All Products

SKU: PI-CAB0904

Need to expose HDMI, Ethernet, or USB to the outside of your project/enclosure? These lovely little 50cm panel mount extension cables are just the job! Each cable comes with one end in panel mount format so that you can securely fix it to a flat surface and expose a port externally. Great fo...

SKU: PI-CAB0903

A 50 cm panel mount HDMI extension cable for exposing an HDMI port on the outside of an enclosure or project box. One end features a panel-mount HDMI female socket with mounting holes, while the other end is a standard HDMI male connector. Specifications Connector (Panel Side) – HDMI female wi...

SKU: PI-CAB0902

Need to expose HDMI, Ethernet, or USB to the outside of your project/enclosure? These lovely little 50cm panel mount extension cables are just the job! Each cable comes with one end in panel mount format so that you can securely fix it to a flat surface and expose a port externally. Great fo...

SKU: PI-CAB0905

Need to expose HDMI, Ethernet, or USB to the outside of your project/enclosure? These lovely little 50cm panel mount extension cables are just the job! Each cable comes with one end in panel mount format so that you can securely fix it to a flat surface and expose a port externally. Great fo...

SKU: PI-CAB0906

Need to expose HDMI, Ethernet, or USB to the outside of your project/enclosure? These lovely little 50cm panel mount extension cables are just the job!Each cable comes with one end in panel mount format so that you can securely fix it to a flat surface and expose a port externally. Great for...

SKU: AF-3258

Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to extend the USB port for your Raspberry Pi, Arduino, Feather or really anything development board.This Micro-B male/female extension...

SKU: AF-3318

Check out this handy USB extension cable, which will make it easy for you to enclose a device that has a Mini-B USB type port. We think this would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, BeagleBone, or any other Mini-B device into a box!This Mini-B male/female extensio...

SKU: AF-978

This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi in a secure box. Two #4-40 screws are used to attach the female socket end, 26.9mm apart. Two hex-body standoff-screws are included as shown above and ...

SKU: AF-3121

Make your own custom HDMI input or HDMI interface with ease, using this HDMI Socket Breakout. You get a nice solid PCB with an HDMI socket that you can solder to assemble your own wiring jigs. You can add in some terminal blocks to make the wiring easier, or check out the HDMI Socket...

SKU: AF-3120

Make your own custom HDMI input or HDMI interface with ease, using this HDMI Socket to Terminal Block Breakout. You get a nice solid PCB with an HDMI socket and two strips of terminal blocks that you can use with stranded or solid core wire to assemble your own wiring jigs. We recommend this...

SKU: AF-5721

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at the edge of the camera board, and don't even mention trying to get a nice clean cut-out for the lens!Mounting these tiny yet awesome cameras on...

SKU: AF-1729

This panel-mount RCA cable provides a clean, permanent composite video or audio connection for enclosures and project boxes. Two RCA connectors (one panel-mount, one plug) are joined by a 264 mm (10.4″) cable, with two mounting screws spaced 20 mm apart for secure panel installation. Ideal for c...

SKU: AF-3395

This Panel Mount Right Angle 10K Linear Potentiometer w/ On-Off Switch is a two-in-one, with both a breadboard-friendly potentiometer and a switch. For the potentiometer-half, you've got a standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not s...

SKU: AF-3319

Make your next audio input/output project in a box with this handy Panel Mount Stereo Audio Extension Cable - 1/8" / 3.5mm. OK its quite a mouthful, but its pretty simple: that headphone or microphone jack you know and love? (OK everyone but you, Tim Cook!) Now you can attach it onto a bo...

SKU: SF-CAB-15463

This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 28.5mm apart.

SKU: AF-908

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy when putting a Beagle Bone, Raspberry Pi or Mintyboost into a box.The jack half has two mounting 'ears' with 4-40 screws installed, 30mm apart. The ear...

SKU: AF-937

This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when putting an Arduino Leonardo or Raspberry Pi in a box.The jack half has two mounting 'ears' with M3 screws installed, ~1.1" / ~29mm apart. Can be use...

SKU: AF-936

A panel-mount USB extension cable with a USB-B female jack on one end and a Mini-B male plug on the other. The jack features two mounting ears with pre-installed M3 screws, making it easy to add an external USB port to project enclosures for devices with Mini-B USB connections. Key Features Pa...

SKU: AF-907

This handy USB extension cable will make it easy for you to enclose a device that has a B type port. We think this would be most handy when putting an Arduino in a box.The jack half has two mounting 'ears' with M3 screws installed, 1.1" / 29mm apart. Can be used with box walls 0.125" to 0.25" wid...

SKU: AF-6004 · MPN: ADA6004

This panel-mount USB extension cable runs a USB Type-A port through an enclosure wall. The socket end has two flexible mounting ears with pre-installed M3 screws for securing to a panel, while the plug end connects to a USB host device inside the enclosure — ideal for Raspberry Pi, BeagleBone, or...