All Products

SKU: SF-COM-11636

Are you trying to make a quick dime from electronics? Why limit yourself to dimes? This coin acceptor will take up to 6 different kinds of coin! Whether you’re building your own arcade cabinet or just charging admission to your house, this programmable coin acceptor makes it easy to monetize your...

SKU: SF-PRT-00337

CR1225 lithium metal 3V 12mm 47mAh coin cell batteries. Perfect small battery for miniature sensor node applications. These batteries are sold in single units.

SKU: SF-PRT-11928

The CR2025 is a 20mm lithium coin cell battery rated at 3V with a 165 mAh capacity. At just 2.5mm thick, it's 0.7mm thinner than the more common CR2032, making it ideal for applications where space is at a premium. A reliable choice for remote controls, calculators, key fobs, and other compact e...

SKU: SF-PRT-00338

CR2032 Lithium metal 3V 250mAh button cell battery. Great for powering low power processors or blink an LED for weeks at a time. Note: This item is non-returnable. If this item arrives damaged or is not functioning properly, please do not hesitate to contact us to see if further actions may be ta...

SKU: SF-PRT-07948

A through-hole 12mm coin cell battery holder for PCB mounting. Uses friction to hold the battery securely in place — the metal housing is positive (+) and the PCB pad underneath is negative (−). Commonly used for RTC backup, SRAM backup, and GPS modules. Key Features Through-Hole Mount – Solde...

SKU: SF-PRT-10592

This is the SMD version of PRT-07948, which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is connected to the negative side.

SKU: SF-DEV-08822

A 20 mm coin cell battery holder designed for CR2032 batteries. The holder features a pop-in, pop-out mechanism for easy battery changes, and the mounting feet include small holes for sewing onto fabric — making it suitable for e-textile and wearable electronics projects as well as standard PCB u...

SKU: SF-PRT-00783

Basic 20mm coin cell holder. Posts can be inserted into 0.1" perf board! Holds the common CR2032 type batteries.

SKU: SF-PRT-11892

Now for all of your coin cell battery surface mount needs, the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the battery and the PCB pad underneath is connecte...

SKU: LB-PRT-12618

An enclosed coin cell battery holder for two CR2032 batteries wired in series, delivering up to 6 V output. The holder features a built-in on/off slide switch and two 150 mm (6″) power leads (positive and negative). A secure screw-down enclosure with two Phillips head screws keeps batteries safel...

SKU: SF-DEV-13883

Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no f...

SKU: LB-COINBOARD

In compliance with Australian laws addressing the potential hazards associated with coin cell batteries, especially for small children, we're thrilled to present our innovative alternative – the Micro-USB Powered Coin Cell Battery Board. Say goodbye to the risks associated with coin cells, as...

SKU: AF-1494

Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then s...

SKU: AF-3907

A colour-coded 2×20 pin header for the Raspberry Pi Zero and Zero W that makes it easy to identify pin functions at a glance. Each pin group is colour-coded so you can quickly find power, ground, and GPIO pins without counting or consulting a pinout diagram. Colour Coding Red – 5 V Yellow – 3...

SKU: IT-IM140806001

This RGB LED dot-matrix driver is Arduino-compatible and designed for driving colourful LED matrix displays with hardware PWM support.It pairs the M54564 with a DM163 constant current driver, giving three 8+6-bit channels of hardware PWM control and freeing the ATmega328P from handling LED PWM in...

SKU: AF-1009

A pack of 15 colourful round tactile button switches in five colours — blue, grey, yellow, green, and red (3 of each). Each momentary switch comes with a snap-on round plastic cap for a clean, colour-coded look. Designed for PCB mounting but also usable on solderless breadboards. Specifications ...

SKU: AF-1010

Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed.These buttons are bigg...

SKU: SF-LCD-00570

This is the itty-bitty connector for the Nokia color LCD. 10-Pins. Surface mount. Hard to find. 0.5mm pitch so be careful. Can it be soldered by hand? Yes! Owen managed to solder wire wrap wire to the individual legs for testing - but then again, he’s a magician. We can solder it well with a good...

SKU: PI-COM1111

Colour-coded GPIO pins that make locating that ground or power connection you need super simple! These 40-pin 2x20 male headers from our friends at The Pi Hut can be used on a Raspberry Pi Zero and are colour-coded for your prototyping convenience. You'll never have to search for a ground pin ...

SKU: LB-EYE-COLOUR

Looking for something extra to jazz up your papercraft, cardboard or  robotics project? We spy with our little eyes these Coloured Eye Stickers - they'll will make an excellent addition to your craft supplies! Eye caramba, are we making a spectacle of ourselves? These puns are getting c...