All Products
Showing 4381-4400 of 8677 products · 2514 unavailable products hidden
Infrared Proximity Contactless Button
Infrared Proximity Sensor - Sharp GP2Y0A21YK
Infrared Proximity Sensor Short Range - Sharp GP2Y0A41SK0F
Infrared Sensor Jumper Wire - 3-Pin JST
Infrared Thermometer - MLX90614
Inky Frame 4.0" (Pico W Aboard) – Inky Frame + Accessory Kit
Inky wHAT (ePaper/eInk/EPD) Red/Black/White
In-line power cable 1 meter long extension cord (for EL wire)
In-line power switch for 2.1mm barrel jack
Innobits Screwdriver
IN-PI554FCH 5050 Addressable RGB SMD LED - Cut Tape
MPN: COM-26982
Input Shield for Arduino
Insectbot Hexa -An Arduino Based Walking Robot Kit For Kids
Insulated Silicone Soldering Mat
Intelligent Rain Detection Module
Interface Cable for EM408 - 1 Foot
Interface Cable N to RP-SMA Cable - 1m
Interface Cable - RP-SMA Male to RP-SMA Female (10M, RG58)
Interface Cable - RP-SMA Male to RP-SMA Female (1M, RG174)
Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)
Infrared Proximity Contactless Button
This IR proximity contactless button makes for a good replacement for typical push buttons in situations where touching the button isn't required or desirable (especially in this day and age). This button includes a built in microcontroller to handle interference or noise, a red/blue status LED g...
Infrared Proximity Sensor - Sharp GP2Y0A21YK
The Sharp GP2Y0A21YK is an infrared proximity sensor with an analogue voltage output that varies with distance — from 3.1 V at 10 cm to 0.4 V at 80 cm. It uses an IR emitter and position-sensitive detector to measure distance, making it unaffected by the colour or reflectivity of most objects. T...
Infrared Proximity Sensor Short Range - Sharp GP2Y0A41SK0F
Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or solderin...
Infrared Sensor Jumper Wire - 3-Pin JST
Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20 minutes over making your own wiring harness. If you need this cable and ...
Infrared Thermometer - MLX90614
Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge number of applications including body temperature measurment and movement detection....
Inky Frame 4.0" (Pico W Aboard) – Inky Frame + Accessory Kit
A compact Pico W powered E Ink® photo frame / home dashboard / life organiser with super concentrated seven colour display and wireless connectivity. Inky Frame 4.0" features a vibrant E Ink display with 640 x 400 pixels of tightly packed seven colour goodness - that's almost as many pixels as ...
Inky wHAT (ePaper/eInk/EPD) Red/Black/White
Inky wHAT is a 4.2" e-paper display HAT for Raspberry Pi, capable of showing red, black, and white. The EPD display is crisp and readable in bright sunlight, making it perfect for information displays that don't need frequent updates. The display uses electrophoresis to pull coloured particles i...
In-line power cable 1 meter long extension cord (for EL wire)
Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter long, you can of course snap more together if necessary, or cut and re-solder it...
In-line power switch for 2.1mm barrel jack
Add a power switch to any project simply by plugging this between the power supply. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects.Comes with a 5.5/2.1mm barrel jack on one end an a plug on the other. In between is an in-line s...
Innobits Screwdriver
This little screwdriver is used to modify any Bit with a micro adjuster (e.g. pulse, rgb led). This works perfectly with LittleBits or Innobits. These usually in Pink but colour may vary.
IN-PI554FCH 5050 Addressable RGB SMD LED - Cut Tape
· MPN: COM-26982
The IN-PI554FCH is a 5050-size surface-mount RGB LED with an integrated constant-current IC and RGB LED chip, suited to custom PCBs and compact lighting projects.Each LED is supplied as an individual cut-tape unit. It is intended for SMD assembly, so good surface-mount soldering skills and suitab...
Input Shield for Arduino
The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface and the Xbee interface is deisgned to facilitate the realization of wireless ro...
Insectbot Hexa -An Arduino Based Walking Robot Kit For Kids
The Insectbot Hexa is a six-legged walking robot kit based on the Beetle BLE (Arduino-compatible with Bluetooth 4.0). Designed for kids and beginners, this DIY kit teaches soldering, assembly, and basic programming through a hands-on robotics project. Powered by three 9 g micro servos and four A...
Insulated Silicone Soldering Mat
Keeping your workspace clean and well kept has always been a paramount concern for keeping all your possessions well maintained and pristine. With this Insulated Silicone Soldering Mat, you will be provided with the means to protect your desktop, soldering station, or workbench from the superheat...
Intelligent Rain Detection Module
This smart rain sensor offers a fast way to detect rainfall change on glass in real-time free from effects like sunlight, dust, leaves, etc., and feeds back information (no rain, light rain, moderate rain, or heavy rain) to users. The module comes with a tiny body with a diameter of about 12.5m...
Interface Cable for EM408 - 1 Foot
Communication cable, 1 foot in length, that connects with the EM408. The EM408 GPS modules come with a cable. Cable has two a 5-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
Interface Cable N to RP-SMA Cable - 1m
This 1-metre interface cable converts between N-type and RP-SMA connectors, making it ideal for connecting larger LoRa antennas (such as 915MHz antennas with N-type connectors) to devices with RP-SMA ports. The RG316 coaxial cable supports frequencies up to 3GHz. Specifications Connector A: N-...
Interface Cable - RP-SMA Male to RP-SMA Female (10M, RG58)
This is a basic RP-SMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 10M (393.7in.) long with RG58 housing. The RP-SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create st...
Interface Cable - RP-SMA Male to RP-SMA Female (1M, RG174)
An RP-SMA (Reverse Polarity Sub-Miniature A) extension cable with male-to-female connectors and RG174 coaxial housing. Ideal for mounting an antenna to the outside of an enclosure while keeping the electronics inside. Threaded connectors provide secure mechanical connections. Specifications Co...
Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)
A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable RF connection for GPS, cellular, Wi-Fi, and other RF applications. The RP-SMA (R...
