All Products

SKU: AF-3036

The Adafruit RGB Matrix FeatherWing Kit lets you drive HUB75-type RGB LED matrices from any SAMD21 M0 or SAMD51 M4 Feather board. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosystem...

SKU: AF-4254

The Adafruit Quad Side-By-Side FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a linear side-by-side layout — no stacking headers needed. All four sets of Feather pins are cross-connected, so every FeatherWing shares the same bus signals, power, and grou...

SKU: AF-4569

The Adafruit ISM330DHCX + LIS3MDL FeatherWing combines two precision ST sensors to deliver 9 degrees of freedom — accelerometer, gyroscope, and magnetometer — in the Feather form factor. Stack it onto any Feather board for industrial-quality motion sensing with AHRS orientation capability. The I...

SKU: AF-4565

The Adafruit LSM6DSOX + LIS3MDL FeatherWing is a precision 9 Degree of Freedom (9-DoF) IMU add-on for any Feather board. It combines the LSM6DSOX accelerometer/gyroscope — known for its exceptionally low gyro drift and noise — with the LIS3MDL magnetometer for complete orientation and heading sen...

SKU: AF-4702

The Adafruit RGB Matrix FeatherWing Kit for nRF52840 lets you drive HUB75-type RGB LED matrices from nRF52840-based Feather boards. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosyst...

SKU: AF-4253

The Adafruit Quad 2×2 FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a compact 2×2 grid layout — no stacking headers needed. All four sets of Feather pins are cross-connected, so every FeatherWing shares the same bus signals, power, and ground. Each of...

SKU: AF-5709

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...

SKU: AF-3357

The Adafruit Music Maker FeatherWing turns any Feather board into a versatile audio player and MIDI synthesiser. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, with digital bass, treble, and volume controls — all over a lightweight SPI interf...

SKU: AF-3436

The Adafruit Music Maker FeatherWing with Amplifier brings powerful audio playback to any Feather board. Built around the VS1053B codec chip, it decodes a wide variety of formats including MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, and WAV — and includes an on-board 3W class-D stereo amplifier so you...

SKU: AF-3106

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in blue. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall blue 7-segment display with decimal points and a centre colon for clock displays. ...

SKU: AF-3108

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in red. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall red 7-segment display with decimal points and a centre colon for clock displays. Th...

SKU: AF-3109

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in white. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall white 7-segment display with decimal points and a centre colon for clock displays....

SKU: AF-3110

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in yellow. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall yellow 7-segment display with decimal points and a centre colon for clock display...

SKU: AF-5708

The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. This is a transceiver only — it does not include a CAN controller, so your microco...

SKU: AF-3173

A simple, solder-on terminal block set sized to fit Adafruit Feather boards and FeatherWings. These 0.1″ pitch terminal blocks let you make secure, screw-down wire connections without soldering wires directly to your board — making projects easier to build, maintain, and modify. Compatible with ...

SKU: AF-5877 · MPN: ADA5877

The Adafruit CAN Bus BFF is a compact add-on that brings CAN bus capabilities to any QT Py or Xiao board. Powered by the MCP26525 chipset with SPI interface, it provides better range and addressing than I2C, making it well suited for robotics and sensor networks. Drivers are available for both Ar...

SKU: AF-3090

Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just two I2C pins. Works with any Adafruit Feather board. The FeatherWing is perfect f...

SKU: AF-3128

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in blue adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C m...

SKU: AF-3129

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in green adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C ...

SKU: AF-3127

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in white adds a bright, easy-to-read 4-character 14-segment LED display to any Feather microcontroller. Each character can show full alphanumeric text (A–Z, 0–9) plus symbols, making it ideal for clocks, sensor readouts, status messages, an...