All Products

SKU: LB-EAGLED-LED-G

EagLED LEDs were made for e-textiles! This is a simple pack of green wearable leds that are still attached to one another. Simply snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up! It is made in Australia and is a lower cost e-textiles led alternativ...

SKU: LB-EAGLED-LED-O

EagLED LEDs are purpose-built for e-textiles and wearable projects. This pack of 10 orange sewable LEDs come attached to each other on a snappable strip — simply break them apart as needed and sew them into clothing, accessories, or whatever you can dream up. Made in Australia, they're a cost-eff...

SKU: LB-EAGLED-LED-R

Made here in Sydney these are our very own EagLED LED - Red in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. These have large sew tabs so that you can put your conductive thread through seve...

SKU: LB-EAGLED-LED-W

The EagLED is a sewable white LED designed and made in Sydney. Each pack contains 10 LEDs connected in a snap-apart strip, so you can break them off as needed for your project. Large sew tabs allow you to loop conductive thread through multiple times for a secure connection to fabric. The thin P...

SKU: LB-EAGLED-LED-Y

EagLED yellow sewable LEDs designed for e-textiles and wearable electronics. These Australian-made LEDs come attached in a strip — simply snap them apart and sew into clothing, accessories, or fabric projects using conductive thread. A lower-cost alternative to LilyPad LEDs. Each LED lights up w...

SKU: LB-EAGLED

EagLED is Little Bird's wearable development kit — a complete Arduino-compatible microcontroller on a snappable board with built-in LEDs, a light sensor, push button, and battery holder. Snap apart the components, sew them onto fabric, and bring your wearable project to life. With built-in USB s...

SKU: LB-EAGLED-BUZZ

EagLED is Little Bird Electronics' wearable development kit: an Arduino-compatible microcontroller board with LEDs, a light sensor, push button and buzzer built into a snippable PCB for e-textile projects.Built-in USB support lets you program and power the board from a computer. It works with the...

SKU: LB-EAGLED-BUZZ-KIT

The EagLED is Little Bird Electronics' own Arduino-compatible wearable development kit, designed from the ground up for e-textile projects. It packs a microcontroller, LEDs, light sensor, push button, and buzzer onto a snippable board — with snap-off satellite boards for eyes, stars, and hearts t...

SKU: JU-W-LP275 · MPN: JU-W-LP275

A colourful hard enamel lapel pin for book lovers who can't resist a good read. Featuring a gold-backed finish and presented on a Jubly-Umph backing card, this limited-edition pin is the perfect way to declare your love of books — and your tendency to lose track of time while reading. Key Featur...

SKU: LB-LR0149

The EasyDriver is a simple stepper motor driver board based on the Allegro A3967 IC. It accepts a digital step/direction input (3.3 V or 5 V logic) and drives bi-polar stepper motors (4, 6, or 8 wire) at any voltage within the 7–30 V supply range. The board features adjustable current control fr...

SKU: SF-ROB-12779

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The E...

SKU: AF-3716

Can we find a more concise, more colorfully illustrated handbook than Make: Easy Electronics by Charles Platt? Doubtful. We carry a number of his more advanced guidebooks, but this 50-page volume really simplifies the building blocks of maker fundamentals. The illustrations are amazing, and make ...

SKU: EC-CDE82664E

The EasyESP-1 is a beginner-friendly development board for the ESP8266 Wi-Fi microcontroller, based on the ESP-12E module. It includes an onboard USB-to-serial converter (CP2102) so you can program and debug directly over USB — no additional hardware required. All GPIO pins are broken out to 2.5...

SKU: SF-COM-15453

Do you make time to talk to your Arduino? Maybe you should! The EasyVR 3 Plus Shield is a voice recognition shield for Arduino boards integrating an EasyVR module. This kit includes the EasyVR 3 Plus Module, the Arduino SHield Adapter, microphone, and headers. With all of these parts, everything ...

SKU: DF-SEN0235

The DFRobot 360 degree rotary encoder module is based and designed on the EC11 rotary encoder button. The module has three signal terminals: terminals A & B are encoder output; terminal C is the button signal output. It is quite suitable for applications such as a volume knob and varying ligh...

SKU: AF-3880

We really enjoy our DC gear motors (a.k.a "TT Motor") but unless you have a 3D printer it can be a challenge to get something attached to the axle. That's why we've got this Eccentric TT Motor Hub - it gives you 2 x hexagonal holes and two circle holes. It's a very good solution to...

SKU: DF-FIT0424

The ECell Breadboard-Plugin Capacitor pack provides common capacitor values in a breadboard-friendly module format. Each capacitor is mounted on a small PCB with gold-plated pins that plug directly into standard breadboard tie-points — no bent leads or jumper wires needed. Capacitance values, po...

SKU: DF-KIT0098

INTRODUCTION Breadboard-Plugin Components Pack is a new kit designed for breadboard experiment. It provides many kinds of components, such as resistors, capacitors, diodes, transistor .etc. The module pins are using gold-plating technology, solid and durable. It coul...

SKU: DF-FIT0428

The ECell Breadboard-Plugin Connector is a reusable adapter that lets you plug common components neatly into a solderless breadboard. Gold-plated 0.64 mm pins perfectly match standard breadboard tie-points for reliable, durable connections without deforming pins or tie-points. Each connector is ...

SKU: DF-FIT0426

INTRODUCTION Introducing "The Breadboard-Plugin Kit" - the first kit in the ECell series. The Breadboard-Plugin Kit provides a range of common components such as resistors, capacitors, diodes, transistors etc. that are compatible with a solderless breadboard. This Di...