All Products

SKU: AF-5294

This 20-pin GPIO ribbon cable provides a clean, reliable connection between PCBs, development boards, and breakout headers. The soft, flexible 0.05″ ribbon cable with keyed IDC connectors on both ends ensures correct orientation every time. Pin 1 is marked with a pink stripe along the side of th...

SKU: AF-4170

A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable edge. Key Features 16 Pins (2×8) – Standard IDC ribbon cable layout 305mm (1...

SKU: AF-862

That new Raspberry Pi® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or l...

SKU: AF-1988

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, ...

SKU: AF-2223

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra long 10mm pins, compared with our p...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: EC-AMC01017B

The A9G development board is a compact IoT module combining GPRS/GSM cellular connectivity with GPS/BDS dual-mode positioning. Based on the A9G module, it supports voice calls, SMS, GPRS data networking, and real-time location tracking — all on a single board. Packed with peripherals including a...

SKU: EC-WAG03010G

This is a GPS Active Antenna which can make you received the GPS form indoor. Its cable is 3m. It can be used with our GPS Shield to make the GPS Shield can be used in the home or somewhere don't have GPS signal.Specification Frequency: 1575.42MHZ Voltage: 3.0-5.0V Size: 3.9 x 5.0cm Cable Length:...

SKU: AF-960

Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truc...

SKU: SF-GPS-17519

Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the solution! This plate significantly increases the performance of GPS and GNSS ante...

SKU: DF-TEL0132

A compact multi-constellation GNSS positioning module based on the AT6558 chip with 32 tracking channels. It simultaneously receives signals from six satellite navigation systems: GPS, BeiDou, GLONASS, Galileo, QZSS, and SBAS (WAAS, EGNOS, GAGAN, MSAS) for accurate joint positioning. The module ...

SKU: WS-8781 · MPN: 8781

Enhance your positioning accuracy with our high-performance GPS External Antenna, designed with an integrated amplifier and superior ceramic technology for optimal signal capture and amplification. Suited for a multitude of positioning and navigational applications, this antenna is the perfect ac...

SKU: SF-GPS-14987

This tri-band GNSS antenna is ideal for GPS L1, GLONASS L1, and Beidou B2 reception. At 45x45mm it is a large ceramic antenna with an incredible 38dB LNA gain.This antenna works well with the GPS-RTK providing reception of Beidou satellites where other more basic GPS antennas cannot. We’ve chosen...

SKU: SF-GPS-14986

This GPS/GNSS magnetic mount antenna is designed for multi-constellation reception, supporting both GPS and GLONASS satellite systems. The magnetic base allows easy mounting on any metal surface such as a vehicle roof or ground plate, and the 3 m cable with standard SMA connector provides flexibl...

SKU: SF-GPS-19166

The GP-1818MK is a low-cost - high performance GPS module with built in antenna. It can provide position, velocity, and accurate timing through the standard NMEA-0183 protocol. Being low power and compact in design, the GP-1818MK is perfect for basic tracking and positioning, especially with resp...

SKU: DF-TEL0094

You must have used a GPS receiver. It is easy to be found in most places, such as smartphones, cars, and computers. They are used to track your loaction all over the globe. GPS Receiver for Arduino is a unit embedding GPS module and antenna in a small foot-print enclosure. By using TinyGPS li...

SKU: DF-TEL0083-A

This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement. GPS receivers can be easily found in daily life, such as smartphones, cars, and tablets. They are used to track the loaction all over the globe. This GPS Receiver for A...

SKU: SF-GPS-13670

The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim design makes it ideal for applications where you don’t have a lot of space to work...

SKU: SF-GPS-15005 · MPN: GPS-15005

Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK positioning down to 25mm so you can track the location of a device, robot or ve...

SKU: SF-GPS-22693 · MPN: GPS-22693

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, correction data and GNSS measurements to provide accurate and continuous positioning...