All Products

SKU: DF-KIT0152-EN

MindPlus Coding Kit for Arduino is a set of tools for programming learning. As its compatibility for Mind+, a graphical coding software for starters, and Arduino IDE, this kit is well applicable to students from the lower grade to the higher grade. It comes with an Arduino Uno R3 mainboard and a ...

SKU: DF-DFR0502

Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped with Gravity sensor interface and TB6612FNG dual motor driver. It also has XBee socket, I2C interface and UART po...

SKU: DF-DFR0640

Based on Kendryte K210 RISC-V AI processor, Maixduiono AI development board comes with MI AI module and ESP32 module for WiFi and Bluetooth connectivity in Arduino UNO form factor. K210 comes with dual-core processor chip with independent FPU, 64 bits CPU bit width, 8 MB on-chip SRAM, 400 adju...

SKU: DF-SEN0504

TF02-i LiDAR is an industrial-grade medium-range distance sensor. Its maximum detection range can reach up to 40m and it has an adjustable frame rate with a maximum of 1KHz.This rangefinder has a PC/ABS/PMMA enclosure with IP65 water and dust resistance. It supports a wide range of input voltages...

SKU: AF-5403

Piunora by Diode Delights is a compact, easy-to-use development board for electronics prototyping with Linux. It has a familiar form factor, legible pin labels, and a design that’s well suited to space-constrained applications.As a carrier board for the Raspberry Pi Compute Module 4 (CM4), Piuno...

SKU: PI-A000073

The board everybody gets started with, with the ATmega328 (SMD). It has 14 digital IO pins (6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, and more. The Arduino Uno SMD R3 is a microcontroller board based on the ATmeg...

SKU: AF-789

The Adafruit PN532 NFC/RFID Controller Shield brings 13.56 MHz NFC and RFID capabilities to your Arduino. Built around the PN532 chipset — the most widely used NFC controller, found in virtually every NFC-enabled phone and device — it can read and write to NFC/RFID tags and cards of Type 1 throug...

SKU: EC-ELE18713S

This upgraded starter kit is the most economical way to start Arduino programming for those beginners who are interested. It’s the most economical way to start learning Arduino programming and electronics.Features 100% compatible with Arduino software, sendsors and codes. Provides an efficient wa...

SKU: AF-1438

The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. Drive up to 4 DC motors or 2 stepper motors plus 2 hobby servos from a single sta...

SKU: EC-ELE18712S

A comprehensive Arduino starter kit packed with over 200 components, sensors, and modules. Everything comes pre-soldered and ready to wire up, making it ideal for beginners learning electronics and programming. Built around a UNO R3 compatible controller board, this kit includes a wide variety o...

SKU: AF-802

The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. This R3-format shield works with any Arduino or Metro board including the Metro M...

SKU: SF-DEV-10914

It’s blue! It’s skinny! It’s the Arduino Pro! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Because the system voltage for this board is lower than other Arduino development boards, it may not be compatible with many Arduino shields which we...

SKU: DF-KIT0111

The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible with Arduino UNO) along with 12 popular sensors and components from DFRobot's Gra...

SKU: SF-DEV-11113

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommen...

SKU: SF-DEV-11114

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We reco...

SKU: AF-715

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connection would require, while still allowing other I²C devices to share the bus. The ...

SKU: YH-6000200053

The Yahboom 6WD Off-Road Smart Robot is a high-performance mobile robot kit based on the Arduino UNO. Equipped with a WiFi camera module, Bluetooth 4.0, six independent motors, and an aluminium alloy chassis with adjustable shock absorbers, it handles indoor floors, outdoor lawns, inclined surfac...

SKU: KI-5313

The Kitronik Inventor's Kit for Arduino is a great way to get started with programming and hardware interaction with the Arduino. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors. Arduino is an open-source code-able e...

SKU: AF-716

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and keypad inputs, leaving your remaining pins free for sensors and other peripherals...

SKU: AF-249

This pack includes everything you need to build a light and temperature data logger with an Arduino. The Adafruit data logger shield records sensor readings to an SD card with real-time timestamps, while the included photocell and TMP36 temperature sensor provide light level and temperature measu...