All Products
Showing 21-40 of 100 products
STC31 CO2 Sensor (Qwiic)
·
Measure high concentrations of carbon dioxide with a Qwiic breakout built around Sensirion’s STC31 sensor. It is designed for CO2 measurements up to 100% volume, using a thermal conductivity measurement principle and Sensirion CMOSens® technology for repeatable, stable readings.The board also inc...
Adafruit QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT
·
The Adafruit QT Py ESP32 Pico brings the full power of the classic ESP32 into the tiny QT Py form factor. Built around the ESP32-PICO-V3-02 — an all-in-one module with dual-core 240 MHz Tensilica processor, Wi-Fi, Bluetooth Classic + BLE, 8 MB flash, and 2 MB PSRAM — this thumbnail-sized board is...
Adafruit Sparkle Motion with wFL External Antenna
·
The Adafruit Sparkle Motion with wFL External Antenna is the flagship WLED smart LED driver with support for an external Wi-Fi antenna via a wFL connector. It offers the same full feature set as the standard Sparkle Motion — dual power options, three level-shifted LED outputs, built-in audio and ...
Mini Sparkle Motion with Pre-soldered Terminal Block
·
The Adafruit Sparkle Motion Mini is part of our series of "Sparkle Motion" boards, which are our attempt to make the best small WLED-friendly smart LED driving board in the whole world. Our resident mermaid, firepixie makes a lot of projects with WLED, and she loves it! So, how can we make someth...
Bulk BBC micro:bit v2.21 - 300 Pack
A bulk pack of 300 BBC micro:bit V2.2 boards, ideal for schools, makerspaces, and institutions rolling out coding and STEM programmes at scale. Each micro:bit is individually packaged for easy distribution in classrooms and workshops. The micro:bit V2.2 features a built-in speaker, microphone, c...
Adafruit Sparkle Motion - All-In-One WLED and xLights Board
·
The Adafruit Sparkle Motion is an all-in-one ESP32-based smart LED driver designed for WLED and xLights installations. It packs dual power options, three level-shifted LED outputs, built-in audio and IR sensors, and a STEMMA QT port into a compact, wearable-friendly board — ready to drive address...
Mini Sparkle Motion - WLED-friendly ESP32 NeoPixel LED Driver
·
Adafruit Sparkle Motion Mini – Compact WLED Smart LED DriverThe Adafruit Sparkle Motion Mini is a streamlined version of our Sparkle Motion series, designed to be the smallest and most powerful WLED-friendly LED driver in its class. Inspired by our resident mermaid and fire-dancer FirePixie, this...
Adafruit Sparkle Motion Stick - WLED-friendly USB Stick
·
The Adafruit Sparkle Motion Stick is a compact USB-A dongle version of the Sparkle Motion smart LED driver, designed for WLED projects that need a small, portable form factor. Powered via USB Type A at up to 5V 2A, it works with off-the-shelf USB battery packs for portable operation. The ESP32 m...
Adafruit Sparkle Motion Stick + Enclosure Kit
·
The Adafruit Sparkle Motion Stick is a compact USB-A dongle version of the Sparkle Motion smart LED driver, designed for WLED projects that need a small, portable form factor. This kit includes both the Sparkle Motion Stick and a snap-on enclosure with a button lever and USB port cap. Powered vi...
RP2350 1.43" Round AMOLED Display - 466x466, SPI, Accelerometer, Gyroscope, RTC
·
RP2350 1.43inch AMOLED Development BoardElevate your project's visual experience with the RP2350 1.43inch AMOLED Development Board, the ultimate blend of performance and stunning display. Designed for developers, hobbyists, and tech enthusiasts, this board offers the perfect canvas for your imagi...
Firebeetle Covers-OLED12864 Display
DFRobot FireBeetle series is low-power development board designed for the IoT projects. This FireBeetle covers display module is equipped with 128x64 resolution OLED and new version of SSD1360 driver IC, uses I2C interface, supports for the Arduino library and microPython coding progra...
RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor
RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor RP2040-Touch-LCD-1.28 Based on Raspberry Pi RP2040 Features RP2040-Touch-LCD-1.28 is a low-cost, high-...
FireBeetle ESP32-E IoT Microcontroller with header (Supports Wi-Fi Bluetooth)
FireBeetle ESP32-E, specially designed forIoT, is an ESP-WROOM-32E-based main controller board with dual-core chips. It supports WiFi and Bluetooth dual-mode communication, and features small size, ultra-low power consumption, on-board charging circuit and easy-to-use interface, which can be c...
Arduino Portenta H7 Lite Connected Development Board
·
##Introduction Portenta H7 Lite Connected is a high-performance MCU development board with integrated Wi-Fi and Bluetooth connectivity, and is a product in the Arduino Portenta H7 series. It uses the same STM32H7 MCU chip and Cortex-M7/Cortex-M4 core as Arduino Portenta H7, enabling complex multi...
Kitronik Inventor's Kit for the BBC micro:bit
The Kitronik Inventor's Kit is a comprehensive electronics starter kit designed for the BBC micro:bit. Includes everything you need to complete 12 hands-on experiments using LEDs, motors, LDRs, capacitors, a potentiometer, and a piezo buzzer — all with no soldering required. Comes with a step-by...
Pycom Pytrack - GPS+motion shield for WiPy, SiPy, and LoPy
The Pycom Pytrack is a GPS and motion sensor shield compatible with Pycom multi-network modules including the WiPy, SiPy, and LoPy. It provides accurate GNSS positioning, a 3-axis accelerometer, USB serial access, LiPo battery charging, and microSD storage — everything needed to get a location-tr...
AMP:BIT class D amplifier for micro:bit with headphone jack
The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...
Seeed XIAO RP2040 - Supports Arduino, MicroPython and CircuitPython
Features Powerful MCU: Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz Rich on-chip resources: 264KB of SRAM, and 2MB of onboard Flash memory Flexible compatibility: Support Arduino / Micropython / CircuitPython Easy project operation: Breadboard-friendly & SMD de...
Digi X-ON LoRaWAN IoT Node & Gateway Kit (North America)
·
This kit brings together the main parts needed to evaluate and deploy a LoRaWAN® IoT sensor system: a Digi HX15 Gateway for LoRaWAN®, a SparkFun IoT Node for LoRaWAN® board and a SparkFun ENS160/BME280 Qwiic Environmental Combo Board.The IoT Node ships with firmware installed that automatically c...
Relay for micro:bit
The MonkMakes Relay for micro:bit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off. A micro:bit can turn an LED on and off directly, but anything more powerful requires something like a relay or a transistor. Using a transistor to switc...