All Products

SKU: LB-LS0537

The DT-06 is a compact Wi-Fi-to-TTL serial module based on the ESP8285 — essentially an ESP8266 with 1 MB of built-in SPI flash. It provides a simple way to add Wi-Fi connectivity to any microcontroller project via a UART serial interface, using AT commands or custom firmware. The module support...

SKU: AF-4677

The ESP-PSRAM64H is a 64 Mbit (8 MB) serial pseudo SRAM chip in a compact SOIC-8 package. It provides fast, unlimited read/write external memory for microcontrollers like the ESP32 and Teensy 4.1, which have dedicated PSRAM pads or memory-mapping support for seamless integration. Unlike flash or...

SKU: SF-WRL-25497

The Espressif Thread Border Router combines Espressif's Wi-Fi and 802.15.4 SoCs to bridge Thread mesh networks with IP-based networks. Built on ESP-IDF and the open-source OpenThread stack, it has obtained Thread 1.3 Certified Component certification and supports Matter application scenarios. Ke...

SKU: AF-3269

The Espressif ESP32 Development Board breaks out all ESP32 module pins to standard 2.54 mm (0.1 in) headers, with a CP2102 USB-to-serial adapter for programming, boot and reset buttons, and an onboard 3.3 V regulator. It supports development via the Arduino IDE, ESP-IDF (Espressif's official tool...

SKU: SF-COM-26983 · MPN: COM-26983

This highly integrated Espressif Wi-Fi system-on-chip is designed for compact Internet of Things hardware that needs reliable 2.4GHz wireless networking with efficient power usage.The ESP8266EX can run as a standalone application processor or operate as a Wi-Fi adapter for a host microcontroller ...

SKU: SF-WRL-25498

A Sub-Ethernet daughter board which works with the ESP Thread Border Router board to extend an Ethernet interface. This allows you to use Ethernet with the fully featured Thread Border Router.

SKU: SF-PGM-25003 · MPN: PGM-25003

The Espressif Module Prog-1 is a dedicated programmer for flashing ESP32 modules without soldering. It uses spring pins to make a secure, swappable connection to supported modules, making it handy for development, testing or small production runs.To use it, place a compatible ESP32 module onto th...

SKU: AF-1887

Try the JavaScript of things with the Espruino - the world's first open-source JavaScript microcontroller! This little board has an STM32 microcontroller pre-programmed with Espruino all ready to go so you can start playing with Javascript-microcontrollers. Warning: if you only use Assembly an...

SKU: PI-ESP001

A tiny USB stick that runs JavaScript - control things in the real world in just seconds! The Espruino Pico is a tiny USB stick that runs JavaScript code (it doesn't need to be plugged into a computer). You can program it with nothing but a serial terminal program, but there's also an IDE that...

SKU: PI-ESP005

A smart LCD with Bluetooth LE. Monitor and control other Bluetooth LE devices, act as a wireless display, create your own smart conference badge, or even just display the status of your code - all while drawing tiny amounts of power. Pixl.js uses Espruino, so you program it in JavaScript - ...

SKU: AF-3372

The Espruino Puck.js is a low energy Bluetooth smart button that can be programmed and debugged wirelessly with JavaScript. It is both multi-functional and easy to use, with a custom circuit board, the latest Nordic chip, Bluetooth LE, NFC, magnetometer, temperature sensor, RGB LEDs,&n...

SKU: PI-ESP003

The Espruino WiFi is a tiny WiFi-enabled development board that runs JavaScript directly — no computer connection required after programming. Built around the STM32F411 (Arm Cortex-M4 at 100 MHz) with an ESP8266 WiFi module, it lets you write, upload, and debug JavaScript code using the Espruino ...

SKU: EC-DLC35020S

This handheld terminal is based on the ESP32 controller, equipped with a powerful ESP32-S3 chip, and supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), providing more powerful computing and processing capabilities for IoT terminal applications. It is suitable for various scenarios, such as industrial...

SKU: EC-WCW32110W

The ESP-WROOM-32 is Espressif's powerful Wi-Fi, Bluetooth Classic, and BLE module built around the ESP32 dual-core processor. It's a versatile platform for IoT applications ranging from low-power sensor networks to demanding tasks like voice encoding, music streaming, and MP3 decoding. This is t...

SKU: PI-IFIX-EU145348-2

The iFixit Essential Electronics Toolkit has everything you need to get started with electronics repair — from screen replacements and battery swaps to servicing home appliances, eyeglasses, and door hardware. All tools are neatly organised in a magnetised case with a built-in sorting tray lid. ...

SKU: SF-TOL-19766 · MPN: TOL-19766

These flat end mills are made for roughing and machining flat or prismatic parts on a compatible CNC mill or router.Each pack includes two cutters, giving you a spare for workshop use or a matched pair for repeat jobs. The tools use a 0.125" shank and 0.125" flute diameter, making them suitable f...

SKU: SF-TOL-19768 · MPN: TOL-19768

These V-bit cutters are made for engraving intricate patterns and fine details, especially where a sharp 90° V profile is useful. They work well with the V-carve feature in Carbide Create for sign making, decorative engraving and detailed CNC work.Each pack includes two cutters. The bits use an H...

SKU: SF-TOL-19769 · MPN: TOL-19769

These V-bit cutters are made for engraving intricate patterns and fine detail work, especially when using the V-carve feature in Carbide Create.The pack includes two cutters, giving you a spare on hand for CNC engraving and carving jobs.If you have, or are purchasing, a Nomad, make sure you also ...

SKU: AF-5143

When it's time to order components for your electronic product, where else is there to go but Digi-Key? With literally millions of parts available, its a one-stop-candy-shop from prototype to production. If you're like, us, visiting multiple times a day, why not dedicate a spot on your keyboar...

SKU: AF-5192

Show off your social-coding flair with a super-classy, custom-made and officially licensed Octocat Etched Keycap featuring the GitHub logo.It's made with a translucent/opaque plastic that is etched to create an elegant glow-through effect. Perfect to show your coder cred on your next mechanical k...