All Products

SKU: SF-COM-08184

A compact 3-way surface-mount navigation switch commonly found in handheld devices like MP3 players. The switch provides up, down, and centre-press (select) actions in a single low-profile package — ideal for menu navigation interfaces in custom electronics projects. Key Features 3-Way Navigat...

SKU: SF-COM-10860

A simple SMD slide switch. Perfect for when you need access to a setting or a power switch from the edge of a PCB buried deep within a project. Features: 4V - 300mA 70mOhm resistance 10,000 cycle life Documents: Datasheet

SKU: AF-5454

For projects that need a rotary encoder but need to keep it single-sided or need to avoid interrupting traces or devices on the other side, here's an all-SMT rotary encoder! It's a high-quality 30-detents encoder from Alps, with detents and a nice feel. There's a nice smooth bushing for p...

SKU: LB-LS5532

A stainless steel double-deck tracked tank chassis designed for robotics projects. The rugged construction handles off-road terrain while the dual-layer design provides ample mounting space for circuit boards, sensors, and other components. Powered by TT motors with a 48:1 reduction ratio for str...

SKU: AF-752

This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on our SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece of hardware with your own software. We're specifically selling it so you can solder it onto our nRF52 Feather to add SWD debu...

SKU: AF-2743

This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming.  It's helpful for using products like the JTAGulator, STLink or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector, often ...

SKU: SF-CAB-15364

A 150mm (~6") 10-conductor ribbon cable with 2×5 pin female connectors on both ends, using standard 1.27mm (0.05") pitch. Ideal for SWD (Serial Wire Debug) and JTAG connections between debug probes and target boards. Specifications Length – 150mm (~6") Conductors – 10 Connectors – 2×5 pin fe...

SKU: AF-1863

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendly breakout. There's two ground pins, one 'switched' power pin, and one pin that ...

SKU: AF-2591

I know you just did a double take when looking at this power supply, what's up with the two cables? Normally you have a switching power supply that plugs into the wall and provides something like 5V or 9V or 12V regulated DC. This split power supply is interesting in that it gives you two power s...

SKU: TB-MP3490

Regulated output voltage, small size and higher power output make these AC adaptors suitable for thousands of different applications. Features: Slimline design Supplied with 7 plugs

SKU: AF-5118

Kailh Choc switch sockets let you build hot-swappable mechanical keyboards and keypads — snap switches in and out without soldering. Perfect for prototyping custom low-profile keyboard layouts or experimenting with different switch types. Key Features Hot-Swappable – Snap Choc switches in and ...

SKU: TB-ST0358

A miniature DPDT toggle switch with a momentary-off-momentary (mom–off–mom) action. The toggle springs back to the centre-off position when released from either direction, making it suitable for joystick-style controls, motor direction switching, and momentary signal routing. Features solder tag...

SKU: WS-21667

SX1262 LoRa Node Module For Pico LoRaWAN Protocol Support Features At A Glance The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing prob...

SKU: WS-20682

The Pico-LoRa-SX1262-868M is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262, which supports LoRaWAN protocol and EU868 band. It is allowed to connect the TTN, TTS servers through a LoRa gateway to use LoRa Cloud service fast and easily. Standard Raspberry Pi Pico heade...

SKU: EC-CRF12784L

This AI-Thinker LoRa module is built on the Semtech SX1278 chip and operates at 433 MHz with a communication range of up to 10 km. Using Semtech's patented LoRa modulation technology, it achieves an exceptional sensitivity of −148 dBm with +20 dBm (100 mW) transmit power, delivering long-range, l...

SKU: EC-ALR00002A

Ra-02 is a wireless transmission module based on SEMTECH's SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the function of air wake-up Consumption. The SX1278 RF modul...

SKU: AF-1750

The Synthetos gShield (formerly grblShield) V5 is a 3-axis CNC stepper motor driver shield for Arduino. Designed as a complete hardware companion for the grbl CNC motion control firmware, it turns an Arduino Uno into a capable CNC controller for mills, routers, laser cutters, and other motion-con...

SKU: PL-1073

This is a basic, general-purpose blue LED in a standard T1 (3mm) package with 0.1" lead spacing.

SKU: PL-1071

This is a basic, general-purpose green LED in a standard T1 (3mm) package with 0.1" lead spacing.

SKU: PL-1070

This is a basic, general-purpose red LED in a standard T1 (3mm) package with 0.1" lead spacing.