All Products

SKU: LB-LS3700

Introducing our 3 in 1 USB Hub, the perfect solution for expanding your USB connectivity! This compact and lightweight hub features 3 USB-A ports, allowing you to connect multiple devices simultaneously. Made from durable ABS material, it is designed to withstand daily use. With a weight of only ...

SKU: SF-CAB-14724

This is a USB 3.0 type A to Micro-B cable. If you’re unfamiliar, this isn’t your typical micro USB cable, boasting a data transfer rate of up to 5GB/s making it a “SuperSpeed” USB option. This connector type is less common than its other micro USB siblings, but can still be found in some phones a...

SKU: SF-CAB-14743

USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this is the cable you’re going to need. Supporting USB 3.1 speeds, this 1 meter cable is perfect for high data rate transfers and charging via USB 3.0 or above ports with an A type connector. The US...

SKU: SF-DEV-09713

The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard friendly and includes all of the external circuitry needed to get the PIC32 up and ru...

SKU: DF-DFR1168 · MPN: DFR1168

##Introduction This is a high-performance Thunderbolt 4 graphics card expansion dock specially prepared for LattePanda Sigma users. It has a Type-C interface and PCIe x16 card slot onboard. Equipped with the ASM2464PD chip, it has excellent anti-interference performance, achieves seamless data tr...

SKU: AF-3629

A solderless breakout adapter that connects a USB-A female socket to a 5-pin screw terminal block. Simply use a small screwdriver to open the terminal blocks, slide in your stranded or solid-core wire, and tighten — no soldering required. The removable terminal block is more durable than soldere...

SKU: SF-PRT-21870

A simple plug and play USB C to A converter (and vice-versa). This allows you to run devices and cables with the classic USB Type A connector off a device or adapter with a USB Type C port. It features up to USB 3.1 speeds.

SKU: AF-988

This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple - one end has a USB A female jack and the other has a 'standard' 5.5mm OD/2.1mm ID barrel jack with center positive polarity. It does not have any...

SKU: AF-4214

If you need to add a panel-mount connection for Micro USB, but don't have the time or ability to cut a custom oval or square hole, this USB A Jack to Micro USB B Jack Round Panel Mount Plug is the easiest and fastest way to panel-ify your existing kit. It's about 30mm in diameter, so you can dril...

SKU: AF-3628

This adapter converts a USB-A male plug into a 5-pin screw terminal block, making it easy to connect bare wires to a USB port without soldering. Just loosen the terminal screws, insert your stranded or solid-core wire, and tighten. All five pins are clearly labelled (VCC, D−, D+, GND, and Shield/...

SKU: AF-2185

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions. Perfect for connecting to your Raspberry Pi, Arduino Leonardo/Micro, FONA or Trinket (among other things). It's got extra beefy 24 AWG ...

SKU: AF-5461

This compact microadapter converts a USB Type-A port into a USB-C socket, letting you connect USB-C cables to older computers, laptops, and hubs that only have USB-A ports. The adapter supports USB 1.1 and USB 2.0 data transfer (no USB 3.0 pins). It provides standard 5 V power at up to 1 A — not...

SKU: AF-5329

If your computer has a USB A port still, and you want a small, cable-less way to connect our modern USB C devices, this little dongle will do the job nicely. It's quite simple - you've got your USB A plug on one side, a C plug on the other. Since C is reversible, you can always plug in your board...

SKU: AF-5030

If you've got a computer or laptop with a USB C port, but you're itching to use one of our fancy new Trinkeys, this adapter will do an excellent job at turning that USB Type C port into a USB A port!Works great with any device that has a USB C port. These adapters don't magically give you USB C s...

SKU: PI-CAB0224

A standard USB Type-A to Type-B cable, commonly used to connect Arduino Uno and Mega boards, printers, and other peripherals to a computer. Specifications Connectors – USB Type-A (flat) to Type-B (square) Length – 1 m Compatibility – USB 2.0 Colour – Black Package Contents 1× USB A to B ...

SKU: LB-PTRT

A 100 cm USB A-to-B cable with a right-angle Type-B connector, ideal for tight spaces where a straight connector won't fit. Works with Arduino Uno, Mega, printers, and other devices that use the standard USB Type-B port. Specifications Connector A – USB Type-A (straight) Connector B – USB Typ...

SKU: ET-2444224

1.8m Computer Cable with USB 2.0 type A male to micro USB 2.0 type B male connector, black PVC jacket and 28AWG conductor. It is suitable for the connection of devices with micro USB connector. Screened improved cable shielding External area of application 480MBit/S Maximum bandwidth

SKU: SF-CAB-25629

Upgrade your connections with this durable USB-A to Micro-B 2.0 cable! This 1-meter (3.2-foot) cable boasts a flexible silicone coating for easy management and tangle resistance. Perfect for connecting your devices with convenience.If you're trying to wrap your head around the world of USB cables...

SKU: PI-CAB0225

A short 10 cm USB A to Micro-B cable with a matte black finish and 22 AWG power lines for minimal voltage drop. The TPE cable shroud provides durability and flexibility. Key Features 10 cm Length – Compact cable for tidy, close-range connections 22 AWG Power Lines – Thicker gauge for low volt...

SKU: PI-CAB0227

High quality, power friendly and discrete USB A to Micro-B cables Available in a range of lengths for all possible uses (also available in red) Features: Matte black finish TPE cable shroud 22 AWG power lines for low voltage drop