All Products

SKU: LB-SOLAR

A compact micro solar cell rated at 1.5 V and 400 mA (0.65 W peak), ready to use with pre-soldered anode and cathode wires. Its small 80×60 mm form factor makes it well suited for DIY solar projects, battery charging experiments, and powering small loads like motors, LEDs, and light bulbs. Key F...

SKU: LB-SOLAR-M

A compact micro solar panel rated at 1.5 V and 400 mA (0.65 W peak), fitted with pre-soldered male jumper wires for direct breadboard use. Its small 80×60 mm form factor makes it easy to integrate into DIY solar projects and prototyping setups. Key Features 1.5 V / 400 mA Output – 0.65 W peak ...

SKU: TB-MP3480

The Jaycar MP-3480 is a compact, regulated 5VDC 3A switchmode plug pack with a slim profile designed to fit side-by-side on a powerboard. It accepts 100–240VAC 50/60Hz input (AU/NZ 2-pin plug) and comes with 7 interchangeable DC output plugs to suit a wide range of devices. Australian safety app...

SKU: TB-TH2020 · MPN: TH2020

Great for quick and easy low stress repairs to timber, cardboard, paper and many household materials. It is fast, easy and simple to use with trigger controlled glue feed. Uses 7mm diameter glue sticks which are easily fed into the rear of the unit.Includes 2 x 7mm glue sticks. Packs of glue stic...

SKU: LB-LS0199

A colourful assortment of 160 miniature tactile push buttons in eight different colours, neatly organised in a handy storage container. Perfect for adding colour-coded inputs to your electronics projects. Key Features 8 Colours – Red, yellow, orange, blue, green, white, black, and purple 20 B...

SKU: LB-LR0567

A large 1660-point solderless breadboard with plenty of room for advanced prototyping. Features a sturdy black aluminium backing plate, three binding posts for external power connections, and accepts a wide range of wire gauges. Key Features 1660 Tie Points – 1260 across two terminal strips pl...

SKU: EF-EF03012

A compact 16-channel relay module using HUIKE mini-relays, providing optocoupler-isolated control of up to 16 independent circuits. Despite having 16 channels, the board is close in size to a standard 8-channel relay module thanks to the mini-relay form factor. Each channel has a dedicated LED i...

SKU: WS-30795 · MPN: 30795

The Waveshare Modbus POE ETH Relay 16CH is an industrial-grade 16-channel relay module controlled over Ethernet using Modbus RTU or Modbus TCP protocol. It features dual Ethernet ports for cascading, Power over Ethernet (PoE) support to IEEE 802.3af, and optocoupler-isolated relay drivers with fl...

SKU: SF-COM-00299

The Texas Instruments CD74HC4067 is a 16-channel analogue multiplexer/demultiplexer IC. It allows you to route one of 16 analogue signals to a single common pin (or vice versa) using just 4 digital control lines plus an enable pin — effectively expanding a single ADC channel to read from 16 sourc...

SKU: PL-973

A 20" (50 cm) 16-conductor ribbon cable with IDC connectors on both ends. Ideal for connecting to 16-pin character LCDs, shrouded box headers, and other 2×8 pin interfaces in electronics projects. Specifications Conductors – 16 Connector Type – IDC (both ends) Length – 20" (~50 cm) Pin Pitc...

SKU: M5-U026

The M5Stack 16-Key Capacitive Touch Unit is a Makey Makey-inspired input device built around an ATmega328P microcontroller. It detects capacitive touch across 16 key pads, allowing you to turn everyday objects — fruit, foil, water, or anything conductive — into touch-sensitive buttons. A built-in...

SKU: AF-1873

A 16 MHz ceramic resonator with built-in load capacitors, providing a simple clock source for microcontrollers. The 3-pin package has 0.1" (2.54 mm) pin spacing for direct breadboard use — connect the two outer pins to XTAL-in and XTAL-out (the package is symmetric, so either outer pin works for ...

SKU: AF-2215

A 16.000 MHz quartz crystal in the HC49/US short-style package, supplied with two 20pF load capacitors. The crystal provides higher precision than ceramic resonators, with 30 PPM tolerance and 50 PPM stability — suitable for USB timing, long-term timekeeping, and RF/PLL/VCO applications. The bre...

SKU: PI-COM-OSC-16MHZ

A 16 MHz quartz crystal oscillator in the HC49/4H through-hole package. Provides an accurate timing signal for microcontrollers and digital circuits, and is ideal for ATmega328P-based projects where you want to take an Arduino Uno design to a permanent PCB. External load capacitors (30pF) are re...

SKU: DF-FIT0828

A 16mm telephoto lens designed for the Raspberry Pi High Quality Camera and Jetson Nano 12.3MP camera module. With a narrow field of view and manual focus, this lens is ideal for capturing distant subjects with clarity. The C-mount lens screws directly into the HQ Camera module. A C/CS adapter r...

SKU: AF-3949

A compact steel ball caster that provides smooth, omnidirectional movement for small robots and wheeled projects. With a 16mm overall height, it's well-suited as a third support point for two-wheeled robot chassis. Easy to mount with two screw holes spaced approximately 10.5mm apart — compatible...

SKU: AF-1476

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the lig...

SKU: AF-1477

A 16mm illuminated pushbutton with a built-in blue LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently...

SKU: AF-1443

A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the li...

SKU: AF-1440

A 16mm illuminated pushbutton with a built-in green LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...