All Products

SKU: DF-SER0062

A high-torque brushless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exceptional durability, while IP67-rated waterproofing — achieved through laminated circuit boards, waterproof gaskets, and breathable composite sealing...

SKU: DF-SER0061

A high-torque coreless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide excellent durability, while IP67-rated waterproofing — achieved through laminated circuit boards, waterproof gaskets, and breathable composite sealing — ...

SKU: DF-FIT0169

A waterproof DC-DC step-down (buck) converter that accepts 16–36V DC input and outputs a stable 9V at up to 5A (45W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics, vehicles, and outdoor installations where reliable voltage regulation is needed. Key Feature...

SKU: AF-1589

A 4700 µF electrolytic capacitor rated for up to 10V. This high-capacitance component is ideal for smoothing voltage spikes and providing current buffering in power supply circuits, servo systems, LED strips, and solar charging setups. Specifications Capacitance: 4700 µF Voltage Rating: 10V ...

SKU: TB-RR0564

A pack of 8 metal film resistors rated at 470Ω and 0.5W (½W). These through-hole axial resistors offer 1% tolerance for accurate circuit design, and are the same physical size as standard ¼W carbon film resistors, making them a drop-in upgrade for higher power handling. Specifications Resistan...

SKU: SF-COM-18279 · MPN: COM-18279

This surface-mount resistor is a simple, reliable passive component for electronics builds, repairs and prototyping. It provides 470 Ohms resistance with ±1% tolerance in a thick film SMD package.Rated for 0.1W / 1/10W, it is suitable for compact PCB designs where a through-hole resistor is not r...

SKU: DF-DFR0835

This 4.7" e-ink display board integrates an ESP32-WROVER-E module (ESP32-D0WDQ6 V3) with 16MB Flash and 8MB PSRAM, providing a complete development platform for low-power e-ink projects. The display supports 16 grayscale levels and partial refresh for faster screen updates. The board features 3 ...

SKU: TB-RR0612

A pack of 8 metal film resistors rated at 47 kΩ and 0.5W (½W). These through-hole axial resistors offer 1% tolerance for accurate circuit design, and are the same physical size as standard ¼W carbon film resistors, making them a drop-in upgrade for higher power handling. Specifications Resista...

SKU: SF-COM-18280 · MPN: COM-18280

This compact SMD resistor is suited to PCB repairs, prototyping and small-batch builds where you need a precise surface-mount passive component.It is a thick-film resistor with ±1% tolerance and a 1/10W power rating, supplied as a single component.A datasheet is available from the manufacturer fo...

SKU: SF-COM-30156 · MPN: COM-30156

This is a basic 47 kOhms through-hole resistor for general electronics prototyping and repairs. It is rated for 1/4 Watt with a ±5% tolerance.The PTH leads make it easy to use with breadboards, perf boards and hand-soldered circuits. It is supplied as a single resistor, handy when you only need o...

SKU: SF-COM-27916 · MPN: COM-27916

This ceramic MLCC capacitor provides 47 pF capacitance with a 50V rating and ±5% tolerance. It uses a C0G/NP0 temperature coefficient, making it suitable where a stable small-value capacitor is required.It is a surface-mount part supplied as a single unit, with a compact 1.60mm x 0.80mm footprint...

SKU: LB-LS5165

A compact TT gearmotor with a 48:1 gear ratio, pre-wired with a 15 cm female JST PH 2.0 connector for plug-and-play integration. TT motors are a popular and affordable choice for small robotics projects, offering a good balance of torque and speed in a lightweight, standardised form factor. The ...

SKU: PL-1145

This battery holder accommodates 4× AAA batteries in series, providing approximately 6V from alkaline cells or 4.8V from NiMH rechargeables. It features wire leads for connecting to your electronics projects. Key Features 4× AAA Configuration – Series connection for 4.8–6V output Wire Leads –...

SKU: LB-LR0051

A 4-channel relay module with opto-isolated inputs for safe, reliable switching of high-power loads. Each relay is rated for up to 10A at 250VAC or 30VDC, making it suitable for controlling lights, motors, heaters, and other mains-powered devices from a microcontroller. The opto-isolators protec...

SKU: DF-DFR0144

This 4-channel relay shield from DFRobot plugs directly onto an Arduino Uno or compatible board, providing opto-isolated relay switching for controlling high-power devices such as lamps, water pumps, and motors. Each relay has its own test button and LED status indicator. The shield features a b...

SKU: EC-ARS27361T

This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handled via the I2C bus, freeing up digital pins for other uses. The stackable design...

SKU: AF-757

This bi-directional logic level converter from Adafruit uses 4× BSS138 FETs with 10K pull-up resistors to safely shift signals between different voltage levels. Unlike many level shifters, this design is fully compatible with I2C's open-drain pull-up signalling, following NXP's recommended applic...

SKU: WS-30461 · MPN: 30461

The Waveshare Modbus RTU 4-Channel Relay Module provides reliable high-current switching for industrial automation over an RS485 bus. Each of the four SPDT relays handles loads up to 30A at 250VAC or 28VDC, making it suitable for controlling motors, lighting, HVAC systems, and other heavy-duty eq...

SKU: DF-DFR0913

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrollers. Each channel features photoelectric isolation for reliable signal separation...

SKU: DF-DFR0914

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 5V, making it easy to interface industrial sensors and PLC outputs with Arduino and other 5V microcontrollers. Each channel features photoelectric isolation for reliable signal separation between high and l...