All Products

SKU: AF-1407

The squarish board with two chips on it is the transmitter (power with 9V).  The longer board is the output and you can connect that to the part of your project that needs powering. Inductive charging is a way of powering a device without a direct wire connection. Most people have...

SKU: DF-FIT0827

The module adopts the standard Modbus RTU protocol, the communication interface supports RS485 or RS232 and supports communication baud rates of 2400, 4800, 9600, 19200, 38400 (default 9600). Each relay output is independent and can be connected to different load devices, such as 220V electric li...

SKU: WS-26244

An RS485-controlled industrial I/O module with 8 isolated digital inputs and 8 open-drain digital outputs, communicating via the Modbus RTU protocol. Multiple protection layers — power isolation, magnetic isolation, TVS diode, and resettable fuse — ensure stable and reliable operation in demandin...

SKU: WS-31284 · MPN: 31282

Built around the ESP32-S3 dual-core processor, this industrial relay module brings local control, networking and edge automation into one DIN-rail friendly unit. It combines 8 relay outputs, 8 digital inputs, isolated CAN, Ethernet, Wi-Fi and Bluetooth for control panels, robotics, smart factorie...

SKU: WS-25029

Industrial Grade CAN/CAN FD Bus Data Analyzer, USB To CAN FD Adapter, CAN/CAN FD Bus Communication Interface Card, CAN/CAN FD Protocol Data Analyzer Industrial Grade CAN FD Bus Adapter Supports high-speed CAN FD and CAN2.0A/B data communication   Features at a glance The USB-CAN-FD is a...

SKU: DF-FIT0772

This is an industrial-grade high-performance RS485 photoelectric isolation repeater that converts one-way RS485 to one-way RS485. Compatible with EIA/TIA RS485 standard, it features asynchronous half-duplex, two-way communication, and complete transparent data transmission. The repeater can reali...

SKU: DF-DFR0929

This industrial-grade 50W high-power step-down module offers a voltage input range of 9-18V and a maximum output of 5V/10A. It has the characteristics of high isolation withstand voltage of 1500V DC or 800V AC, low radiation interference, ripple noise, etc. With short-circuit protection and input...

SKU: DF-FIT0832

This is an industrial-grade USB to RS485 module with a DC voltage output of up to 36V, which is applicable to industrial instruments that require a high-voltage power supply.  The converter can be directly powered by the USB bus, no external power supply required.With strong compatibility, t...

SKU: WS-26517

The Industrial Modbus RTU 8-Channel Relay Module (D) is a reliable RS485-controlled relay module with 8 digital inputs. Designed for industrial applications, it supports the Modbus RTU protocol and includes multiple isolation protections like power, magnetic, and TVS diode isolation. It features ...

SKU: DF-FIT0821

A 4-port RS-485 bus hub with optical isolation and surge protection, designed for industrial environments with complex electromagnetic interference. Each port is independently opto-isolated at 2500 V and protected against 600 W lightning surges, ensuring that a fault on one network segment does n...

SKU: DF-FIT0860

This small portable USB isolator with USB2.0 compatibility provides complete isolation between devices.  Featuring a 12Mbps data transmission rate and 2500V isolation voltage, the industrial USB isolator can be used to protect the USB port of all kinds of devices without connecting exter...

SKU: WS-25219

Industrial USB TO 4Ch RS485 Converter, Multi Protection Circuits, Multi Systems Support, Aluminium Alloy Case, Wall-Mount & Rail-Mount Support Industrial USB TO 4CH RS485 Communication Module Stable Transmission | Multi Devices | Multi Systems ...

SKU: WS-23949

The USB to RS485/422 is an industrial-grade isolated converter designed for reliable and stable communication. Featuring an original FT232RL chipset and SP485EEN transceiver, it ensures fast, interference-free data transmission. The unit includes multiple protective circuits such as power isolati...

SKU: JU-W-LP253

When you’re exhausted, run down or low you just need a little time to recharge. But explaining that to people takes energy you don’t have. Wear this lapel pin to let everyone know that your battery is low and you need some time to get your spark back! This colourful, gold-backed, hard enamel lape...

SKU: SF-SEN-19018

An Infrared detector is a detector that reacts to infrared (IR) radiation. These simple devices operate at 940nm and work well for generic IR systems including remote control and touch-less object sensing. Using a simple ADC on any microcontroller will allow variable readings to be collected from...

SKU: DF-FIT0032

INTRODUCTIONA This bracket is designed for Gravity: Arduino Adjustable Infrared Distance Sensor which can be used for the obstacle avoidance or objection detection. It provides a easy installation of sensor on various robot platforms or other interactive media devi...

SKU: SF-SEN-18772

An Infrared emitter, or IR emitter, is a source of light energy in the infrared spectrum. This little part is a light emitting diode (LED) that is used in order to transmit infrared signals from a remote control. This simple device operates at 940nm and works well for generic IR systems. This emi...

SKU: SF-COM-26984 · MPN: COM-26984

This compact IR emitter is a light emitting diode designed to transmit infrared signals, such as those used in remote control and generic IR communication projects.It operates at 940nm, making it suitable for common infrared receiver systems. Like any LED, it should be used with an appropriate cu...

SKU: DF-SEN0556

An infrared proximity sensor that detects objects at distances of 10 ±5 mm to 80 ±20 mm by measuring reflected IR energy. It outputs a simple high/low digital signal, making it easy to integrate with Arduino and other microcontrollers. The sensor features strong ambient light rejection, fast res...

SKU: DF-SEN0366

This is a cost-effective IR laser distance sensor that features high accuracy, long-distance detection, visible IR laser, and small FOV. It offers the measuring ranges 0.05~80m for indoor use and 0.05~50m outdoor. With serial port output, it is compatible with all kinds of controller boards like ...