All Products

SKU: DF-FIT0031

A pack of 10 analog sensor cables designed for use with DFRobot IO Expansion Shields and compatible analog sensors. Each cable connects a sensor to the expansion shield's analog ports, making wiring quick and tidy. Each cable features a servo-type connector (Signal, GND, PWR) on one end and a 3-...

SKU: SF-DEV-10406

This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as well. This board can also be used as an antenna to the SM130 RFID module. Be sure t...

SKU: DF-DFR0131

Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping. The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use thi...

SKU: AF-2865

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: SS-110060024

The Grove Starter Kit for Arduino from Seeed Studio is a beginner-friendly electronics kit built around the Grove modular connector system. It includes a Base Shield with multiple Grove connectors, twelve plug-and-play modules, and a user manual to help you get started quickly — no soldering or c...

SKU: AF-1411

The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with a built-in clock — no continuous signal from your microcontroller needed. Up t...

SKU: AF-2866

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: FT-RX433

315MHz and 433MHz wireless connections are very commonly used by consumer electronics including weather stations, home automation remote controls, power consumption meters, car alarms, and also many DIY projects. The “Weather Station Receiver” project in the book “Practical Arduino” shows h...

SKU: SF-SPX-14669

The SparkFun BlackBoard is an Arduino Uno-compatible development board with a range of improvements over the standard Uno. It features the CH340G USB-to-serial converter for broad driver compatibility, a reinforced through-hole micro-B USB connector, an upgraded 600 mA 3.3V regulator with thermal...

SKU: TB-HM3230

A 40-pin single-row female header strip with standard 0.1" (2.54mm) spacing. This versatile header can be trimmed to any length you need, making it perfect for custom projects and Arduino-compatible builds. The sockets accept standard 0.1" male header pins, creating reliable plug-and-socket conn...

SKU: SF-DEV-11021

The Arduino Uno R3 is the most popular Arduino board and an ideal starting point for learning electronics and programming. Built around the ATmega328 microcontroller, it offers a robust platform for prototyping, interactive projects, and connecting to sensors, actuators, and other hardware. The ...

SKU: SF-DEV-10914

It’s blue! It’s skinny! It’s the Arduino Pro! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Because the system voltage for this board is lower than other Arduino development boards, it may not be compatible with many Arduino shields which we...

SKU: TB-XC4454

This Arduino-compatible LCD shield combines a 16×2 character LCD display with a six-button keypad on a single board. The backlit display and built-in navigation buttons (up, down, left, right, select, and reset) make it easy to create user-friendly menus and interfaces for your Arduino projects. ...

SKU: SF-DEV-15123

The SparkFun RedBoard Qwiic is an Arduino-compatible development board in the UNO R3 form factor with a built-in Qwiic connector for solderless I2C hookup. It programs over USB Micro-B using the Arduino IDE — select "Arduino UNO" from the board menu and you're ready to go. Key improvements over ...

SKU: DF-DFR0600

PYNQ-Z2 is a FPGA development board based on ZYNQ  XC7Z020 FPGA, intensively designed to support PYNQ, a new open-sources framework that enables embedded programmers to explore the possibilities of xilinx ZYNQ SoCs without having to design programming logic circuits. Benefiting from progr...

SKU: AF-1141

The Adafruit Data Logging Shield makes it easy to save sensor data to an SD card with accurate timestamps. It combines an SD card interface with a real-time clock (RTC) and a prototyping area on an Arduino-compatible shield, so you can be logging data within minutes of setup. This R3-compatible ...

SKU: AF-789

The Adafruit PN532 NFC/RFID Controller Shield brings 13.56 MHz NFC and RFID capabilities to your Arduino. Built around the PN532 chipset — the most widely used NFC controller, found in virtually every NFC-enabled phone and device — it can read and write to NFC/RFID tags and cards of Type 1 throug...

SKU: AF-2601

The Adafruit RGB Matrix Shield simplifies connecting HUB75-type RGB LED matrices to Arduino-compatible boards. Instead of wiring up a bundle of individual connections, this shield handles all the routing for you — just solder on the headers and connector, plug it onto your board, and attach your ...

SKU: ET-2075343

The A000064 wireless proto shields allow an Arduino board to easily connect with an RF module, enabling wireless communication using external wireless modules. You can use the wireless module from Digi to create a network of Arduino boards, solder parts to the prototyping area to create your pro...

SKU: DF-DFR0256

The Mega Multi IO Expansion Shield lets you stack up to four shields simultaneously on an Arduino Mega or Due without worrying about I/O pin conflicts. All Mega I/O pins are expanded and routed to four separate shield slots, keeping your project clean and tidy with organised cabling. Key Feature...