All Products

SKU: PR-PIM582

Swathe everything in rainbows with this all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strip. Plasma 2040 is a RP2040-based driver board for addressable LED strip (also known as magical rainbows by the metre). It's designed to make rigging up bits ...

SKU: PI-PIM743 · MPN: PIM743

An all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strips.Plasma 2350 is powered and programmable by USB-C and, because USB-C is capable of drawing up to 3A of power, that's enough to power a healthy chunk of LEDs. There's a useful button that you could...

SKU: AF-4228

These Reese's Piece's lookin' bits fit perfectly on top of tactile buttons with 2.4mm square tops and give a satisfying 8mm diameter surface area for your fingers to press.You get 10 candy-colored round caps. You get two of each color: red, yellow, white, gray, and Adafruit black. Snap these onto...

SKU: AF-1215

Get swinging with this handy plastic hinge, attach it to your 20mm extrusion and you can have parts that swing open 180 degrees. Using our button screws, the bumpy heads make it close around ~170 degrees, you can substitute countersink screws if you want a full 180.You'll also want to get some 10...

SKU: AF-4252

This plastic adapter connects a micro servo to LEGO-compatible cross axle parts such as gears, wheels, and beams. Simply push the adapter's spline housing onto the shaft of a compatible micro servo, and the other end accepts a standard LEGO cross axle — bridging the gap between hobby servos and b...

SKU: AF-275

By popular demand! We now have the plates from the ARDX available separately. Acrylic plate is engraved and cut here at the Adafruit factory. There are mounting holes for your Arduino and a space that fits a half sized breadboard very nicely. THIS DOES NOT FIT THE ARDUINO MEGA. Comes with: ...

SKU: AF-3821

Plastic pop rivets for quick, clean cardboard construction without tape or glue. Simply poke through the cardboard and fasten with the back piece to create sturdy joints and attachments. One rivet creates a rotating joint; two rivets hold pieces firmly in place. Works best with 2-ply cardboard, ...

SKU: AF-3822

Large plastic rivets designed for cardboard construction projects. Instead of tape or hot glue, simply poke through the cardboard and fasten with the back piece for clean, movable joints and secure attachments. Works best with 2-ply cardboard, cardstock, or other paper products approximately 2 m...

SKU: DF-FIT0726

Put on a sturdy and beautiful enclosure for your electronic project!This project box is made from high-quality ABS material, and the surface of the enclosure is sandblasted. There are screws in the package for convenient installation. Aside from that, the “ears” on the enclosure allow you to easi...

SKU: DF-FIT0725

Put on a sturdy and beautiful enclosure for your electronic project!This project box is made from high-quality ABS material, and the surface of the enclosure is sandblasted. There are screws in the package for convenient installation. Aside from that, the “ears” on the enclosure allow you to easi...

SKU: DF-FIT0724

Protect your electronic projects from rain and water splash using this waterproof IP68 enclosure. Made from high-quality ABS material, these boxes are sturdy and terrific for use indoors and outdoors. Each box has a transparent cover with a lid gasket, and there are screws and screw decorative ca...

SKU: DF-FIT0723

Protect your electronics projects from rain and water splash with this IP68-rated waterproof enclosure. Made from sturdy ABS with a transparent polycarbonate lid and silicone gasket, it's built for both indoor and outdoor use. Mounting ears on the enclosure allow easy fixing to walls, poles, or o...

SKU: DF-FIT0036

This is a high quality plastic servo horn. It fits DF series servos. Made specifically for DF series servos. SPECIFICATIONS Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12") Mounting holes: 1.5mm(0.06") DOCUMENTS Dimensions SHIPPING...

SKU: LB-LS01030

The solder vacuums are a great tool for solder rework. They allow you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger, heat up your solder, place the nozzle over the solder you want to remove and finally just push the button. The pisto...

SKU: RP-SC1148-TABS

Broke your rivets? - get a spare!

SKU: AF-997

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2" (Nominal non-taped National Pipe) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and w...

SKU: AF-3984

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small st...

SKU: AF-3290

A platinum resistance temperature detector (RTD) with a 100 Ω resistance at 0°C, offering superior accuracy and long-term stability compared to thermocouples and thermistors. PT100 sensors are widely used in laboratory and industrial temperature measurement where precision and repeatability matte...

SKU: AF-5773

Ostensibly this extension cord was originally designed to allow PlayStation game players to be able to sit across the room from their game system, but what we are using it for is to connect to PS controllers and accessories without soldering directly to cables or cutting the connectors off. Since...

SKU: M5-K011-B

The PLC Proto Industrial Board is a base module designed for industrial applications in the M5Stack ecosystem. It accepts 9–24 V DC power input and includes a protoboard area for custom circuit layouts, plus an RS485 adapter board with an integrated ACS712 current sensor for monitoring. Housed i...