All Products
Showing 1961-1980 of 8659 products · 2507 unavailable products hidden
Arduino Leonardo Microcontroller
Arduino Line Trace Sensor Module
Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Blue
Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Green
Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Red
Arduino Mega 2560 R3
Arduino Mega 2560 Rev3
Arduino Micro
Arduino Mini 05
Arduino Motor Shield R3
Arduino Nano BLE Sense Rev2
Arduino Nano BLE Sense Rev2 with Headers
Arduino Nano ESP32
Arduino Nano ESP32 with headers
Arduino Nano ESP32 with Headers
MPN: DEV-23321
Arduino Nano Every
MPN: DEV-15590
Arduino Nano IO Sensor Shield
Arduino Opta Lite Micro PLC (Ethernet and USB-C ports)
Arduino Opta RS485 Micro PLC (Ethernet and USB-C ports, RS485)
MPN: DFR1058
Arduino Opta WiFi
Arduino Leonardo Microcontroller
The Arduino Leonardo is a microcontroller board based on the ATmega32U4, offering the same flash, RAM, and capabilities as the ATmega328 found in the Uno. The key difference is built-in USB communication, allowing the Leonardo to appear as a keyboard, mouse, or serial device to a connected comput...
Arduino Line Trace Sensor Module
The Line Trace Sensor Module uses an infrared emitter/detector pair to measure the reflectivity of a surface below it. When the reflectivity exceeds an adjustable threshold, the output goes low — making it ideal for building line-following robots and edge-detection systems. The onboard potentiom...
Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Blue
A pack of 10 blue straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female headers, and pre-crimped jumper wires. Each strip can be easily snapped into smaller s...
Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Green
A pack of 10 green straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female headers, and pre-crimped jumper wires. Each strip can be easily snapped into smaller ...
Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Red
A pack of 10 red straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female headers, and pre-crimped jumper wires. Each strip can be easily snapped into smaller se...
Arduino Mega 2560 R3
The Arduino Mega 2560 R3 is a microcontroller board based on the ATmega2560, offering significantly more I/O than standard Arduino boards. With 54 digital I/O pins, 16 analog inputs, and 4 hardware serial ports, it's the go-to board for complex projects that demand extensive connectivity. The R3...
Arduino Mega 2560 Rev3
The Arduino Mega 2560 Rev3 is a microcontroller board based on the ATmega2560, offering significantly more I/O than standard Arduino boards. With 54 digital I/O pins, 16 analog inputs, and 4 hardware serial ports, it's the go-to board for complex projects that demand extensive connectivity. The ...
Arduino Micro
The Arduino Micro is the smallest board in the Arduino family, based on the ATmega32U4 with built-in USB. Its compact breadboard-friendly form factor makes it easy to integrate into everyday objects and interactive projects. Like the Leonardo, it can emulate a keyboard, mouse, or other USB HID de...
Arduino Mini 05
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, ...
Arduino Motor Shield R3
INTRODUCTION The Arduino Motor Shield is based on L298 (a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors). It helps you drive two DC motors with Arduino board as well as control the speed and direction of the ...
Arduino Nano BLE Sense Rev2
The Arduino Nano 33 BLE Sense Rev2 packs a powerful nRF52840 processor, Bluetooth 5.0, and an impressive array of on-board sensors into the compact Nano form factor. With a 9-axis IMU, microphone, gesture/light/proximity sensor, barometric pressure, temperature, and humidity sensors built in, it'...
Arduino Nano BLE Sense Rev2 with Headers
The Arduino Nano BLE Sense Rev2 packs the nRF52840 processor (32-bit ARM Cortex-M4 at 64 MHz) into the compact Nano form factor, with 1MB flash and 256KB SRAM. It includes Bluetooth 5.0, an impressive array of onboard sensors, and support for TinyML — enabling edge AI and machine learning applica...
Arduino Nano ESP32
The Arduino Nano ESP32 brings the ESP32-S3 into the familiar Nano form factor, supporting both Arduino and MicroPython programming. Based on the u-blox NORA-W106-10B module, it features Wi-Fi and Bluetooth Low Energy with a built-in antenna, making it ideal for IoT projects. The board runs a 32-...
Arduino Nano ESP32 with headers
The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point for IoT, Wi-Fi, and Bluetooth projects with the full backing of the Arduino eco...
Arduino Nano ESP32 with Headers
· MPN: DEV-23321
Bring ESP32-S3 wireless projects into the Arduino ecosystem with this compact Nano-format development board. It is designed for IoT, MicroPython and Arduino programming, making it suitable for first builds through to more advanced prototypes.The board is based on the u-blox® NORA-W106-10B module,...
Arduino Nano Every
· MPN: DEV-15590
Bring everyday builds to life quickly with this small, robust Arduino board in the classic Nano footprint. It is designed for fast prototyping and compact projects, from experiments and wearables through to cosplay, robotics, drones and 3D printing.The board is based on the ATMega4809 AVR process...
Arduino Nano IO Sensor Shield
The Arduino Nano I/O Sensor Shield acts as an expansion board for the Arduino Nano and DFRduino Nano microcontrollers. There are several different options for power input. The form factor of the Nano I/O Shield board is the same as the Arduino UNO/arduino Leonardo. In addition, the sensor shi...
Arduino Opta Lite Micro PLC (Ethernet and USB-C ports)
Arduino Opta, specially designed for PLC engineers, is a secure, easy-to-use micro PLC with industrial IoT capabilities. Opta is equipped with frequently used networks and protocols in multiple industries, and supports both Arduino sketch and standard PLC languages, including LD (Ladder Logi...
Arduino Opta RS485 Micro PLC (Ethernet and USB-C ports, RS485)
· MPN: DFR1058
##Introduction Arduino Opta, specially designed for PLC engineers, is a secure, easy-to-use micro PLC with industrial IoT capabilities. Opta is equipped with frequently used networks and protocols in multiple industries, and supports both Arduino sketch and standard PLC languages, including LD (...
Arduino Opta WiFi
Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities. Designed in partnership with Finder – leading industrial and building automation device manufacturer – Opta allows professionals to scale up automation projects while leveraging the Arduino ecosystem. Supporting bot...
