All Products

SKU: KS-SNAKE

A western-themed soft enamel pin featuring a snake oil miracle elixir potion bottle design. Waterproof and UV resistant with black metal plating and two rubber backing posts for secure attachment. Key Features Soft Enamel – Textured finish with black metal plating Waterproof & UV Resistant – ...

SKU: AF-5619

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not require any crimping!These are 1 to 1 wire blocks: there is one separate input a...

SKU: AF-5616

A lever-action wiring block connector with one input and five outputs, ideal for quick power or signal fan-outs without soldering, crimping, or tools. Snap the lever open, insert the wire, and snap it closed for a secure connection. Reusable and compatible with both stranded and solid-core wire f...

SKU: AF-5618

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not require any crimping!This is a 3 to 3 wire block: there are three separate inpu...

SKU: AF-5614

Snap action wiring blocks make it easy to connect and split wires without soldering, crimping, or tools. This 3-to-9 block has three colour-coded inputs (green, yellow, red), each fanning out to three matching outputs — perfect for basic power or data distribution. Each lever-action terminal acc...

SKU: AF-866

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Each block connector has a metal block inside and three levers that snap open and close to bind stranded/solid-core wire. No screwdrivers required! They'...

SKU: AF-5617

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not require any crimping!This is a 5 to 5 wire block: there are five separate input...

SKU: AF-874

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Each block connector has a metal block inside and five levers that snap open and close to bind stranded/solid-core wire. No screwdrivers required! The...

SKU: AF-5620

Keep your snap action wiring block connectors neat and tidy with these orange buckles. Simply snap each side onto a block connector to hold multiple blocks together in an organised row — no tools required. Key Features Snap-On Design – Click onto snap action block connectors to keep wiring tid...

SKU: PL-1403

This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the long lever arm makes it especially useful as a tactile bump sensor for your robot (e.g whiskers or antennae). The switch body dimension is 20.0 x 6.4 x 10.2 mm, ...

SKU: AF-739

This construction set empowers budding engineers to create over 100 diverse electronic circuit projects using just 30+ electronic components. Children can build functional prototypes of a photo sensor, a blinking light, an Adjustable-Volume siren, and many other exciting models! The STEM kit i...

SKU: AF-4055

This snap-in panel mount USB A extension cable lets you run a USB port through an enclosure wall without screws or drilling mounting holes. Cut a rectangular opening in your panel, snap the connector in, and the integrated bezel covers any rough edges for a clean finish. Both ends are standard U...

SKU: AF-6072 · MPN: ADA6072

A snap-in panel mount cable with a USB Type A socket on one end and bare power wires on the other. Perfect for adding a USB-A charging or power port to project enclosures without screws or drilling — just cut a rectangular hole and snap it in. The compact panel mount connector fits into a cutout...

SKU: AF-4052

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB A plug connector, and other is a USB C socket with special over-molding. What's...

SKU: AF-6073 · MPN: ADA6073

This snap-in panel mount USB cable is perfect for adding a USB host connection to your project enclosure. On one end, it features a compact USB Type-A connector designed for easy snap-in panel mounting—no screws or drilling required. The other end has a convenient wire pigtail with power, ground,...

SKU: AF-4054

This panel mount cable will allow you to enclose a device that has an HDMI port. Perfect for placing your project in a secure box. Both ends have HDMI connectors, an extension cord if you will.What's special about this, you ask? It's a Snap-In Panel Mount Cable - much easier than a classic panel ...

SKU: AF-6124 · MPN: ADA6124

This custom-designed 3D-printed enclosure is made specifically for the Adafruit bq25185 USB/DC/Solar Charger with 3.3V Buck board. The snap-together design requires no screws or glue — simply press the two halves together for a secure fit that protects your board during use and transport. The en...

SKU: AF-6126 · MPN: ADA6126

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate all the connectors. No screws or glue are required; simply snap the board into the...

SKU: AF-6241 · MPN: ADA6241

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer lines or surface imperfections. No screws or glue required — simply snap the Fe...

SKU: AF-6057 · MPN: ADA6057