All Products

SKU: SF-DEV-09350

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each board are rated for 4 volts at 300mA, but will work at 5 volts with a reduction in current. LilyPad is a wearable e-textile technology developed by Le...

SKU: SF-DEV-08777

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient...

SKU: SF-DEV-08467

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that chann...

SKU: SF-DEV-11008

Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use.LilyPad is a wearable technology developed by Leah Buechley and c...

SKU: SF-DEV-10899

The LilyTiny is a compact LilyPad board with a built-in ATtiny85 microcontroller that drives four pre-programmed LED patterns. Simply sew on four LEDs and connect a battery — no programming or main board required. Each of the four output pads produces a different lighting effect: heartbeat pulse...

SKU: SF-DEV-11364

The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs ...

SKU: LB-LS6253

Introduce your child to the world of engineering and science with our Linear Gear Rail DIY Kit! This innovative toy allows children to build their own wire-controlled track wheel car, providing a fun and educational experience.Let your child's imagination run wild and give them the gift of learni...

SKU: AF-1182

The SK8 is an aluminium cast shaft support for 8mm linear rails. Simply slide the rail through the clamp, tighten the clamp screw to lock it in place, then bolt the support down to your frame using up to M6 bolts. Easy to open and reposition when you need to disassemble or adjust your build. Sol...

SKU: AF-178

A 100 mm linear soft potentiometer (ribbon sensor) manufactured by Spectra Symbol. This pressure-sensitive ribbon controller features an adhesive backing for easy mounting and provides a variable resistance output based on the position of touch along its length. Key Features 100 mm Active Leng...

SKU: LB-LS5006

This assortment pack contains 50 linear voltage regulators across 10 popular types, giving you a handy selection for power supply projects and prototyping. All regulators are in the TO-220 package and cover a wide range of fixed output voltages from 5 V to 24 V, plus the adjustable LM317T. Key F...

SKU: SF-SEN-24048 · MPN: SEN-24048

A line follower sensor gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared light, it can detect transitions from light to dark (lines) or even objects directly...

SKU: KI-5624-LF

Add line following capability to your Kitronik :MOVE mini buggy for the BBC micro:bit with this easy-to-assemble add-on kit. No soldering required — just mechanical assembly using the included hardware. Once built, the left and right sensors can be individually adjusted with a screwdriver to fin...

SKU: KI-5638

The Line Following Buggy with :MOVE line following board for the BBC microbit is the newest version of our very popular line following buggy. It offers a significant upgrade in the form of our new :MOVE line following board. Not only does it provide far superior line following it also makes th...

SKU: AF-1057

You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules: what great timing! These encapsulated laser diodes are Class IIIa 5mW, with a 650nm red wavelength. They can be drive...

SKU: TB-XC4574

The light sensor, also known as the light dependent resistor (LDR). Typically, the resistance of the light sensor will decrease when the ambient light intensity increases.   Linksprite Page   Specifications Required Supply Voltage 3.3V-5V Linker Kit Compatible Sensor Outputs ...

SKU: PR-PIM612

A range of compact, convenient USB-C LiPo/LiIon battery chargers, perfect for feeding hungry batteries. We've spent quite a lot of time at Pirate HQ over the last few weeks figuring out ways to charge up batteries for our Badger 2040s, and we've come up with all sorts of horrible solutions. Good...

SKU: LB-PT91009

Protect your valuables with our Lipo Battery Safe Bag! Made from high-quality, fire-retardant fiberglass nylon, this bag offers sturdy, durable protection against potential heat damage. While it’s not indestructible, it’s built to resist heat up to 550 ℃ (1000 ℉), making it a reliable choice for ...

SKU: DF-DFR0667

This Charger - MicroUSB is designed for single-cell 3.7V lithium battery. With its tiny body, you can easily integrate it into your applications. The charger adopts TP4056X lithium battery charging IC, which guarantees you quick and safe charging. Three output current modes can be easily switched...

SKU: DF-DFR0668

This is a Type-C  Lipo charger designed for single-cell 3.7V lithium battery. The compact size makes it easy to integrate into your applications. The charger adopts TP4056X lithium battery charging IC, which guarantees you quick and safe charging, and also you can easily switch between 3 out...

SKU: SF-TOL-20680 · MPN: TOL-20680

Keep an eye on your single-cell LiPo battery before your project suddenly runs out of power. This compact fuel gauge board sits in circuit with your battery and reports the relative state of charge using the MAX17043 fuel gauge IC.It combines a charge-estimation algorithm with direct A/D measurem...