All Products
Showing 41-60 of 92 products
Particle Mesh WiFi Bundle - Full Starter Kit
·
Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh Wi-Fi Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and co...
NFC/RFID breakout Module
The NFC/RFID breakout based on PN532, which is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a N...
SparkFun SAMD21 Dev Breakout
If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Dev Breakout is a great landing spot. The SparkFun SAMD21 Dev Breakout is an Arduino-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM...
FLIR Radiometric Lepton Dev Kit V2
Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. This kit includes a breakout as well a...
RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor
RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor RP2040-Touch-LCD-1.28 Based on Raspberry Pi RP2040 Features RP2040-Touch-LCD-1.28 is a low-cost, high-...
SWD 0.05 Pitch Connector - 10 Pin SMT Box Header
·
This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on our SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece of hardware with your own software. We're specifically selling it so you can solder it onto our nRF52 Feather to add SWD debu...
RedBear Duo
The RedBear Duo is a thumb-sized IoT development board with built-in Wi-Fi, Bluetooth 4.1 (dual mode), and Particle cloud connectivity. Everything you need to prototype connected devices is on board — just add your idea. Powered by an STM32F205 ARM Cortex-M3 at 120 MHz with Broadcom BCM43438 wir...
Particle Photon - WiFi development kit for IoT
The Particle Photon is a tiny Wi-Fi development board for prototyping Internet of Things products. Built around a Broadcom BCM43362 Wi-Fi chip (the same used in Nest Protect and LIFX) and a powerful STM32F205 120 MHz ARM Cortex M3 microcontroller, it connects your project to the Particle Cloud fo...
BLE Nano
The BLE Nano is the smallest Bluetooth 4.0 Low Energy development board available, measuring just 18.5 × 21.0 mm. Built around the Nordic nRF51822 SoC (ARM Cortex-M0 + BLE), it runs at 16 MHz with ultra-low power consumption and supports both BLE Central and Peripheral roles. The included MK20 U...
1.54inch E-Paper Display Development Board
The product is a high-performance, highly integrated microcontroller development board designed by Waveshare. It integrates high-capacity Flash and onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-li...
RPLiDAR C1 - DTOF LiDAR 360° Laser Range Scanner (12m, IP54)
·
##Introduction The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offering superior anti-interference and anti-adhesion capabilities. With a measurement...
USB Type A to Type C Cable - 6 long
This USB Type A to Type C cable provides a simple way to connect modern USB-C devices to computers, hubs, and chargers that use the standard USB Type A (rectangular) port. At just 6 inches long, it's perfect for short, tidy connections on your desk or inside enclosures. The cable includes built-...
6 x AA battery holder with 5.5mm/2.1mm plug
·
A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells for 7.2V at ~2000mAh. The 9V alkaline output is ideal for boards with a 5V volta...
USB to 2.1mm DC Booster Cable - 9V
·
This USB to DC booster cable has an integrated boost converter that steps up 5V USB power to 9V DC, output through a centre-positive 2.1 mm barrel jack. It's a convenient way to power 9V devices from any USB port — whether from a computer, USB wall charger, or battery pack. Rated for 500 mA cont...
USB C to Micro B Cable - 1 ft 0.3 meter
·
As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to Micro B plugs!USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. And who among us has in...
USB C to Micro B Cable - 3 ft 1 meter
·
As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to Micro B plugs!USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. And who among us has in...
3 Colour Male to Male Jumper Wire 20cm x 30
A pack of 30 male-to-male jumper wires in three colours — 10 red (power), 10 black (ground), and 10 yellow (signal). The colour coding makes it easy to keep breadboard and prototype circuits organised and readable at a glance. Key Features Colour-Coded – Red, black, and yellow for power, groun...
DFRobot DFR1195 ESP32-S3 LoRaWAN Dev Board with Display
·
This ESP32-S3 development board is built for long-range IoT prototyping using LoRa, LoRaWAN and Meshtastic. It can be used for one-to-one LoRa links, one-to-many LoRa communication, standard LoRaWAN networks, or Meshtastic mesh networking.The board is designed to be approachable for makers and de...
Adafruit Proximity Trinkey - USB APDS9960 Sensor Dev Board
·
The Adafruit Proximity Trinkey is a tiny USB-A development board built around the APDS9960 multi-function sensor and an ATSAMD21 microcontroller. Plug it into any USB port and you instantly have proximity, colour, ambient light, and gesture sensing — plus two NeoPixel LEDs and two capacitive touc...
Adafruit QT Py ESP32-S2 WiFi Dev Board with STEMMA QT
·
The Adafruit QT Py ESP32-S2 combines Wi-Fi connectivity with native USB in the compact QT Py form factor. Built around the ESP32-S2 — a single-core 240 MHz Tensilica processor with 4 MB flash and 2 MB PSRAM — this board can act as a USB keyboard, mouse, MIDI device, or disk drive while connecting...
