All Products

SKU: AF-3821

Plastic pop rivets for quick, clean cardboard construction without tape or glue. Simply poke through the cardboard and fasten with the back piece to create sturdy joints and attachments. One rivet creates a rotating joint; two rivets hold pieces firmly in place. Works best with 2-ply cardboard, ...

SKU: AF-3822

Large plastic rivets designed for cardboard construction projects. Instead of tape or hot glue, simply poke through the cardboard and fasten with the back piece for clean, movable joints and secure attachments. Works best with 2-ply cardboard, cardstock, or other paper products approximately 2 m...

SKU: DF-FIT0726

Put on a sturdy and beautiful enclosure for your electronic project!This project box is made from high-quality ABS material, and the surface of the enclosure is sandblasted. There are screws in the package for convenient installation. Aside from that, the “ears” on the enclosure allow you to easi...

SKU: DF-FIT0725

Put on a sturdy and beautiful enclosure for your electronic project!This project box is made from high-quality ABS material, and the surface of the enclosure is sandblasted. There are screws in the package for convenient installation. Aside from that, the “ears” on the enclosure allow you to easi...

SKU: DF-FIT0724

Protect your electronic projects from rain and water splash using this waterproof IP68 enclosure. Made from high-quality ABS material, these boxes are sturdy and terrific for use indoors and outdoors. Each box has a transparent cover with a lid gasket, and there are screws and screw decorative ca...

SKU: DF-FIT0723

Protect your electronics projects from rain and water splash with this IP68-rated waterproof enclosure. Made from sturdy ABS with a transparent polycarbonate lid and silicone gasket, it's built for both indoor and outdoor use. Mounting ears on the enclosure allow easy fixing to walls, poles, or o...

SKU: DF-FIT0036

This is a high quality plastic servo horn. It fits DF series servos. Made specifically for DF series servos. SPECIFICATIONS Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12") Mounting holes: 1.5mm(0.06") DOCUMENTS Dimensions SHIPPING...

SKU: LB-LS01030

The solder vacuums are a great tool for solder rework. They allow you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger, heat up your solder, place the nozzle over the solder you want to remove and finally just push the button. The pisto...

SKU: RP-SC1148-TABS

Broke your rivets? - get a spare!

SKU: AF-997

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2" (Nominal non-taped National Pipe) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and w...

SKU: AF-3984

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small st...

SKU: AF-3290

A platinum resistance temperature detector (RTD) with a 100 Ω resistance at 0°C, offering superior accuracy and long-term stability compared to thermocouples and thermistors. PT100 sensors are widely used in laboratory and industrial temperature measurement where precision and repeatability matte...

SKU: AF-5773

Ostensibly this extension cord was originally designed to allow PlayStation game players to be able to sit across the room from their game system, but what we are using it for is to connect to PS controllers and accessories without soldering directly to cables or cutting the connectors off. Since...

SKU: DF-FIT0475

This plywood case is a solid enclosure for your LattePanda Windows 10 SBC. The case protects the board from ESD damage while letting you see status LEDs and providing access to USB, HDMI, SD card, GPIO and antenna. Printed assembly instructions are provided and case assembly can be complete...

SKU: M5-K023

The PM2.5 Air Quality Kit combines a PMSA003 laser particulate sensor with an SHT20 temperature and humidity sensor in a single M5Stack-compatible module. It measures ambient particulate concentration, temperature, and humidity — making it ideal for air quality monitoring deployments. The PMSA00...

SKU: AF-3686

Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 Air Quality Sensor with Breadboard Adapter particulate sensor. Mad Max & Furiosa definitely should have hooked up one of these in their truck while scavenging the dusty desert wilderness...

SKU: AF-4505

The PMSA003I is a compact particulate matter sensor that measures PM1.0, PM2.5, and PM10.0 concentrations using laser scattering. Unlike most PM sensors that use UART, this version features an I2C interface, making it straightforward to use with Arduino, Raspberry Pi, and other microcontrollers w...

SKU: AF-364

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort...

SKU: AF-850

When we're on the go, we like to keep a multimeter in our purse and this model is by far the best pocket meter we've found. It's so good you'll end up using it as your main multimeter! First up, this meter can measure nearly everything: it's got DC and AC voltage, resistance, diode, and beeping ...

SKU: AF-2374

Have you ever wanted comprehensive information on a diverse amount of subjects in a pocket sized, well-organized format...and not had a cell phone signal or internet connection?Look no further! This pocket reference book is actually incredibly cool - even if you have a smart phone, wear a pair...