All Products
Showing 41-60 of 100 products
5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long
·
This 100mm adapter cable connects STEMMA QT / Qwiic sensors to Arduino MKR boards. It features a 4-pin JST SH (STEMMA QT / Qwiic) connector on one end and a 5-pin JST SH (Arduino MKR I2C) connector on the other, with the wiring crossed over for correct pin mapping between the two systems. Use th...
Miniature Wired LEDs - 0805 SMT LED - Warm White - 5 pack
·
These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use this five-pack bundle of Miniature Wired 0805 LEDs for easy-breezy LED wiri...
Miniature Wired LEDs - 0805 SMT LED - Blue - 5 pack
·
These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use this five-pack bundle of Miniature Wired 0805 LEDs for easy-breez...
Miniature Wired LEDs - 0805 SMT LED - Pink - 5 pack
·
These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use this five-pack bundle of Miniature Wired 0805 LEDs for easy-breez...
Miniature Wired LEDs - 0805 SMT LED - Pure Green - 5 pack
·
These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use this five-pack bundle of Miniature Wired 0805 LEDs for easy-breezy LED wiri...
Adafruit EYESPI Pi Beret - Buttons, EYESPI and STEMMA QT
The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your Pi without counting pins or fiddling with breakout boards. The EYESPI standard ...
Adafruit Proto Doubler PiCowbell for Pico and PicoW
·
The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers required. It also adds LiPo battery charging, a power switch, reset button, STEMMA QT ...
Electronics Kit for Raspberry Pi Pico 2 WH
If you're looking for a Raspberry Pi Pico 2W Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico 2W.The components of this Pico 2W Electronics Kit enable you to create electronics circuits for light and sound.Pico 2 Breadboarding can be hard, t...
25W Soldering Iron with Deluxe Stand
A 25W soldering iron bundled with a heavy-duty metal stand and tip-cleaning sponge. The iron features a rubber sleeve handle for comfortable use and a screw-in replaceable tip that's plated for long life. Key Features 25W Power Rating – Suitable for general electronics soldering Plated Replac...
Tiny Code Reader from Useful Sensors
The Tiny Code Reader from Useful Sensors is a small, low-cost hardware module that reads QR codes. It's designed to be a simple way to provision a system, for example, by providing the Wi-Fi network name and password or providing input when there's no keyboard.Internally, the Tiny Code Reader bun...
Elecrow Electronic Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer
A comprehensive electronics starter kit with over 200 components for Arduino and Raspberry Pi projects. Includes a breadboard, power supply module, jumper wires, LEDs, resistors, capacitors, ICs, and more — everything needed to begin learning electronics and programming. Key Features 200+ Comp...
Jumper Wires Standard 7 M/M - 30 AWG (30 Pack)
If you need to knock up a quick prototype there’s nothing like having a pile of jumper wires to speed things up, and let’s face it: sometimes you want quantity over quality. These are the same jumper wires that come with the SparkFun Inventor’s Kit, they’re less rugged than the premium jumper ...
Pins (header), 12 pins, 0.1 inch (2.54 mm) spacing
A single-row male pin header strip with 12 pins at standard 0.1" (2.54 mm) spacing. Designed for soldering into PCBs and breakout boards, these headers provide reliable connections for breadboarding, jumper wires, and board-to-board stacking. Specifications Pins – 12 Pitch – 0.1" (2.54 mm) R...
Bee-Bot Mobile Learning Kit Bundle
·
Six Bee-Bots, a charging dock and a set of teaching accessories, all packed into a single carry case. This is the bundle for schools that share one set of floor robots between classrooms rather than leaving them in one room — pick up the bag, walk it down the corridor, and the whole coding lesson...
DFRobot Building Block Expansion Board Bundle for UNIHIKER M10
·
This bundle adds motor, servo and sensor expansion to the UNIHIKER M10 single-board computer, using the included Type-C to HY2.0-4P communication cable to bridge the M10 to the expansion board.The board includes an integrated 18650 battery holder so your controller, motors and sensors can run fro...
micro:bit v2 Go Bundle
The BBC micro:bit v2.21 Go Bundle is the perfect way to jumpstart your journey into coding, creativity, and digital innovation. This pocket-sized computer is packed with features, making it ideal for all sorts of projects—from building robots to crafting musical instruments and much more. What’s...
micro:bit Go (On-the-go Starter Bundle)
micro:bit is a pocket-sized microcontroller designed for kids and beginners learning how to program, letting them easily bring ideas into DIY digital games, interactive projects and robotics.micro:bit comes with a variety of on-board modules, including a 5x5 LED matrix (also supports light detect...
Paper Signals Bundle
·
Paper Signals is an open source project that lets you make little voice-controlled objects that track simple things, like the weather. You can build any of the example Paper Signals Google has on g.co/papersignals. Or, grab the code on GitHub and create something of your own. To make one, you’...
Ozobot Evo Value Bundle
The Ozobot Evo Value Bundle includes: 6 x Ozobot EVO Starter packs (including 6x Charging Cables, Colour Markers, Protective Skins and Cases) 1 x USB Charging Station 1 x DIY Skins pack 1 x EVO Experience pack 1 x Colour Code Stickers Pack 2 x Black Markers Packs Expand your child’s horizons with...
Ozobot BIT 2.0 Value Bundle
The Ozobot BIT 2.0 Value Bundle Includes:6 x Ozobot BIT, Charging Cables, Protective Skins and Cases1 x USB Charging Station1 x Bit DIY Skins pack1 x Colour Code Sticker Pack3 x Colour Markers1 x Black MarkersOzobot Bit 2.0 is the second generation, award-winning smart miniature robot that bridge...
