All Products

SKU: AF-5634 · MPN: ADA5634

This breakout makes it easier to prototype with external QSPI flash memory, as used by many modern microcontrollers such as RP2040, ESP32, RT10xx and STM32 series devices. It carries a W25Q128JVSSIQ flash chip, giving you 128 Megabits / 16 Megabytes of extra storage for code and resources.The boa...

SKU: SF-COM-29062 · MPN: COM-29062

The RP2350A is a next-generation Raspberry Pi microcontroller IC designed for high-performance embedded projects, custom PCBs and compact connected devices. It builds on the RP2040 with a selectable dual-core, dual-architecture design, letting you run either Arm® Cortex-M33 cores or open-source H...

SKU: DF-SEN0628 · MPN: SEN0628

This compact 3D depth-sensing module sits between a simple single-point distance sensor and a full depth camera. It uses an 8×8 Time-of-Flight matrix to return depth data from 64 points, giving your robot or interactive project a much better sense of what is in front of it.Onboard firmware runs o...

SKU: AF-5633 · MPN: ADA5633

This breakout makes it much easier to prototype with external QSPI flash memory on modern microcontrollers such as the RP2040, ESP32, RT10xx and STM32 families. It adapts a wide 8-SOIC flash package to a neat 0.3" wide DIP format, so you can plug it into a breadboard, try different flash sizes, o...

SKU: AF-5632 · MPN: ADA5632

This breakout makes it much easier to prototype with external QSPI flash on modern microcontroller platforms such as RP2040, ESP32, RT10xx and STM32 designs. It converts a wide 8-SOIC flash package into a breadboard-friendly 0.3" wide DIP format, which is handy when you want to test different fla...

SKU: AF-5858 · MPN: ADA5858

Add USB host capability to a Feather-based project, so your microcontroller can talk to devices like keyboards, mice and USB mass storage drives. This board is built around the MAX3421E, a well-proven USB host controller that communicates with the main Feather over SPI plus an IRQ pin.It is a han...

SKU: SS-101020003

A simple momentary push button module in the Grove form factor. When pressed it outputs a HIGH signal; when released it returns to LOW. The button includes a built-in pull-down resistor, so it's ready to use as a digital input straight out of the box. Part of the Seeed Studio Grove ecosystem, it...

SKU: SS-101020044

Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable alcohol detector. Specifications Power requirements: 5 VDC @ ~120 mA (heater on) Detection Gas: Alcohol Concentration: 20-1000ppm Alcohol Inter...

SKU: SS-103030002

The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...

SKU: SS-103990049

USB To Uart 5V/3V3 is a USB to serial adapter,Which is base on CH340,CH340 is a USB bus convert chip and it can realize USB convert to serial interface, USB convert to IrDA infrared or USB convert to printer interface. this module is compatible with 5V and 3v3.and it can used for upload code or...

SKU: PR-PIM582

Swathe everything in rainbows with this all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strip. Plasma 2040 is a RP2040-based driver board for addressable LED strip (also known as magical rainbows by the metre). It's designed to make rigging up bits ...

SKU: PR-PIM610

A hackable, programmable badge with E Ink® display, powered by Raspberry Pi RP2040. In honour of Raspberry Pi's 10th birthday, we've fused a RP2040 microcontroller with an EPD display to make a stylishly monochrome, maker friendly, e-paper badge(r) to attach to your person, your office door...

SKU: PR-PIM618

A compact 4 channel motor+encoder controller, powered by RP2040. It has RGB and per-motor indicator LEDs plus built in voltage and current sensing. Motor 2040 is a standalone motor controller for driving motors with encoders attached. Encoder motors can provide feedback to the controller, enabli...

SKU: PR-PIM636

A hackable, programmable badge with 2.4" (320 x 240) TFT LCD colour display, powered by Raspberry Pi RP2040. We've had a lot of requests for a LCD version of Badger 2040 so tada - meet our pal Tufty. In a nutshell, we've combined a RP2040 microcontroller with a nice, crisp LCD screen to make a s...

SKU: SS-114991970

Description BitGadget Kit is a must-have for micro:bit intermediate learners.The included micro:bit expansion board, BitMaker incorporates six Grove connectors, one RGB LED strip and one buzzer to make it possible for some beginners to still use the micro:bit without purchasing extra modules.If...

SKU: RP-SC0918 · MPN: SC0918

IN STOCK NOW!The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same attributes as the Raspberry Pi Pico and also incorporates an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireles...

SKU: AF-6393 · MPN: ADA6393

E-Ink and E-Paper displays are excellent for low-power projects that need a daylight-readable screen. The image stays visible even when power is disconnected, with a high-contrast look that is much like printed paper.This is a bare 2.66 inch tri-colour EPD display element with red, black and whit...

SKU: AF-6392 · MPN: ADA6392

E-Ink and ePaper panels are ideal for low-power projects where you want a daylight-readable display that keeps showing its image even when power is removed. This bare 2.66 inch panel gives you a crisp, paper-like monochrome display for DIY eInk builds.This is the display element only, so it needs...

SKU: AF-6395 · MPN: ADA6395

E-Ink and E-Paper panels are excellent for projects that need a low-power, daylight-readable display. The image remains visible even when power is disconnected, giving a high-contrast, paper-like result for static information, labels, dashboards and portable builds.This is a bare 3.7-inch monochr...

SKU: AF-6382 · MPN: ADA6382

E-Ink and ePaper displays are ideal for projects that need a crisp, low-power screen that remains readable in daylight. The image stays on the display even when power is completely disconnected, giving it a printed-paper style look.This bare 4.2 inch diagonal tri-colour display has 400 x 300 pixe...