All Products

SKU: LB-LS0112-60

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 60 RPM at 12V. The higher gear ratio provides increased torque at lower speed, making it well-suited for applications needing slow, controlled movement. This variant does not include a speed encoder. Key Features 60 RPM ...

SKU: DF-FIT0277

The DFRobot 12V Low Noise DC Motor (Model 28PA51G) is a quiet, high-torque geared motor with a built-in two-phase hall encoder. Designed for applications where noise is a concern, it produces approximately 57–68 dBA under no-load conditions — making it well suited for indoor robotics and equipmen...

SKU: LB-LR0214-16

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (included) for measurement across a wide range of −50 to 110°C. The relay operate...

SKU: DF-FIT0498

This 12V normally closed solenoid valve controls water flow through a 1/2″ (DN15) inlet and outlet. It remains closed when unpowered and opens when 12V is applied — no polarity distinction is required. Pair it with a Gravity Water Flow Sensor (1/2″) for real-time flow monitoring in automated syst...

SKU: SF-ROB-10456

This 12V DC solenoid valve controls water flow through a 3/4″ threaded inlet and outlet. It is normally closed — fluid is blocked until 12V is applied to the fast-on spade connectors on the solenoid coil. Connect it to a pressurised water source such as a garden hose or mains supply for automated...

SKU: PL-4945

The Pololu U3V16F12 is a compact switching step-up (boost) voltage regulator that generates a fixed 12V output from input voltages as low as 1.3V (after start-up). It handles continuous input currents up to approximately 1.5A with a typical efficiency of 85–95%, making it ideal for battery-powere...

SKU: TB-MP3312

This 12W switchmode plug pack features manually selectable voltage output (3V, 5V, 6V, 7.5V, 9V, or 12V DC) at up to 1000 mA, plus a built-in USB-A output socket for charging or powering USB devices. It comes with 7 interchangeable DC plugs to suit a wide variety of barrel connector sizes. The s...

SKU: LB-LR0244

This general-purpose 130-size hobby motor runs on 3–6V and spins at 4,000–8,000 RPM depending on the input voltage. Its compact size and 2 mm shaft make it well suited for small robotics projects, fan-powered cars, and other DIY builds. Specifications Voltage – 3–6V DC Speed – 4,000 RPM @ 3V ...

SKU: WS-24777

A compact 1.32-inch OLED display module with 128×96 resolution and 16 levels of greyscale. The ultra-narrow bezel and onboard voltage translator make it easy to integrate into space-constrained projects. Built around the SSD1327 driver chip, it supports both 4-wire SPI and I2C interfaces for fle...

SKU: WS-17391

The Waveshare 13.3″ Magic Mirror is a smart mirror display powered by a built-in Raspberry Pi 3A+. Behind a one-way mirror panel, a 13.3″ IPS touchscreen (1920×1080) displays customisable information — news, weather, time, calendar, and more — while still functioning as a regular mirror. Touch co...

SKU: AF-921

This blank 13.56 MHz RFID/NFC silicone bracelet contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The embedded chip and antenna are passively powered — no battery is needed. Simply hold the bracelet a few centimetres from a compatible 13.56 MHz RFID/NFC reader to read or wri...

SKU: AF-359

This blank 13.56 MHz RFID/NFC card contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The standard credit-card-sized form factor (ISO 7810 ID-1) makes it suitable for access control badges, identification systems, and RFID prototyping. The embedded chip and antenna are passiv...

SKU: AF-4034

This blank 13.56 MHz RFID/NFC card contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The standard credit-card-sized form factor makes it suitable for access badges, information sharing, and NFC prototyping. The embedded chip and antenna are passively powered — no battery is need...

SKU: AF-361

This blank 13.56 MHz RFID/NFC clear tag is a compact disc-shaped token commonly used for laundry tracking, garment identification, and asset tagging. The transparent housing makes the embedded antenna coil visible. The chip and antenna are passively powered — no battery is needed. The tag contai...

SKU: AF-5458

This blank 13.56 MHz RFID/NFC clear tag contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The compact transparent disc form factor is commonly used for laundry tracking, asset identification, and general-purpose NFC tagging. The chip and antenna are passively powered — no batter...

SKU: AF-362

This blank 13.56 MHz RFID/NFC sticker contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The thin adhesive-backed form factor makes it easy to stick onto equipment, packaging, shelves, or any smooth surface for contactless identification and tracking. The embedded chip and an...

SKU: AF-4032

This blank 13.56 MHz RFID/NFC sticker contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The thin adhesive-backed form factor (4 × 2.5 cm) makes it easy to apply to equipment, packaging, shelves, or any smooth surface. The embedded chip and antenna are passively powered — no batt...

SKU: AF-6441 · MPN: ADA6441

These use an NTAG chipset, a 'Type 2' tag usable with any smartphone. Unlike "Classic 1K" cards (a.k.a. MiFare S50s), these tags are more secure and work with almost any phone with RFID support, since they avoid the patent issues with MiFare, which require an NXP chipset or a license fee.One of e...

SKU: AF-360

This blank 13.56 MHz RFID/NFC white tag is a compact disc-shaped token commonly used for laundry tracking, garment identification, and asset tagging. It contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The chip and antenna are passively powered — no battery is needed. The ...

SKU: AF-4033

This blank 13.56 MHz RFID/NFC white tag contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The compact white disc form factor is commonly used for laundry tracking, garment identification, and general-purpose NFC tagging. The chip and antenna are passively powered — no battery is...