All Products

SKU: SF-SEN-15050

The SparkFun Triad Spectroscopy Sensor combines three AS7265x spectral sensors with onboard UV, visible, and IR LEDs to measure light across 18 individual frequencies — from 410 nm (UV) to 940 nm (IR). It brings light spectroscopy to the desktop, allowing you to measure and characterise how diffe...

SKU: SF-GPS-23286 · MPN: GPS-23286

The SparkFun Triband GNSS RTK Breakout features the UM980 GNSS high precision RTK position module from Unicore Communications. The UM980 is a 1408-Channel GNSS Receiver based on the Nebulas IV™ that is able to simultaneously track GPS L1/L2/L5, GLONASS L1/L2, Galileo E1/E5a/E5b/E6, Beidou B1I/B2I...

SKU: SF-SEN-09269

Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption - only 320uA! The sensor has a full sensing ran...

SKU: SF-SEN-09836

This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital output data is formatted as 16-bit twos complement and is accessible through ei...

SKU: SF-SEN-11446

A breakout board for the Analog Devices ADXL362, a 3-axis MEMS accelerometer that operates at ultra-low power consumption. It measures both dynamic acceleration (motion, shock) and static acceleration (tilt), and communicates over SPI. Built-in digital logic enables autonomous "wake-on-shake" ope...

SKU: SF-SEN-21208

The SparkFun Qwiic BMA400 Triple Axis Accelerometer Breakout offers a 3-axis acceleration sensor perfect for ultra-low-power applications on an easy-to-use Qwiic breakout board. Dubbed the first "real" ultra-low power acceleration sensor, the BMA400 is perfect when used in both wearable and smart...

SKU: SF-SEN-17871

This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX132 digital accelerometer from Kionix. The KX132 is a low-power, 16-bit resolution three-axis accelerometer with four user-selectable acceleration measurement ranges of ±2g/4g/8g/16g and has up to a 10kHz (max) ...

SKU: SF-SEN-17589

This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX134 digital accelerometer from Kionix. The KX134 is a low-power, 16-bit resolution three-axis accelerometer capable of measuring ±8g/16g/32g/64g (user-selectable) and has up to a 10kHz output data rate making i...

SKU: SF-SEN-13963

The SparkFun LIS3DH breakout is a low-power, three-axis accelerometer with 12-bit resolution, ideal for adding motion and orientation detection to your projects. It communicates over I2C or SPI and includes three additional analogue inputs and built-in movement detection features such as tap, dou...

SKU: SF-SEN-17241

The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Digital output data...

SKU: SF-SEN-22638

The SparkFun Tristimulus Color Sensor is built around the Texas Instruments OPT4048DTSR — a high-speed, high-precision four-channel colour sensor. Three channels closely match the CIE 1931 tristimulus XYZ spectra with excellent IR rejection, while a fourth wide-band channel provides broad spectra...

SKU: SF-SEN-24805

The SparkFun Qwiic Ultrasonic Distance Sensor, a user-friendly upgrade to the popular HC-SR04 sensor, offers non-contact distance measurement from 2cm to 400cm with an accuracy of 3mm. This sensor is designed to seamlessly integrate with the Qwiic ecosystem for I2C communication, making it a bree...

SKU: SF-BOB-15100

Add a USB-C connector to your project without wrestling with tiny SMD pads. This breakout board routes the USB-C connector's key pins to a standard 0.1" pitch header, making it straightforward to integrate into breadboards and custom PCB designs. Breaks out VBUS, GND, CC1, CC2, D+, and D− — cove...

SKU: SF-DEV-21247

The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, digital cameras, Bluetooth dongles, game controllers, and more. This version up...

SKU: SF-PRT-12711

The SparkFun USB LiPoly Charger is a single-cell Li-Ion/Li-Polymer battery charging board based on the MCP73831T. It charges 3.7V LiPo cells at a selectable rate of 500 mA or 100 mA via a solder jumper, with power input from either USB or a barrel jack connector. The board includes a SYS OUT JST...

SKU: SF-BOB-10031

We have no idea what USB device you are hooking up to, but if you want to access the microUSB port on something, you might want this. We broke out all 5 pins with a vertical microUSB connector for your prototyping needs. Documents: Schematic Eagle Files GitHub

SKU: SF-CAB-11301

A 6-foot (1.8 m) USB 2.0 cable with a Type-A plug on one end and a Mini-B 5-pin plug on the other. Use it to connect cameras, USB hubs, FTDI programmers, LiPo chargers, and other devices that use the Mini-B connector. Specifications Connector A – USB Type-A (male) Connector B – USB Mini-B 5-p...

SKU: SF-SWG-14658

With the cost of microSD cards on a consistent rise, it’s always useful to have an economical and reliable option as a backup for storing your files. This sleek, red 16GB thumb drive has been emblazoned with our SparkFun Electronics logo and our moniker to Start Something! Each thumb drive featu...

SKU: SF-BOB-12731

This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPROM, and a 28-pin SSOP package this is a serious little chip. With this version...

SKU: SF-BOB-12700

This simple breakout board routes a female USB Type-A connector's VCC, GND, D−, and D+ pins to a standard 0.1″ pitch header. It saves you the hassle of soldering tiny SMD connectors when adding USB host or device connectivity to your project. Key Features Female USB Type-A Connector – Accepts ...