All Products
Showing 21-40 of 47 products
Adafruit Metro M4 Express AirLift (WiFi) - Lite
·
The Adafruit Metro M4 Express AirLift combines the powerful ATSAMD51J19 ARM Cortex M4 processor with an on-board ESP32 WiFi co-processor — all in the standard Metro/UNO shield-compatible form factor. With 120 MHz clock speed, floating point support, and built-in TLS/SSL for secure connections, th...
Metro M4 Express
·
Are you ready? Really ready? Cause here comes the fastest, most powerful Metro ever. The Adafruit Metro M4 featuring the Microchip ATSAMD51. This Metro is like a bullet train, with it's 120MHz Cortex M4 with floating point support. Your code will zig and zag and zoom, and with a bunch of extra pe...
Adafruit WINC1500 WiFi Shield with uFL Connector
·
Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption with TLS 1.2 for secure connections, and communicates over SPI at speeds up to 12...
I2C to 8-Channel Solenoid Driver
·
This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, inductive loads.Solenoid power connects through the centre terminal blocks, with eac...
Adafruit ItsyBitsy M0 Express - for CircuitPython Arduino IDE
·
The Adafruit ItsyBitsy M0 Express is a compact yet powerful microcontroller board built on the ATSAMD21 Cortex M0+ running at 48 MHz. At just 1.4" × 0.7", it delivers the same capability as the Metro M0 or Feather M0 Express in a fraction of the size — perfect for shrinking prototypes into final ...
Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface
·
The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with a built-in clock — no continuous signal from your microcontroller needed. Up t...
Adafruit ItsyBitsy M4 Express featuring ATSAMD51
·
The Adafruit ItsyBitsy M4 Express is a high-performance microcontroller board powered by the ATSAMD51 Cortex M4 running at 120 MHz with hardware floating point and DSP support. Packed into a tiny 1.4" × 0.7" form factor, it delivers 512 KB Flash, 192 KB RAM, and 2 MB of SPI Flash for CircuitPytho...
Adafruit AirLift Shield - ESP32 WiFi Co-Processor
·
Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main microcontroller can focus on your application logic. The ESP32 communicates ov...
Adafruit ST25DV16K I2C RFID EEPROM Breakout - STEMMA QT / Qwiic
·
The Adafruit ST25DV16K is a unique I2C-programmable RFID EEPROM breakout that works with mobile phones as an ISO/IEC 15693 (13.56 MHz) NFC tag, but can be dynamically rewritten over I2C by a microcontroller. This makes it ideal for projects where you need to change tag content on the fly — for ex...
Adafruit NeoPixel LED Strip Starter Pack - 30 LED meter - Black
·
Everything you need to get started with NeoPixel LED strips in one convenient pack. Includes a 1-metre NeoPixel strip with black flex PCB, power supply, and connectors — just add a microcontroller and you're ready to go. With minimal or no soldering required, this starter pack is the fastest way...
Clear Enclosure for Arduino or Metro
·
This simple but effective enclosure will fit any 'classic Arduino' shaped development board - we've tested it for sure with the Arduino UNO R3, Adafruit Metro and Adafruit Metro Express. It's clear so you can see all your onboard LEDs and silkscreen labels. There are four small screws you ca...
Adafruit NeoPixel LED Strip Starter Pack - 30 LED meter - White
·
Everything you need to get started with NeoPixel LED strips in one convenient pack. Includes a 1-metre NeoPixel strip with white flex PCB, power supply, and connectors — just add a microcontroller and you're ready to go. Also available with a black flex PCB. With minimal or no soldering required...
DIN Rail Mount Bracket for Raspberry Pi / BeagleBone / Arduino
·
An aluminium mounting bracket for installing microcontrollers and single-board computers onto standard DIN rail. Ideal for simplifying wiring in control panels, enclosures, and industrial-style builds. No soldering required — simply mount your board using the included M2.5 standoffs. Compatibili...
Piunora Lite Carrier for Raspberry Pi 4 Module by Diodes Delight
·
Piunora by Diode Delights is a compact, easy-to-use development board for electronics prototyping with Linux. It has a familiar form factor, legible pin labels, and a design that’s well suited to space-constrained applications.As a carrier board for the Raspberry Pi Compute Module 4 (CM4), Piuno...
Adafruit WINC1500 WiFi Shield with PCB Antenna
·
Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption with TLS 1.2 for secure connections, and communicates over SPI at speeds up to 12...
Adafruit 1.8 Color TFT Shield w/microSD and Joystick
·
The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. This R3-format shield works with any Arduino or Metro board including the Metro M...
Adafruit NeoPXL8 Friend - 8 x Strands NeoPixel Level Shifter
·
Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 independent NeoPixel outputs, with a breadboard-friendly form factor that works with ...
Adafruit DS3231 Precision RTC - STEMMA QT
·
The Adafruit DS3231 Precision RTC with STEMMA QT connectors is a highly accurate I2C real-time clock featuring an integrated temperature-compensated crystal oscillator (TCXO). Unlike standard RTCs that rely on an external 32 kHz crystal, the DS3231 houses the crystal internally alongside a temper...
Adafruit OPT4048 Tri-Stimulus XYZ Color and Lux Sensor
·
A modern take on the common RGB colour sensor — the OPT4048 provides true CIE XYZ tri-stimulus output so you can match readings directly to standard colour spaces. It also calculates colour temperature (based on CIE) and lux measurements up to 144 kLux, making it suitable for everything from dim ...
USB cable - A/MicroB [3ft]
·
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long