruit Radio FeatherWing RFM69HCW @ 433 MHz adds short-to-medium range packet radio to any Feather board. Based on the SX1231 transceiver, this FeatherWing provides FSK packet radio with built-in AES-128 encryption, auto-retransmit, and multipoint networking — ideal for sensor networks, rem...

SKU: AF-3229

The Adafruit Radio FeatherWing RFM69HCW @ 900 MHz adds short-to-medium range packet radio to any Feather board. Based on the SX1231 transceiver, this FeatherWing provides FSK packet radio with built-in AES-128 encryption, auto-retransmit, and multipoint networking at 868/915 MHz (software configu...

SKU: AF-2359

The Adafruit Raspberry Pi A+ Case is a slim, durable polycarbonate enclosure designed specifically for the Raspberry Pi Model A+. With a smoke-tinted base and clear top, it offers a clean, professional look while keeping your Pi protected and accessible. Designed by Mike Doell, the case features...

SKU: AF-2258

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected and fully accessible. The case features slim openings for all cables, a bevell...

SKU: AF-3253

The Adafruit Raspberry Pi Camera Board Case is a compact two-piece polycarbonate enclosure that protects your Pi Camera while providing a 1/4" tripod mount on the back. Designed by Mike Doell, it snaps together without screws and features a sleek black base with a clear top. The case includes a ...

SKU: AF-3252

The Adafruit Raspberry Pi Zero Case is a compact two-piece polycarbonate enclosure that protects your Pi Zero while keeping all ports accessible. Designed by Mike Doell, it features a sleek black base and clear top that snap together without screws. The case provides slim openings for mini HDMI,...

SKU: AF-6001 · MPN: ADA6001

The Adafruit Reversible USB Type A Plug Connector Breakout breaks out a reversible USB Type A plug to breadboard-friendly pins. The connector uses a thin centre contact so it can be plugged in either way — no more guessing which side is up. The connector is a hybrid through-hole and SMT design w...

SKU: AF-4072

The Adafruit RFM69HCW Transceiver Radio Bonnet @ 868/915 MHz adds sub-GHz packet radio to your Raspberry Pi. Plug it onto the GPIO header and communicate with remote sensor nodes over distances of up to 500 m (line of sight) using the 868 or 915 MHz ISM bands — with built-in AES-128 encryption an...

SKU: AF-3071

The Adafruit RFM69HCW Transceiver Radio Breakout @ 433 MHz is a breadboard-friendly packet radio module for adding long-range wireless communication to Arduino and other microcontroller projects. Based on the SX1231 transceiver, it provides FSK packet radio with AES-128 encryption, auto-retransmi...

SKU: AF-3070

The Adafruit RFM69HCW Transceiver Radio Breakout @ 868/915 MHz is a breadboard-friendly packet radio module for adding long-range wireless communication to Arduino and other microcontroller projects. Based on the SX1231 transceiver, it provides FSK packet radio with AES-128 encryption, auto-retra...

SKU: AF-3073

The Adafruit RFM95W LoRa Radio Transceiver Breakout lets you send data over very long distances using the 433 MHz licence-free ISM band. Based on the SX1276 LoRa chipset, this breakout achieves ranges of approximately 2 km line of sight with a simple wire antenna — or up to 20 km with directional...

SKU: AF-3072

The Adafruit RFM95W LoRa Radio Transceiver Breakout lets you send data over very long distances using the 868 or 915 MHz licence-free ISM bands. Based on the SX1276 LoRa chipset, this breakout achieves ranges of approximately 2 km line of sight with a simple wire antenna — or up to 20 km with dir...

SKU: AF-3211

The Adafruit RGB Matrix Bonnet makes it easy to drive HUB75-type RGB LED matrices directly from your Raspberry Pi. Simply plug the bonnet onto any Pi with a 40-pin GPIO header, connect your matrix via the IDC cable, attach a 5 V power supply, and run the provided Python code to create colourful s...

SKU: AF-3036

The Adafruit RGB Matrix FeatherWing Kit lets you drive HUB75-type RGB LED matrices from any SAMD21 M0 or SAMD51 M4 Feather board. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosystem...

SKU: AF-4702

The Adafruit RGB Matrix FeatherWing Kit for nRF52840 lets you drive HUB75-type RGB LED matrices from nRF52840-based Feather boards. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosyst...

SKU: AF-2345

The Adafruit RGB Matrix HAT + RTC makes it easy to drive HUB75-type RGB LED matrices from your Raspberry Pi. This HAT plugs onto any Pi with a 40-pin GPIO header and includes a DS1307 real-time clock, so your Pi can keep accurate time even after reboots or power loss — perfect for clock and time-...