All Products

SKU: DF-SEN0327

A compact digital MEMS microphone module based on the MSM261S4030H0 chip, providing 24-bit I2S digital audio output. The built-in I2S interface connects directly to DSPs and microcontrollers without requiring an external codec, simplifying audio capture designs. An on-board SK9822 RGB LED provide...

SKU: LB-IBIS

Micro:bit Power Supply Module 3.3V 2A is a kind of power module for micro:bit. The output voltage of 3.3v can be connected directly to the battery connector of the micro:bit, providing strong and steady power supply for micro:bit. Packing List 1 x Micro:bit Power Supply Module 3.3V 2A  ...

SKU: DF-FIT0978

The ICE Tower Cooler is a high-performance tower-style cooling solution designed specifically for the Raspberry Pi 5. It features a tall aluminium heatsink with multiple fins for maximum surface area, topped with an adjustable-speed fan and RGB lighting. The fan automatically adjusts its speed b...

SKU: DF-FIT0652

A tower-style CPU cooler for the Raspberry Pi, combining a 5mm copper heatpipe, multi-layer aluminium heat sinks, and a 7-blade fan to significantly reduce operating temperatures. Under overclocking conditions, it can bring the Pi's temperature down from around 80°C to approximately 40°C. Compat...

SKU: SF-CAB-09741

These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of different colors (black, red, white, blue, and green). We use them with the Bus P...

SKU: AF-2203

An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 16 pin 0.3" wide version. Best used with chips that have 16 pins (2x8) and have 0.3" pin spacing. These are often used for soldering into a Perma Proto ...

SKU: AF-2204

An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 20 pin 0.3" wide version. Best used with chips that have 20 pins (2x10) and have 0.3" pin spacing. These are often used for soldering into a Perma Proto...

SKU: AF-2207

These 40-pin IC sockets let you insert and remove DIP chips without soldering them directly to your PCB. Solder the socket into your board once, then swap chips freely — useful for prototyping, testing, or any project where you may need to replace an IC. Key Features 40-Pin DIP Socket – Fits 4...

SKU: SF-COM-13153

This IC test clip provides a secure, hands-free connection to all eight leads of a small outline integrated circuit (SOIC-8). Gold-plated upper and lower contacts ensure reliable electrical connections for testing and programming surface-mount ICs. Place your SOIC-8 chip in the lower contacts, a...

SKU: AF-2101

The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B.  It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard o...

SKU: AF-2105

This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...

SKU: AF-2102

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre of a breadboard and a male header that plugs into the top of the socket. A prac...

SKU: AF-2104

This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...

SKU: SF-CAB-29458 · MPN: CAB-29458

This IDC ribbon cable is a handy interconnect for compact electronics projects that use a 2mm pitch, 2x3-pin layout. At 120mm long, it is suited to short board-to-board runs inside enclosures or between nearby modules.The pre-terminated ribbon format helps keep wiring neat and repeatable compared...

SKU: SF-COM-27925 · MPN: COM-27925

Keep your project powered through power-supply hot swaps with this compact ideal diode breakout from SparkFun. It provides reliable one-way voltage control for dynamic power selection and switchover, over-voltage protection, and designs that need a stable power input.The board breaks out four cha...

SKU: AF-5391

If you're messing around with floppy drives, or disk drives, or other devices that are usually powered with a PC motherboard you'll often see these big 'Molex' connectors used to provide power. They are used to give 5V (red), 12V (yellow) and ground (black) and with this connector you can easily ...

SKU: AF-5365

A 30 cm cable with a standard 4-pin Molex connector, designed to tap into the 5V or 12V DC power rails of an AT or ATX power supply. Perfect for powering electronics projects directly from a desktop PSU. The connector mates with the standard hard drive/CD-ROM power cables found on ATX supplies, ...

SKU: SF-TOL-25564 · MPN: TOL-25564

Keep screws, tiny parts and tools under control during electronics builds and repairs. This handy organiser is useful on any workbench, helping you separate parts as you disassemble, service or assemble delicate devices.The tray includes 20 small compartments for tiny components and screws, plus ...

SKU: SF-TOL-25572 · MPN: TOL-25572

Prevent electrostatic damage with the iFixit Anti-Static Wrist Strap. This tools helps protect your electronics from accidental electrostatic discharge (ESD) damage during repairs. Ground yourself while working on sensitive electronics to prevent static charge build-up. Custom manufactured by iFi...

SKU: AF-5911 · MPN: ADA5911

This anti-static wrist strap is great for electronic work and repair, especially delicate or ESD-sensitive work. Ground yourself while working on sensitive electronics to prevent static charge build-up!The Anti-Static Wrist Strap features an elastic band with an adjustable buckle, ensuring a snug...