All Products

SKU: SF-KIT-15367

The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic connectors to your Pi's GPIO header, along with three sensor/display breakouts and ...

SKU: SF-GPS-16329

The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. The module provides continuous navigation without needing to make any electrical connection to a vehicl...

SKU: AF-4440

This compact 0.91" monochrome OLED display packs 128×32 individually controllable white pixels into a tiny, highly readable package. With no backlight needed, OLEDs deliver exceptional contrast and low power consumption — perfect for status displays, sensor readouts, and compact interfaces. The ...

SKU: LB-ABX00162

Meet Arduino UNO Q — a dual-processor development board that combines a Debian-based Linux computer with a real-time microcontroller. Build robots, edge-AI systems, and connected IoT devices on a single platform where Arduino sketches and Python run side by side through the Arduino App Lab. Devel...

SKU: SF-ROB-30118 · MPN: ROB-30118

Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...

SKU: AF-5255

The Adafruit LED Glasses Starter Kit includes everything you need to build a complete pair of programmable LED glasses. Pair the 116-LED front panel with the Bluetooth-enabled nRF52840 driver board, snap them onto the included fashion frames, and you're ready to create dazzling wearable light dis...

SKU: AF-4884

The Feather RP2040 brings the Raspberry Pi RP2040 dual-core processor to the Feather platform. With two ARM Cortex M0+ cores running at ~125 MHz, 264 KB SRAM, 8 MB SPI flash, and the RP2040's unique PIO (Programmable I/O) state machines, this board offers excellent performance for CircuitPython, ...

SKU: AF-4500

The Adafruit CLUE is a sensor-packed development board built around the Nordic nRF52840 with Bluetooth Low Energy. It matches the BBC micro:bit form factor and edge-connector pinout, making it compatible with existing micro:bit robot kits and add-ons. Packed with on-board sensors and a 1.3" colo...

SKU: SF-SEN-30282 · MPN: SEN-30282

Build a connected weighing system without starting from low-level load cell code. OpenScale IoT is a wireless scale controller built around the ESP32-PICO-MINI, designed to turn a standard load cell setup into a configurable, connected weigh scale.Attach a four or five-wire load cell, or use four...

SKU: AF-3967

The Adafruit VL53L1X (also known as VL53L1CX) is a next-generation Time-of-Flight (ToF) distance sensor from ST with an impressive 4-metre range and LIDAR-like precision. Using an invisible laser and matching sensor, it measures how long light takes to bounce back for accurate, reliable distance ...

SKU: AF-5610

The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configurable gain and integration time, it can measure from 0 to over 65,000 lux — suitab...

SKU: AF-6498 · MPN: ADA6498

Measure ambient light in real lux with a sensor that handles everything from very dim conditions to bright outdoor sunlight. This breakout is built around the MAX44009, an easy-to-use ambient light sensor that automatically ranges across a very wide span, so you can get smooth readings without co...

SKU: AF-4681

The Adafruit BH1750 Light Sensor is a 16-bit ambient light sensor from Rohm that provides measurements directly in lux — the SI unit for illuminance. This makes it easy to compare readings against reference values or other sensors without manual calibration or conversion. Packaged on a STEMMA QT...

SKU: AF-4741

The Adafruit Grayscale 1.5" OLED Display delivers 128×128 pixels with 16 levels of grayscale on a crisp, high-contrast OLED panel. Driven by the SSD1327 controller, it connects via I²C or SPI and includes STEMMA QT / Qwiic connectors for solderless I²C hookup. An on-board 3.3V regulator and 12V b...

SKU: AF-4831

The Adafruit LTR390 is a dual-purpose UV and ambient light sensor with true UVA sensing at a peak spectral response between 300 and 350 nm. Unlike UV index approximation sensors, the LTR390 has a genuine UV photodiode — giving you real ultraviolet light measurements over a simple I2C interface. ...

SKU: AF-5591

The Adafruit LTR-329 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configurable gain and integration time, it can measure from 0 to over 65,000 lux — suitab...

SKU: AF-5603 · MPN: ADA5603

Add a bright numeric display to your project without giving up a pile of microcontroller pins. This assembled Adafruit LED backpack pairs an ultra-bright green 4-digit, 0.56 inch seven-segment display with a driver board that handles the multiplexing for you.The onboard driver chip includes its o...

SKU: AF-4161

The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all over a simple I2C interface. The breakout includes 3.3V and 5V level-shifting circ...

SKU: SF-LCD-16397

The SparkFun 16×2 SerLCD is a serial-enabled LCD that provides a simple, cost-effective way to add an RGB-on-black liquid crystal display to your project. An on-board ATmega328P microcontroller handles all screen control, eliminating the need for a separate backpack board. The display supports t...

SKU: AF-4650

The Adafruit FeatherWing OLED 128x64 adds a crisp 1.3-inch monochrome OLED display and three tactile user buttons (A, B, C) to any Feather board. The 128×64 white OLED pixel array is self-emissive — no backlight needed — delivering high contrast and excellent readability in a compact form factor....